An Abaqus plugin for evaluation of the Auxetic structure performance
Sign Up to like & getrecommendations! Published in 2021 at "Engineering With Computers"
DOI: 10.1007/s00366-021-01295-w
Abstract: The behavior of Auxetic structures is highly dependent on the geometric parameters of the unit cell. To achieve the desired behavior, it is necessary to perform a parametric study on the unit cell. A conventional… read more here.
Keywords: performance; abaqus plugin; parametric study; plugin ... See more keywords
Evaluation of theranostic perspective of gold-silica nanoshell for cancer nano-medicine: a numerical parametric study
Sign Up to like & getrecommendations! Published in 2018 at "Lasers in Medical Science"
DOI: 10.1007/s10103-018-2608-4
Abstract: Using gold-silica nanoshell as a reference nano-agent, this work has performed preliminary numerical parametric study to investigate the feasibility and if feasible the efficiency of using a single nano-agent to achieve theranostic goals. In total,… read more here.
Keywords: medicine; agent; gold silica; silica ... See more keywords
A parametric study on out-of-plane instability of doubly reinforced structural walls. Part I: FEM predictions
Sign Up to like & getrecommendations! Published in 2020 at "Bulletin of Earthquake Engineering"
DOI: 10.1007/s10518-020-00828-w
Abstract: The research presented here seeks to address the key parameters influential on out-of-plane (OOP) instability of rectangular walls, which was observed in the 2010 Chile and the 2011 New Zealand earthquakes in some well-confined modern… read more here.
Keywords: doubly reinforced; response; structural walls; plane ... See more keywords
Torsion strengthening of RC beams using CFRP (parametric study)
Sign Up to like & getrecommendations! Published in 2017 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-016-0156-7
Abstract: The previous experimental work conducted by the author and others for torsion strengthening of RC beams using CFRP is extended analytically in this paper using non-linear finite element analysis. A detailed parametric study is done… read more here.
Keywords: strengthening beams; beams using; torsion strengthening; using cfrp ... See more keywords
Process parametric study for COD removal of electroplating industry effluent
Sign Up to like & getrecommendations! Published in 2018 at "3 Biotech"
DOI: 10.1007/s13205-017-1059-0
Abstract: This paper investigated the effects of parameters, like inoculum size (15, 10 and 5% of the working volume of the reactor), gas velocities (0.0027, 0.00342 and 0.0068 m/s), bed heights (0.3, 0.6 and 0.9 m), static bed… read more here.
Keywords: cod reduction; process parametric; reduction process; process ... See more keywords
Electrocoagulation for the treatment of highly sulfidic spent caustic: parametric study followed by statistical optimization
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Environmental Science and Technology"
DOI: 10.1007/s13762-020-02890-y
Abstract: Spent caustic wastewater from petrochemical industries is a complex concoction of various pollutants, not only making it a threat to the environment, but also very difficult to treat using conventional treatment processes. In this study,… read more here.
Keywords: spent caustic; removal; treatment; electrocoagulation ... See more keywords
Parametric study of the 5d3, 5d26s and 5d26p configurations in the Lu I isoelectronic sequence (Ta III–Hg X) using orthogonal operators
Sign Up to like & getrecommendations! Published in 2018 at "Atomic Data and Nuclear Data Tables"
DOI: 10.1016/j.adt.2017.04.001
Abstract: Abstract Data available on the 5d 3 , 5d 2 6s and 5d 2 6p configurations in the Lu I isoelectronic sequence have been critically reviewed by means of calculations with the orthogonal operators. The… read more here.
Keywords: isoelectronic sequence; configurations isoelectronic; study; orthogonal operators ... See more keywords
A parametric study of the acoustic properties of thermal cladding systems
Sign Up to like & getrecommendations! Published in 2021 at "Applied Acoustics"
DOI: 10.1016/j.apacoust.2020.107656
Abstract: Abstract Thermal cladding systems have developed and modernised since the first systems were implemented, and predictions of single figure sound insulation improvement, ΔRW, based on the natural frequency, f0, of the spring-mass covering may no… read more here.
Keywords: methodology; cladding systems; thermal cladding; parametric study ... See more keywords
A parametric study of a concentrating integral storage solar water heater for domestic uses
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2016.09.127
Abstract: Abstract A parametric study of a concentrating integrated collector storage solar water heater was undertaken. The concentrator used was the Compound Parabolic Concentrator (CPC), an optical non-imaging device, a wider acceptance angle was used (64°)… read more here.
Keywords: study; study concentrating; storage solar; solar water ... See more keywords
Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs
Sign Up to like & getrecommendations! Published in 2019 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2019.03.018
Abstract: Abstract This paper deals with the parametric study of major factors influencing thermal and flow behaviors for delta winglet vortex generator (DWVG) pairs in a circular tube. The investigated parameters include six pitch ratios (PR = P/D = 2.4,… read more here.
Keywords: study major; heat; parametric study; major factors ... See more keywords
Micromechanical finite element parametric study of polyamide 6 based single polymer composites reinforced by woven textile structures
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2019.111088
Abstract: Abstract This study presents a finite element-based micromechanical analysis of woven single polymer composites (WSPC), prepared by compression molding from polyamide 6 (PA6) woven fabrics powder-coated with PA6 microparticles. Initially, the PA6 microparticles (MP) were… read more here.
Keywords: parametric study; finite element; study; single polymer ... See more keywords