Properties of particleboard produced from post-industrial UF- and PF-bonded plywood
Sign Up to like & getrecommendations! Published in 2017 at "European Journal of Wood and Wood Products"
DOI: 10.1007/s00107-017-1266-8
Abstract: An approach based on the recycling of waste plywood as a recovered wood resource for the particleboard industry is described. It is demonstrated that post-industrial urea- (UF) and phenol-formaldehyde (PF) bonded plywood can be effectively… read more here.
Keywords: post industrial; particleboard produced; properties particleboard; bonded plywood ... See more keywords
Formaldehyde emission behavior of plywood with phenol-formaldehyde resin modified by bio-oil under radiant floor heating condition
Sign Up to like & getrecommendations! Published in 2018 at "Building and Environment"
DOI: 10.1016/j.buildenv.2018.08.025
Abstract: Abstract Bio-oil was added as a substitute of phenol for phenol-formaldehyde (PF) resin to reduce the cost and formaldehyde emission (FE) in radiant floor heating system. The effects of substitute rate of bio-oil to phenol,… read more here.
Keywords: resin; phenol; formaldehyde; bio oil ... See more keywords
Flexural properties evaluation of carbon-fiber fabric reinforced poplar/eucalyptus composite plywood formwork
Sign Up to like & getrecommendations! Published in 2019 at "Composite Structures"
DOI: 10.1016/j.compstruct.2019.111073
Abstract: Abstract To improve the product quality of traditional wooden building formwork, utilize the resources of wood and evaluate the failure mode of the formwork. Carbon-fiber fabric (CF fabric) reinforced poplar/eucalyptus composite plywood were prepared by… read more here.
Keywords: carbon fiber; eucalyptus composite; plywood; formwork ... See more keywords
Plywood made from plasma-treated veneers: Shear strength after shrinkage-swelling stress
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2017.07.003
Abstract: Abstract Thermally modified and unmodified beech veneers in untreated and plasma-treated state were immersed in melamine solution at different concentrations. The plasma pre-treated veneers exhibited significantly higher melamine loads than the untreated veneers at equal… read more here.
Keywords: plasma treated; made plasma; treated veneers; shear strength ... See more keywords
Assessment and application of phosphorus/calcium-cottonseed protein adhesive for plywood production
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2019.05.038
Abstract: Abstract Cottonseed protein is a potential alternative to formaldehyde-based adhesives as a renewable resource without negative environmental impact in use. Like other protein-based adhesives, unmodified cottonseed protein isolate needs improved water resistance. Thus, in this… read more here.
Keywords: cottonseed protein; production; plywood; calcium ... See more keywords
A high-performance soybean meal-based plywood adhesive prepared via an ultrasonic process and using significantly lower amounts of chemical additives
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.123017
Abstract: Abstract The development of a formaldehyde-free, high-performance soybean meal (SM)-based adhesive for manufacturing cleaner wood-based panels is important for minimizing environmental pollution and promoting sustainability. However, the addition of chemical agents for this purpose negatively… read more here.
Keywords: performance soybean; process; performance; plywood ... See more keywords
Structural behaviour and design of plywood sheathed cold-formed steel wall systems subjected to out of plane loading
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Constructional Steel Research"
DOI: 10.1016/j.jcsr.2019.105888
Abstract: Abstract An experimental study was conducted to explore the strength contribution of plywood sheathing boards that are regularly used in the cold-formed steel (CFS) wall panel construction. A series of material tests and 4-point bending… read more here.
Keywords: wall; formed steel; plywood; cold formed ... See more keywords
Impact of the change in raw material supply on enterprise strategies of the Japanese plywood industry
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Forest Research"
DOI: 10.1080/13416979.2018.1534048
Abstract: ABSTRACT The Japanese plywood industry has been profoundly affected by external factors such as raw material supply from overseas, and has increased the utilization rate of domestic timber in recent years. To analyze an industry… read more here.
Keywords: raw material; industry; japanese plywood; plywood industry ... See more keywords
Wood plastic composites (WPC) based on high-density polyethylene and birch wood plywood production residues
Sign Up to like & getrecommendations! Published in 2018 at "International Wood Products Journal"
DOI: 10.1080/20426445.2017.1410997
Abstract: ABSTRACT Much research is being devoted to green bio-composites production and properties. The most popular materials in this field are wood plastic composites (WPC) based on polyolefins and different wood fibres. Our studies are focussed… read more here.
Keywords: composites wpc; production; plastic composites; wood plastic ... See more keywords
Utilization of enzymatic hydrolysate from corn stover as a precursor to synthesize an eco-friendly adhesive for plywood II: investigation of appropriate manufacturing conditions, curing behavior, and adhesion mechanism
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Wood Science"
DOI: 10.1186/s10086-020-01933-9
Abstract: In this study, further research on an enzymatic hydrolysate-ammonium dihydrogen phosphate (EHADP) adhesive was carried out. Appropriate hot pressing conditions were clarified by measuring the bond strength of three-ply plywood bonded with EHADP adhesive, and… read more here.
Keywords: plywood; ehadp adhesive; adhesion mechanism; enzymatic hydrolysate ... See more keywords
Addition of Polyurethane Foam Waste to Polymeric Diphenyl Methane Diisocyanate to Improve Plywood Binder Performance
Sign Up to like & getrecommendations! Published in 2020 at "Forest Products Journal"
DOI: 10.13073/fpj-d-19-00062
Abstract: Abstract The objective of this study was to investigate the feasibility of using polyurethane (PU) foam waste obtained from automobile shredder residue (ASR) in plywood production. The PU foam wast... read more here.
Keywords: polyurethane foam; plywood; foam; foam waste ... See more keywords