Efficient Removal of Methylene Blue by Novel Magnetic Hydrogel Nanocomposites of Poly(acrylic acid)
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21665
Abstract: In the current research, the sonochemically prepared magnetite nanoparticles (MNPs) were silylated with triethoxyvinylsilane to produce a core–shell structure containing vinyl moieties on the surface. The radical polymerization of the silylated product with acrylic acid… read more here.
Keywords: adsorption; hydrogel; novel magnetic; acrylic acid ... See more keywords
Enhanced water flux through graphitic carbon nitride nanosheets membrane by incorporating polyacrylic acid
Sign Up to like & getrecommendations! Published in 2018 at "Aiche Journal"
DOI: 10.1002/aic.16076
Abstract: Membranes assembled from two-dimensional (2D) layered materials have shown potential use in water purification. Recently, a 2D graphitic carbon nitride (g-C3N4) nanosheets membrane exhibit considerable separation performance in water purification. In this study, to further… read more here.
Keywords: separation performance; water; nanosheets membrane; graphitic carbon ... See more keywords
Cationic polymer precipitation for enhanced impurity removal in downstream processing.
Sign Up to like & getrecommendations! Published in 2023 at "Biotechnology and bioengineering"
DOI: 10.1002/bit.28416
Abstract: Precipitation can be used for the removal of impurities early in the downstream purification process of biologics, with the soluble product remaining in the filtrate through microfiltration. The objective of this study was to examine… read more here.
Keywords: purification; paa; removal; cationic polymer ... See more keywords
Synthesis and Biodegradation Studies of Low-Dispersity Poly(Acrylic Acid).
Sign Up to like & getrecommendations! Published in 2022 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202100773
Abstract: Poly(acrylic acid) (PAA) is produced on an industrial scale and widely-used in applications such as personal care products and cleaning formulations that end up "down-the-drain." Relatively high molecular weight PAA is considered poorly biodegradable, but… read more here.
Keywords: paa; synthesis; molecular weight; acrylic acid ... See more keywords
Collaborative Design of Hollow Nanocubes, In Situ Cross-Linked Binder, and Amorphous Void@SiOx @C as a Three-Pronged Strategy for Ultrastable Lithium Storage.
Sign Up to like & getrecommendations! Published in 2019 at "Small"
DOI: 10.1002/smll.201905736
Abstract: Although silicon-based materials are ideal candidate anodes for high energy density lithium-ion batteries, the large volumetric expansion seriously damages the integrity of the electrodes and impedes commercial processes. Reasonable electrode design based on adjustable structures… read more here.
Keywords: void siox; three pronged; amorphous void; void ... See more keywords
Modification of UHMWPE porous fibers by acrylic acid and its adsorption kinetics for Cu2+ removal
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Bulletin"
DOI: 10.1007/s00289-017-1926-1
Abstract: Polyacrylic acid-grafted ultrahigh molecular weight polyethylene (UHMWPE-g-PAA) fibers were prepared by radiation-induced grafting of acrylic acid onto UHMWPE porous fibers and were examined for Cu2+ removal from aqueous solutions. The developed fibers were characterized using… read more here.
Keywords: uhmwpe paa; adsorption; paa fibers; acrylic acid ... See more keywords
Insight into the structure of oppositely charged surfactant–polymer system by dielectric spectroscopy
Sign Up to like & getrecommendations! Published in 2017 at "Colloid and Polymer Science"
DOI: 10.1007/s00396-017-4180-z
Abstract: AbstractThe interaction between polymer (poly(acrylic acid)) and surfactant 12-2-12 (ethanediyl-1,2-bis(dimethyldodecylammonium bromide)) in aqueous solution was investigated by dielectric relaxation spectroscopy (DRS) over a frequency range from 40 Hz to 110 MHz. To better understand the interaction, the… read more here.
Keywords: polymer; surfactant solution; solution; paa ... See more keywords
Preparation and dielectric properties of order nanoporous TiO2/PAA film
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-04674-z
Abstract: Polycrystalline order nanoporous TiO2/PAA (porous anodic alumina) composite films have been prepared by reactive DC magnetron sputtering technique at room temperature. The crystalline phase and morphology of the deposited film were investigated by X-ray diffraction… read more here.
Keywords: tio2 paa; dielectric properties; order nanoporous; paa ... See more keywords
Annealing temperature dependence of structural, optical, and thermal properties of CdSe thin films grown on porous anodic alumina
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-017-4550-5
Abstract: In this study, cadmium selenide (CdSe) were synthesizd by a chemical route process using l-cysteine (l-cyst) as a ligand, cadmium acetate as a Cd source and Na2SeO3 as a Se precurseur. CdSe nanocrystals were embedded… read more here.
Keywords: cdse; paa; spectroscopy; porous anodic ... See more keywords
Effect of PAA-coated magnetic nanoparticles on the performance of PVA-based hydrogels developed to be used as environmental remediation devices
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Nanoparticle Research"
DOI: 10.1007/s11051-019-4499-0
Abstract: In the present work, the effect of the incorporation of polyacrylic acid (PAA)–coated magnetic nanoparticles (MNPs) on the performance of polyvinyl alcohol (PVA)–based hydrogels for water remediation was studied. Ferrogels from PVA and PAA-coated MNPs… read more here.
Keywords: magnetic nanoparticles; remediation; effect; paa coated ... See more keywords
Design, Preparation and Evaluation of HPMC-Based PAA or SA Freeze-Dried Scaffolds for Vaginal Delivery of Fluconazole
Sign Up to like & getrecommendations! Published in 2017 at "Pharmaceutical Research"
DOI: 10.1007/s11095-017-2226-z
Abstract: PurposeAim of this work was preparation of bioadhesive gel formulations based on Hydroxypropyl methylcellulose (HPMC), Poly(acrylic acid) (PAA) or Sodium alginate (SA) loaded with anise/fluconazole β-cyclodextrin inclusion complexes in 1:2 and 1:3 ratios intended for… read more here.
Keywords: hpmc based; cyclodextrin inclusion; based paa; paa ... See more keywords