Erratum to: Temperature Measurement Challenges and Limitations for In-Flight Particles in Suspension Plasma Spraying
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0552-7
Abstract: Suspension plasma spraying (SPS) acquires a significant interest from the industry. The deposited coatings using this technique were proved to have unique microstructural features compared to those built by conventional plasma spraying techniques. In order… read more here.
Keywords: temperature; flight particles; temperature measurement; flight ... See more keywords
Liquid Feedstock Plasma Spraying: An Emerging Process for Advanced Thermal Barrier Coatings
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0555-4
Abstract: Liquid feedstock plasma spraying (LFPS) involves deposition of ultrafine droplets of suspensions or solution precursors (typically ranging from nano- to submicron size) and permits production of coatings with unique microstructures that are promising for advanced… read more here.
Keywords: plasma; feedstock plasma; liquid feedstock; advanced thermal ... See more keywords
Influence of Atmospheric Plasma Spraying Parameters on Porosity Formation in Coatings Manufactured from 45S5 Bioglass® powder
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00952-3
Abstract: Atmospheric plasma spraying parameters were studied to understand their influence on the splat stacking and the porosity formation in coatings made from commercial Schott 45S5 Bioglass® powder onto AISI 304 L stainless steel substrate. The spraying parameters were established… read more here.
Keywords: porosity; plasma; 45s5 bioglass; spraying parameters ... See more keywords
Fluffy Polyfluoroalkoxy Layer Produced by Air Plasma Spraying Based on “Grapeshot” Effect
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00965-y
Abstract: Fluoropolymers with low surface energies are widely used in friction reduction, anti-corrosion, and anti-ice coatings. The fabrication of hierarchical micro- and nanostructures with fluoropolymers is beneficial for industrial application. In this study, a superhydrophobic composite… read more here.
Keywords: fluffy polyfluoroalkoxy; layer; plasma spraying; air plasma ... See more keywords
Residual Stress Evolution in Zirconia (Y8%) Coatings During Atmospheric Plasma Spraying for Substrates Under Rotating Kinematic
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-020-01070-1
Abstract: Ceramics coatings produced by atmospheric plasma spraying (APS) on steel alloys parts involve high residual stress level that can affect the coating properties and integrity. Most of the experimental studies were focused on the stress… read more here.
Keywords: plasma spraying; residual stress; stress; stress evolution ... See more keywords
Printed Electronics by Plasma Spraying: Case Study for High Temperature Sensors
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-024-01773-9
Abstract: Temperature sensors are critical components in many industrial and research applications, particularly in harsh environments where high temperatures, corrosion and mechanical stress are prevalent. In this paper, we investigate the use of plasma spray technique… read more here.
Keywords: temperature; printed electronics; plasma spraying; electronics plasma ... See more keywords
Analysis of the t′ + c Phase Content from ZrO2-16 Mol.% Y2O3-16 Mol.% Ta2O5 Mechanoactivated Powder Mixtures in Coatings Deposited by Suspension Plasma Spraying
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-025-01946-0
Abstract: Gas turbines or power generation engines used in transportation, defense, and energy sectors use thermal barrier coatings (TBCs) to protect metallic components exposed to high-temperature conditions. This work focuses on the in situ synthesis during… read more here.
Keywords: zro2; plasma spraying; suspension plasma; mol ... See more keywords
Microstructure and properties of in-situ TiB 2 matrix composite coatings prepared by plasma spraying
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.04.107
Abstract: Abstract TiB 2 -TiC and Ti-B 4 C composite powders were plasma sprayed onto the 45 steel substrates, respectively, for preparing TiB 2 matrix composite coatings. The microstructure and properties of as-prepared coatings were investigated… read more here.
Keywords: prepared plasma; matrix composite; microstructure; tib tic ... See more keywords
Microstructure and properties of in-situ Ti5Si3-TiC composite coatings by reactive plasma spraying
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.145264
Abstract: Abstract Ti powders, Si powders, and sucrose as a carbonaceous precursor were used to prepare Ti-Si-C composite powders by a spray-drying/precursor-pyrolysis technology. Ti-Si-C composite coatings were in-situ synthesized by reactive plasma spraying of Ti-Si-C composite… read more here.
Keywords: ti5si3 tic; composite coatings; reactive plasma; microstructure properties ... See more keywords
A promising non-transformable tetragonal YSZ nanostructured feedstocks for plasma spraying-physical vapor deposition
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.10.012
Abstract: Abstract The nanostructured 8 wt% yttria stabilized zirconia (n-8YSZ) feedstocks used for plasma spraying-physical vapor deposition (PS-PVD) were successfully prepared by the powder reconstitution method for the first time in this study. The n-8YSZ feedstocks were… read more here.
Keywords: 8ysz feedstocks; physical vapor; spraying physical; vapor deposition ... See more keywords
In-situ oxide-free titanium nitride coating by conventional plasma spraying with improved properties
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.03.063
Abstract: Abstract We report in situ fabrication of oxide-free titanium nitride (TiN) coating by conventional plasma spraying technique. Complete oxide free TiN coating without using low pressure or vacuum environment was achieved by using the N2… read more here.
Keywords: plasma spraying; free titanium; oxide free; titanium nitride ... See more keywords