Articles with "performance doped" as a keyword



Photo from wikipedia

Investigation on microstructure and improved supercapacitive performance of Mn doped CuO thin films prepared by reactive radio frequency magnetron sputtering

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Materials Science: Materials in Electronics"

DOI: 10.1007/s10854-017-8118-5

Abstract: A reactive radio frequency magnetron sputtering technique was adopted to synthesize un-doped copper oxide and manganese doped copper oxide thin films. XRD analysis confirmed the formation of monoclinic phase of CuO with average crystallite size… read more here.

Keywords: reactive radio; cuo; thin films; performance doped ... See more keywords
Photo from wikipedia

Improved performance of Zn-doped SnO2 modified g-C3N4 for visible light-driven photocatalysis

Sign Up to like & get
recommendations!
Published in 2022 at "Environmental Science and Pollution Research"

DOI: 10.1007/s11356-022-19581-5

Abstract: The low-cost composite of g-C3N4 modified by Zn-doped SnO2 nanoparticles was prepared for the first time in this work. The characterization results of XRD and SEM demonstrated that Zn was successfully doped into SnO2. The… read more here.

Keywords: improved performance; doped sno2; light driven; performance doped ... See more keywords
Photo from archive.org

Thermoelectric performance of Cu-doped MoS2 layered nanosheets for low grade waste heat recovery

Sign Up to like & get
recommendations!
Published in 2020 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2019.144066

Abstract: Abstract Transition Metal Dichalcogenides (TMDCs) are the potential thermoelectric materials due to their high thermal stability as well as tunable electronic and phonon transport properties. In this work, we investigate theeffect of copper doping in… read more here.

Keywords: mos2 layered; layered nanosheets; doped mos2; performance doped ... See more keywords
Photo by jordanmcdonald from unsplash

Enhanced thermoelectric performance of In and Se co-doped GeTe compounds

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of materials research and technology"

DOI: 10.1016/j.jmrt.2020.02.037

Abstract: Abstract GeTe-based alloys have been considered promising p-type thermoelectric materials at medium temperatures (300−800 K). Indium (In), an effective dopant that introduces resonant states, and selenium (Se), which reduces lattice thermal conductivity, were combined. The process… read more here.

Keywords: enhanced thermoelectric; gete compounds; performance doped; thermoelectric performance ... See more keywords
Photo from wikipedia

Catalytic performance of N-doped activated carbon supported cobalt catalyst for carbon dioxide reforming of methane to synthesis gas

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of the Taiwan Institute of Chemical Engineers"

DOI: 10.1016/j.jtice.2018.07.016

Abstract: Abstract Activated carbon (AC) was treated with melamine to prepare nitrogen-doped carbon materials (AC-N), which used as support to prepare Co supported catalysts for CH4–CO2 reforming (DRM) reaction and its catalytic performance was investigated. The… read more here.

Keywords: carbon; activated carbon; performance doped; catalyst ... See more keywords
Photo from archive.org

Enhanced photoelectrochemical performance of Al-doped ZnO thin films prepared by co-spray technique

Sign Up to like & get
recommendations!
Published in 2020 at "Materials Science in Semiconductor Processing"

DOI: 10.1016/j.mssp.2020.105208

Abstract: Abstract Aluminium doped zinc oxide (AZO) films were achieved using co-spray method. Different techniques including UV–Visible (UV–Vis), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), Fourier transform infrared (FTIR) and photoelectrochemical (PEC) were used to characterize… read more here.

Keywords: photoelectrochemical performance; zno; zno thin; performance doped ... See more keywords
Photo from wikipedia

High performance In, Ta and Y-doped BaCeO3 electrolyte membrane for proton-conducting solid oxide fuel cells

Sign Up to like & get
recommendations!
Published in 2018 at "Solid State Ionics"

DOI: 10.1016/j.ssi.2018.04.021

Abstract: Abstract A novel BaCe0.7In0.15Ta0.05Y0.1O3-δ (BCITY) electrolyte membrane was fabricated on a NiO-BCITY (mass ratio: 6:4) composite anode by combing solid state reaction and Pechini method. The BCITY membrane exhibits high sintering activity, conductivity and apparently… read more here.

Keywords: electrolyte membrane; bcity; electrolyte; performance doped ... See more keywords
Photo by ricbro from unsplash

Performance of Mn-Ce co-doped siderite catalysts in the selective catalytic reduction of NO by NH3

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Fuel Chemistry and Technology"

DOI: 10.1016/s1872-5813(19)30061-1

Abstract: Abstract Siderite, rich in the transition elements, is an idea material to prepare the catalysts for the selective catalytic reduction (SCR) of NOx by NH3. In this work, siderite was doped with Mn and Ce… read more here.

Keywords: catalytic reduction; catalysts selective; selective catalytic; doped siderite ... See more keywords
Photo from wikipedia

High Performance of Pb-doped Li4Ti5O12 as an Anode Material for Lithium Ion Batteries

Sign Up to like & get
recommendations!
Published in 2017 at "International Journal of Electrochemical Science"

DOI: 10.20964/2017.09.40

Abstract: For the first time, Pb-doped Li4Ti5O12 (Pb-LTO) was prepared by a solution-drying-calcination (SDC) method in which lead acetate was employed as a dopant. In the present work, the effect of Pb to Ti atomic ratio… read more here.

Keywords: atomic ratio; li4ti5o12 anode; doped li4ti5o12; performance ... See more keywords
Photo from wikipedia

The Effect of Support on Catalytic Performance of Ni-Doped Mo Carbide Catalysts in 2-Methylfuran Production

Sign Up to like & get
recommendations!
Published in 2023 at "Catalysts"

DOI: 10.3390/catal13050870

Abstract: Ni-doped Mo carbide with Ni/Mo atomic ratio of 0.1 was supported on SiO2, Al2O3, and a porous carbon material (C), using a combination of gel combustion and impregnation methods. XRD, XPS, XANES, and EXAFS analyses… read more here.

Keywords: performance doped; support catalytic; catalytic performance; production ... See more keywords