Articles with "p3ht" as a keyword



Photo from wikipedia

Reversible Doping and Photo Patterning of Polymer Nanowires

Sign Up to like & get
recommendations!
Published in 2020 at "Advanced Electronic Materials"

DOI: 10.1002/aelm.202000469

Abstract: Recent development of dopant induced solubility control (DISC) patterning of polymer semiconductors has enabled direct‐write optical patterning of poly‐3‐hexylthiophene (P3HT) with diffraction limited resolution. Here, the optical DISC patterning technique to the most simple circuit… read more here.

Keywords: doping photo; patterning polymer; reversible doping; p3ht ... See more keywords
Photo by des0519 from unsplash

Double/single phase segregation and vertical stratification induced by crystallization in all‐crystalline tri/diblock copolymers and homopolymer blends of poly(3‐hexylthiophene) and poly(ethylene glycol)

Sign Up to like & get
recommendations!
Published in 2017 at "Surface and Interface Analysis"

DOI: 10.1002/sia.6202

Abstract: Distinct stratified and non-stratified morphologies were developed in poly(3-hexylthiophene) (P3HT) and poly(ethylene glycol) (PEG)-based homopolymer blends and diblock and triblock copolymer systems. By applying X-ray photoelectron spectroscopy, only a double-percolation mechanism including assembling of P3HT… read more here.

Keywords: homopolymer blends; phase; poly hexylthiophene; crystallization ... See more keywords
Photo from wikipedia

Long-Range Ordered Organic Bulk-Heterojunction: C60 and O-IDTBR Single Crystals Penetrated by Crystalline P3HT Fibrous Networks.

Sign Up to like & get
recommendations!
Published in 2023 at "Small"

DOI: 10.1002/smll.202302046

Abstract: The long-range ordering of bulk-heterojunctions (BHJs) significantly facilitates exciton diffusion and dissociation as well as charge transport. A feasible bio-inspired strategy to realize such a heterostructure is crystallization in gel media where the growing host… read more here.

Keywords: single crystals; range ordered; long range; range ... See more keywords
Photo from wikipedia

Efficient P3HT:SWCNTs hybrids as hole transport layer in P3HT:PCBM organic solar cells

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Materials Science: Materials in Electronics"

DOI: 10.1007/s10854-018-8974-7

Abstract: The effects of non-treated and acid treated single wall carbon nanotubes (SWCNTs) were investigated as hybrids with P3HT and P3HT:PCBM blend using UV–Vis absorption spectra, XRD, AFM, SEM, electrical conductivity as well as photovoltaic characteristics… read more here.

Keywords: hole transport; p3ht pcbm; transport layer; p3ht swcnts ... See more keywords
Photo from wikipedia

Structural Stability and Optical Studies of Poly(3-hexylthiophene) in an ITO/PEDOT:PSS/P3HT Interface

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Electronic Materials"

DOI: 10.1007/s11664-018-6550-9

Abstract: An interface between poly(3-hexylthiophene) (P3HT) and poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT:PSS) was prepared in LiClO4-–acetonitrile (ACN) over indium-doped tin oxide (ITO), known as the ITO/PEDOT:PSS/P3HT system. This system was compared with ITO/P3HT with the aim… read more here.

Keywords: interface; p3ht; pedot pss; spectroscopy ... See more keywords
Photo from wikipedia

Electronic structure of P3HT film oxidized by ultraviolet–ozone treatment

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of the Korean Physical Society"

DOI: 10.1007/s40042-021-00216-w

Abstract: Recently, solution-processable polymeric semiconductors have been applied in various optoelectronic devices. To improve the surface properties of polymeric films, ultraviolet–ozone (UV–O3) treatment is commonly used. However, the electronic structures of polymeric films altered by UV–O3… read more here.

Keywords: ozone treatment; p3ht; treatment; ultraviolet ozone ... See more keywords
Photo from wikipedia

Developing near-infrared quantum-dot light-emitting diodes to mimic synaptic plasticity

Sign Up to like & get
recommendations!
Published in 2019 at "Science China Materials"

DOI: 10.1007/s40843-019-9437-9

Abstract: The quantum-dot light-emitting diodes (QLEDs) that emit near-infrared (NIR) light may be important optoelectronic synaptic devices for the realization of artificial neural networks with complete optoelectronic integration. To improve the performance of NIR QLEDs, we… read more here.

Keywords: near infrared; quantum dot; emitting diodes; light emitting ... See more keywords
Photo by jordanmcdonald from unsplash

Synthesis of MoS2/MoO3 or P3HT nanocomposites consisting of sandwich-like structures via environmental benign supercritical fluid CO2 and its use in supercapacitor

Sign Up to like & get
recommendations!
Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2019.107355

Abstract: Abstract Environmental friendly supercritical fluid CO2 technique has been used to synthesize MoS2/nanobelt MoO3 and MoS2/nanowire Poly(3-hexylthiophene) (P3HT) nanocomposite using commercial MoS2 and P3HT powders, and hydrothermally synthesized MoO3 as the precursor materials. Two unique… read more here.

Keywords: mos2 p3ht; supercritical fluid; mos2; mos2 moo3 ... See more keywords
Photo from wikipedia

A novel nanocomposite based on NiOx-incorporated P3HT as hole transport material for Sb2S3 solar cells with enhanced device performance.

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of colloid and interface science"

DOI: 10.1016/j.jcis.2018.10.015

Abstract: To achieve superior photovoltaic performance on Sb2S3 solid state solar cells (ssSCs), the concomitant development of efficient hole transport materials (HTMs) is required. Herein, a novel solution processed HTM obtained by mixing NiOx nanoparticles (NiOx-NP)… read more here.

Keywords: hole transport; hole; sb2s3; performance ... See more keywords
Photo from wikipedia

Strong photoluminescence enhancement of silicon nanowires by poly(3-hexylthiophene) deposition

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Luminescence"

DOI: 10.1016/j.jlumin.2019.116805

Abstract: Abstract Silicon nanowires (SiNWs) layer was obtained by one-step metal-assisted chemical etching method. In order to improve the optical properties of SiNWs, we deposited poly(3-hexylthiophene) (P3HT) polymer on its surface. P3HT polymer has been deposited… read more here.

Keywords: silicon nanowires; poly hexylthiophene; deposition; silicon ... See more keywords
Photo from wikipedia

Fabricated Cu2Zn SnS4 (CZTS) nanoparticles as an additive in P3HT: PCBM active layer for efficiency improvement of polymer solar cell

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Luminescence"

DOI: 10.1016/j.jlumin.2021.118420

Abstract: Abstract We report the fabrication of copper zinc tin sulfide, Cu2ZnSnS4, nanoparticles by a solvothermal method. We synthesized a polymer matrix-based organic hybrid photovoltaic active layer using poly (3-hexyle thiophene) (P3HT) [ 6 , 6… read more here.

Keywords: polymer; czts; active layer; pcbm ... See more keywords