Preparation and mechanical characterization of chicken feather/PLA composites
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Composites"
DOI: 10.1002/pc.23644
Abstract: Green composites, a bio-based polymer matrix is reinforced by natural fibers, are special class of bio-composites. Interest about green composites is continuously growing because they are environment-friendly. This study describes the preparation and mechanical characterization… read more here.
Keywords: chicken feather; pla; preparation mechanical; pla composites ... See more keywords
Mechanical and thermal properties of rice Straw/PLA modified by nano Attapulgite/PLA interfacial layer
Sign Up to like & getrecommendations! Published in 2019 at "Composites Communications"
DOI: 10.1016/j.coco.2019.02.001
Abstract: Abstract A series of attapulgite (ATP) solutions were used for the modification of rice straw (RS) to improve its compatibility with polylactic acid (PLA) matrix through attaching ATP nanorods on the surface of the RS.… read more here.
Keywords: rice straw; pla; thermal properties; mrs pla ... See more keywords
Improved fracture toughness and ductility of PLA composites by incorporating a small amount of surface-modified helical carbon nanotubes
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.10.060
Abstract: Abstract To overcome the brittleness of poly (lactic acid) (PLA), worm-like helical carbon nanotubes (HCNTs) were selected as a novel additive to PLA in this work due to their unique morphology. To enhance the interfacial… read more here.
Keywords: ductility; small amount; carbon nanotubes; pla ... See more keywords
Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)
Sign Up to like & getrecommendations! Published in 2020 at "Polymer Degradation and Stability"
DOI: 10.1016/j.polymdegradstab.2020.109214
Abstract: Abstract This paper investigates the effect of short jute fibers on the hydrolysis of poly (lactic acid) (PLA) in deionized water at 50 and 60 °C. The water absorption, thermal and mechanical properties (tensile and flexural),… read more here.
Keywords: short jute; jute fibers; jute; pla composites ... See more keywords
Enhanced cold crystallization and dielectric polarization of PLA composites induced by P[MPEGMA-IL] and graphene
Sign Up to like & getrecommendations! Published in 2017 at "Thermochimica Acta"
DOI: 10.1016/j.tca.2017.10.005
Abstract: Abstract To investigate the effect of modified graphene (Gra) by poly(methoxy poly(ethylene glycol) monomethacrylate-co-1-vinyl-3-ethylimidazolium bromide) (P[MPEGMA-IL]) on crystallization and dielectric behavior for poly(lactic acid) (PLA), the neat PLA and its composites were fabricated via solution… read more here.
Keywords: mpegma; pla; polarization; pla composites ... See more keywords
Study of Compatibility and Flame Retardancy of TPU/PLA Composites
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15062339
Abstract: In order to apply the rigid biodegradable PLA material for flexible toothbrush bristle products, in this paper, Poly(lactic acid) (PLA) and thermoplastic polyurethane elastomer (TPU) blends (TPU/PLA composites), with a mass ratio of 80:20, were… read more here.
Keywords: pla; flame; tpu pla; tpu ... See more keywords
Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications
Sign Up to like & getrecommendations! Published in 2019 at "Pharmaceutics"
DOI: 10.3390/pharmaceutics11040165
Abstract: Lignin (LIG) is a natural biopolymer with well-known antioxidant capabilities. Accordingly, in the present work, a method to combine LIG with poly(lactic acid) (PLA) for fused filament fabrication applications (FFF) is proposed. For this purpose,… read more here.
Keywords: lignin; healthcare applications; pla composites; antioxidant pla ... See more keywords
Facile Synthesis of Phosphorus and Cobalt Co-Doped Graphitic Carbon Nitride for Fire and Smoke Suppressions of Polylactide Composite
Sign Up to like & getrecommendations! Published in 2020 at "Polymers"
DOI: 10.3390/polym12051106
Abstract: Due to the unique two-dimensional structure and features of graphitic carbon nitride (g-C3N4), such as high thermal stability and superior catalytic property, it is considered to be a promising flame retardant nano-additive for polymers. Here,… read more here.
Keywords: carbon; pla composites; doped graphitic; graphitic carbon ... See more keywords
PLA Composites Reinforced with Flax and Jute Fibers—A Review of Recent Trends, Processing Parameters and Mechanical Properties
Sign Up to like & getrecommendations! Published in 2020 at "Polymers"
DOI: 10.3390/polym12102373
Abstract: Multiple environmental concerns such as garbage generation, accumulation in disposal systems and recyclability are powerful drivers for the use of many biodegradable materials. Due to the new uses and requests of plastic users, the consumption… read more here.
Keywords: composites reinforced; reinforced flax; jute fibers; pla composites ... See more keywords
Evaluation on Structural Properties and Performances of Graphene Oxide Incorporated into Chitosan/Poly-Lactic Acid Composites: CS/PLA versus CS/PLA-GO
Sign Up to like & getrecommendations! Published in 2021 at "Polymers"
DOI: 10.3390/polym13111839
Abstract: In this work, to fabricate a novel composite consisting of chitosan/poly-lactic acid doped with graphene oxide (CS/PLA-GO), composites were prepared via solution blending method to create various compositions of CS and PLA (90/10, 70/30 and… read more here.
Keywords: graphene oxide; poly lactic; pla; chitosan poly ... See more keywords
Rheological Behavior and Dynamic Mechanical Properties for Interpretation of Layer Adhesion in FDM 3D Printing
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14132721
Abstract: Commercial filaments of poly(lactic acid) (PLA) composites with particulate filler, carbon fiber, and copper powder with different contents were fabricated by FDM 3D printing in XZ-direction at bed temperatures of 45 °C and 60 °C.… read more here.
Keywords: adhesion; layer adhesion; dynamic mechanical; fdm printing ... See more keywords