Dynamics and structure development for biaxial stretching PA6/MXD6 blend packaging films
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21955
Abstract: The biaxial stretching polyamide 6 (PA6) film is widely used for food and industrial products packaging, because it has good physical properties, such as high toughness, high tensile strength, heat resistance, solvent resistance, hard wearing… read more here.
Keywords: pa6; biaxial stretching; gas barrier; film ... See more keywords
Relationship Between The Co-Continuous Morphology of Immiscible Polymer Blends and the Structure of An In Situ Formed Graft Copolymer.
Sign Up to like & getrecommendations! Published in 2023 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202300141
Abstract: Suitable compatibilizers are essential to prepare immiscible polymer blends with stable co-continuous morphologies. From the thermodynamic point of view, such compatibilizer should not only reduce the interfacial tension, but also promote the formation of flat… read more here.
Keywords: copolymer; polymer blends; situ formed; immiscible polymer ... See more keywords
Delamination of sodium montmorillonite in PA6 in the presence of melamine polyphosphate
Sign Up to like & getrecommendations! Published in 2017 at "Polymers for Advanced Technologies"
DOI: 10.1002/pat.4063
Abstract: This study describes the influence of melamine polyphosphate (MPP) flame retardant addition on layered structure of virgin sodium montmorillonite (MMT) in PA6/MMT system obtained in extrusion process. It was found that the extrusion of the… read more here.
Keywords: mpp; pa6 mmt; sodium montmorillonite; pa6 ... See more keywords
From hybrid fibers to microfibers: The characteristics of polyamide 6/polypropylene blend via one‐step twin‐screw melt extrusion
Sign Up to like & getrecommendations! Published in 2020 at "Polymer Engineering and Science"
DOI: 10.1002/pen.25327
Abstract: Multimaterial textiles are frequently employed to attain a certain function or aesthetic effect. The multimaterial assemblies face recycling limitations due to challenges to sort and separate the component materials. A one‐step melt extrusion approach to… read more here.
Keywords: melt extrusion; hybrid fibers; one step; pa6 ... See more keywords
Effect of thermal annealing on crystallinity and mechanical strength of textile glass and carbon fiber reinforced in situ polymerized ϵ-caprolactam parts
Sign Up to like & getrecommendations! Published in 2018 at "Microsystem Technologies"
DOI: 10.1007/s00542-017-3317-9
Abstract: Fiber reinforced thermoplastic (FRTP) is a promising material for automobiles, airplanes, construction, home appliances and so on. In situ polymerized polyamide (PA6) is a representative polymer material for FRTP. When ϵ-caprolactam (ϵ-CL) is polymerized in… read more here.
Keywords: strength; crystallinity; crystallinity mechanical; fiber reinforced ... See more keywords
Antibacterial modification of nylon-6 nanofibers: structure, properties and antibacterial activity.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Polymer Research"
DOI: 10.1007/s10965-017-1365-6
Abstract: Antibacterial nylon 6 (PA6) nanofibers have been prepared in one-step procedure using Nanospider technology. Chlorhexidine (CHX), 1-dodecyltrimethylamonium bromide (DTAB) and benzyltrimethylamonium bromide (BTAB) have been used as antibacterial agents. Samples were characterized by a series… read more here.
Keywords: antibacterial activity; btab; antibacterial modification; pa6 ... See more keywords
Tribological and flame retardant modification of polyamide-6 composite
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Central South University"
DOI: 10.1007/s11771-019-3984-z
Abstract: A series of wear and flame resistant polyamide 6 (PA6) composites were prepared using glass fiber (GF) and talc (T) as reinforcer, polytetrafluoroethylene (PTFE) and graphite (Gr) as solid lubricants, red phosphorus (RP) and zinc… read more here.
Keywords: property; tribological flame; flame retardant; retardant modification ... See more keywords
In-situ microfibrillar PP–PA6 composites: rheological, morphological and mechanical properties
Sign Up to like & getrecommendations! Published in 2017 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-017-1469-y
Abstract: In this study, the rheology, morphology and mechanical properties of microfibrillar composites based on polypropylene reinforced with polyamide 6 (PA6) fibres have been investigated. Influence of different factors such as the PA6 composition and drawing… read more here.
Keywords: situ microfibrillar; microfibrillar pa6; microfibrillar composites; mechanical properties ... See more keywords
Mechanically robust and abrasion-resistant polymer nanocomposites for potential applications as advanced clearance joints
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2019.105607
Abstract: Abstract Despite exceptional dimensional stability, polyamide 6 (PA6) still suffers relatively low mechanical strength and stiffness as compared with metallic and ceramic materials, which thus significantly limits its engineering applications. Herein, we have demonstrated the… read more here.
Keywords: anti wear; pa6; robust abrasion; clearance ... See more keywords
The microstructure regulation, strengthening, toughening and hydrophilicity of polyamide6 in fabricating poly (vinylidene fluoride)-based flat membrane via the thermally induced phase separation technique
Sign Up to like & getrecommendations! Published in 2020 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2020.109568
Abstract: Abstract The poly (vinylidene fluoride) (PVDF)/polyamide6 (PA6) flat blend membrane was prepared via thermally induced phase separation (TIPS) process using water-soluble diluent mixture. The function of PA6 to induce the non-solvent induced phase separation (NIPS)… read more here.
Keywords: phase; phase separation; induced phase; pa6 ... See more keywords
Preparation and characterization of super-toughened PA6/r-PVB blends with “transplanted” multicore morphology by reactive compatibilization
Sign Up to like & getrecommendations! Published in 2021 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2020.110173
Abstract: Abstract Super-toughened polyamide 6 (PA6) material was fabricated by applying a feasible and effective method involving reactive melt blending of PA6 and residue of plasticized poly(vinyl butyral) (r-PVB)/maleated poly(ethylene-1-octene) (POE-g-MA) masterbatch, in which the multicore… read more here.
Keywords: pa6 pvb; poe; pvb; pa6 ... See more keywords