Onion-like carbon-modified TiO2 coating by suspension plasma spray with enhanced photocatalytic performances
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Nanoparticle Research"
DOI: 10.1007/s11051-019-4633-z
Abstract: Onion-like carbon (OLC), a novel carbonaceous nanomaterial, has already attracted widespread concern due to its exceptional physicochemical properties. In this work, OLC nanoparticles (5–10 nm in diameter) were used as additives to fabricate nanotitania (TiO2)… read more here.
Keywords: tio2 coating; plasma spray; like carbon; onion like ... See more keywords
Supersonic Plasma Spray Deposition of CoNiCrAlY Coatings on Ti-6Al-4V Alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0563-4
Abstract: Plasma spray is a versatile technology used for production of environmental and thermal barrier coatings, mainly in the aerospace, gas turbine, and automotive industries, with potential application in the renewable energy industry. New plasma spray… read more here.
Keywords: conicraly coatings; spray; plasma spray; supersonic plasma ... See more keywords
Yttrium Aluminum Garnet Powder Feedstock for Atmospheric Plasma Spray
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01029-2
Abstract: High demands for higher turbine efficiency bring attention to newer and more advanced insulating materials for the high temperature components in the turbine. Yttrium aluminum garnet (YAG) has shown good insulating properties in the previous… read more here.
Keywords: spray; plasma spray; yttrium aluminum; powder ... See more keywords
Mechanical and corrosion performance of multilayer ceramic coatings deposited on an austenitic stainless steel using plasma spray
Sign Up to like & getrecommendations! Published in 2019 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-019-1827-z
Abstract: This research investigated consecutive multilayer thermal barrier coatings, including $$\hbox {Ni}_{3}\hbox {Al}$$Ni3Al–$$\hbox {Al}_{2}\hbox {O}_{3}$$Al2O3–$$\hbox {Al}_{2}\hbox {O}_{3}/\hbox {MgO}$$Al2O3/MgO, produced by plasma spray with outer layer thicknesses of 50, 100 and $$150\,\upmu \hbox {m}$$150μm deposited on an… read more here.
Keywords: plasma spray; hbox hbox; stainless steel; corrosion ... See more keywords
Understanding the microstructural evolution of high entropy alloy coatings manufactured by atmospheric plasma spray processing
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.144117
Abstract: Abstract Atmospheric plasma spray (APS) of mechanically alloyed equiatomic AlCoCrFeNi high entropy alloy (HEA) results in a complex alloy-oxide coating. All the constituent phases have been identified via extensive microscopy and spectroscopy at various length… read more here.
Keywords: alloy; spray; plasma; plasma spray ... See more keywords
Cold spray deposition of Inconel 718 in comparison with atmospheric plasma spray deposition
Sign Up to like & getrecommendations! Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.147704
Abstract: Abstract Inconel 718 is a Ni-based superalloy which has been widely used in aerospace industry. Repairing of Inconel 718 components has been usually carried out using atmospheric plasma spray (APS) and high velocity oxy fuel… read more here.
Keywords: inconel 718; spray; plasma spray; spray deposition ... See more keywords
Oxidation behaviors and mechanisms of Yb2O3-doped silicon coatings fabricated by vacuum plasma spray
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.04.005
Abstract: Abstract Environmental barrier coatings (EBCs) have been widely studied for the protection of ceramic matrix composites (CMCs). The phase transition of silica thermal growth oxide (TGO) has been proved to be an important factor for… read more here.
Keywords: mechanisms yb2o3; fabricated vacuum; oxidation; oxidation behaviors ... See more keywords
Plasma-spray derived, corrosion-resistive electrolyte for liquid antimony anode direct carbon fuel cell
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2018.09.036
Abstract: Abstract Direct carbon fuel cells (DCFC) that employ solid oxide electrolytes and liquid antimony (Sb) anodes are efficient electrochemical cells for converting various types of solid carbon fuels directly into power. Though the liquid Sb… read more here.
Keywords: plasma spray; antimony anode; corrosion; anode ... See more keywords
Microstructure and surface mechanical properties of plasma spray deposited and post spray heat treated hydroxyapatite (HA) based composite coating on titanium alloy (Ti-6Al-4V) substrate
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.06.011
Abstract: Abstract The present study concerns a detailed microstructural characterization and evaluation of surface mechanical properties of the plasma spray deposited hydroxyapatite (HA) based (HA + 50 wt% TiO 2 and HA + 10 wt% ZrO 2 ) composite coatings on Ti-6Al-4V… read more here.
Keywords: heat treatment; spray; spray deposited; plasma spray ... See more keywords
A novel method for in-situ synthesized TiN coatings by plasma spray-physical vapor deposition
Sign Up to like & getrecommendations! Published in 2018 at "Materials Letters"
DOI: 10.1016/j.matlet.2018.01.068
Abstract: Abstract As a novel process, the plasma spray-physical vapor deposition technology was used to in-situ synthesize the TiN coatings on the Ti-6Al-4V alloy. Due to its high power input and very low pressure, relatively pure… read more here.
Keywords: physical vapor; plasma spray; vapor deposition; spray physical ... See more keywords
Thick tungsten layer coating on ferritic-martensitic steel without interlayer using a DC vacuum plasma spray and a RF low pressure plasma spray method
Sign Up to like & getrecommendations! Published in 2017 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2016.12.049
Abstract: Abstract Tungsten has been attracted as one of promising candidates for plasma-facing materials in a next fusion reactor because of its many advantages. However, since the tungsten is difficult to machine and requires high cost… read more here.
Keywords: ferritic martensitic; spray; plasma spray; thick tungsten ... See more keywords