Fully degradable PLA-based composite reinforced with 2D-braided Mg wires for orthopedic implants
Sign Up to like & getrecommendations! Published in 2017 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2017.02.013
Abstract: Abstract Fully degradable poly-lactic acid (PLA) is reinforced with 2D-braided magnesium alloy wires (Mg wires or MAWs) for bone fixation devices. The relationship between the mechanical/degradation properties of the composite and microstructural features such as… read more here.
Keywords: based composite; properties composite; pla based; reinforced braided ... See more keywords
Quality by Design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery.
Sign Up to like & getrecommendations! Published in 2020 at "International journal of pharmaceutics"
DOI: 10.1016/j.ijpharm.2020.119441
Abstract: Adopting the Quality by Design (QbD) approach in the drug development process has transformed from 'nice-to-do' into a crucial and required part of the development, ensuring the quality of pharmaceutical products throughout their whole life… read more here.
Keywords: development; pla based; plga pla; long acting ... See more keywords
Correlation between the composition of PLA-based folate targeted micelles and release of phosphonate derivative of betulin
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Drug Delivery Science and Technology"
DOI: 10.1016/j.jddst.2021.102717
Abstract: Abstract There are increasing numbers of developed nanocarriers for anticancer drug delivery in the aim to avoid side effects of the conventional chemotherapy. Filomicelles with folic acid (FA) as a targeting moiety are a novel… read more here.
Keywords: folic acid; pla based; drug; pla ... See more keywords
Simulation of mechanical behavior and optimization of simulated injection molding process for PLA based antibacterial composite and nanocomposite bone screws using central composite design.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2016.08.008
Abstract: In this study, injection molding of three poly lactic acid (PLA) based bone screws was simulated and optimized through minimizing the shrinkage and warpage of the bone screws. The optimization was carried out by investigating… read more here.
Keywords: bone screws; pla based; injection molding; bone ... See more keywords
Biodegradable MOFilters for Effective Air Filtration and Sterilization by Coupling MOF Functionalization and Mechanical Polarization of Fibrous Poly(lactic acid).
Sign Up to like & getrecommendations! Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c03932
Abstract: High-performance air filtration materials are important for addressing the airborne pollutants. Herein, we propose an unprecedented access to biodegradable poly(lactic acid) (PLA)-based MOFilters with excellent filtering performance and antibacterial activity. The fabrication involved a stepwise… read more here.
Keywords: pla based; air; poly lactic; lactic acid ... See more keywords
Super tough poly(lactic acid) blends: a comprehensive review
Sign Up to like & getrecommendations! Published in 2020 at "RSC Advances"
DOI: 10.1039/d0ra01801e
Abstract: Poly(lactic acid) or poly(lactide) (PLA) is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications. However, PLA is… read more here.
Keywords: poly lactic; pla; based blends; super tough ... See more keywords
Polyester-based polyurethanes derived from alcoholysis of polylactide as toughening agents for blends with shape-memory properties
Sign Up to like & getrecommendations! Published in 2022 at "RSC Advances"
DOI: 10.1039/d2ra07132k
Abstract: A process for sizing down and functionalizing commercial polylactide (PLA) resin is developed by alcoholysis with 1,4-butanediol (BDO) and propylene glycol (PG) to medium-sized PLA-based diols, with lower cost than a bottom-up synthesis process. These… read more here.
Keywords: pla; toughening agents; pla based; alcoholysis ... See more keywords
Structures and Antibacterial Properties of PLA-based Ciprofloxacin Composite Films Deposited by Low-Electron Beam Dispersion
Sign Up to like & getrecommendations! Published in 2020 at "Eurasian Chemico-Technological Journal"
DOI: 10.18321/ectj928
Abstract: Polylactic acid (PLA)-based ciprofloxacin (Cip) antibacterial films with mass ratio PLA:Cip=1:1 were prepared by low-electron beam dispersion (EBD). The molecular structure, chemical composition and morphology of PLA-based ciprofloxacin antibacterial films were investigated by XPS, FTIR,… read more here.
Keywords: pla based; ciprofloxacin; based ciprofloxacin; electron beam ... See more keywords
Tribological and Dynamical Mechanical Behavior of Prototyped PLA-Based Polymers
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13163615
Abstract: It is essential to combine current state-of-the-art technologies such as additive manufacturing with current ecological needs. Due to the increasing demand for non-toxic biodegradable materials and products, human society has been searching for new materials.… read more here.
Keywords: biodegradable materials; analysis; pla based; dynamical mechanical ... See more keywords
Modeling of the Electrotransport Process in PP-Based and PLA-Based Composite Fibers Filled with Carbon Nanofibers
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14122362
Abstract: Polypropylene and polylactide-based composite fibers have been produced by a melt technology. Long vapor-grown carbon fibers (CNFs) have been used as electrical conductivity fillers. It is clearly shown by experimental methods that the CNFs are… read more here.
Keywords: carbon; composite fibers; based composite; pla based ... See more keywords
Additive Manufacturing and Mechanical Characterization of PLA-Based Skull Surrogates
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym15010058
Abstract: Several occupational and leisure activities involve a high risk of head impacts, resulting in varying degrees of injuries with chronic consequences that adversely affect life quality. The design and manufacturing of effective head protections rely… read more here.
Keywords: manufacturing mechanical; head; pla based; mechanical characterization ... See more keywords