Numerical characterization of residual stresses in a four-point-bending experiment of textured duplex stainless steel
Sign Up to like & getrecommendations! Published in 2021 at "Archive of Applied Mechanics"
DOI: 10.1007/s00419-021-01931-3
Abstract: The resulting shapes in production processes of metal components are strongly influenced by deformation induced residual stresses. Dual-phase steels are commonly used for industrial application of, e.g., forged or deep-drawn structural parts. This is due… read more here.
Keywords: steel; point bending; residual stresses; phase ... See more keywords
Analysis of acoustic emission characteristics of ice under three point bending
Sign Up to like & getrecommendations! Published in 2020 at "Cold Regions Science and Technology"
DOI: 10.1016/j.coldregions.2020.103063
Abstract: Abstract Acoustic emission (AE) is one of the promising techniques to understand the damage mechanism within a material and structural health monitoring non-invasively. The transient elastic energy released during the microscopic failure within a material… read more here.
Keywords: point bending; analysis; acoustic emission; three point ... See more keywords
Quasi-static three-point bending and fatigue behavior of 3-D orthogonal woven composites
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.09.077
Abstract: Abstract 3-D orthogonal woven composites (3DOWC) have attracted great attention in the industrial and civil fields, due to their excellent mechanical properties. However, due to the mutual perpendicular yarns in three directions, its mechanical properties… read more here.
Keywords: point bending; orthogonal woven; bending fatigue; three point ... See more keywords
Mechanical behavior of thick composite tubes under four-point bending
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112097
Abstract: Abstract This paper presents the behavior of thick thermoplastic composite tubes made by an automated fiber placement machine, and subjected to four-point bending load. The mechanical behavior includes flexural stiffness, and strains. Methods for the… read more here.
Keywords: composite tubes; behavior thick; mechanical behavior; four point ... See more keywords
A thick bondline beam model for the adhesively bonded 3-point bending specimen
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2019.102465
Abstract: Abstract The adhesively bonded 3-point bending specimen has been recently considered for evaluating the adhesive shear stress-strain behaviour. Its main advantage is avoiding the spurious end effects typical of lap-joints. A previous beam model proved… read more here.
Keywords: adhesively bonded; point bending; bending specimen; beam model ... See more keywords
Four-point-bending device for bending moment controlled cyclic reverse loading on plate materials and its application on AZ31B magnesium sheets
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2017.12.011
Abstract: Abstract Fatigue testing of materials under various loading conditions is an important basis for designing high performance structures. One common load state is bending that can be often found for thin walled components like sheet… read more here.
Keywords: bending device; bending moment; four point; point bending ... See more keywords
Fracture investigation of different welded steel beam-column connections under three-point bending test
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Constructional Steel Research"
DOI: 10.1016/j.jcsr.2021.106945
Abstract: Abstract Steel structures are frequently preferred in the construction sector due to their lightweight and durability. Their durability, especially under static and dynamic loads, enables structures to effectively protect against external factors such as earthquakes.… read more here.
Keywords: column; fracture; point bending; three point ... See more keywords
On dynamic behavior of bone: Experimental and numerical study of porcine ribs subjected to impact loads in dynamic three-point bending tests.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2019.05.031
Abstract: This study covers the characterization of the dynamic behavior of isolated porcine ribs based on experimental and numerical approaches. A Split Hopkinson Pressure Bar (SHPB) setup for three-point bending tests was used. Data of 20… read more here.
Keywords: dynamic behavior; point bending; three point; experimental numerical ... See more keywords
Application of fused deposition modeling technology for fabrication jigs of three-point bending test for dental composite resins.
Sign Up to like & getrecommendations! Published in 2022 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2022.105172
Abstract: This study aimed to clarify the application possibility of the fused deposition modeling (FDM) technology on the fabrication of jigs for a flexural test of dental composite resins (CRs). Three types of jigs were prepared… read more here.
Keywords: three point; technology; composite resins; test ... See more keywords
Three-point bending of an expanded-tapered sandwich beam—Analytical and numerical FEM study
Sign Up to like & getrecommendations! Published in 2020 at "Mechanics Research Communications"
DOI: 10.1016/j.mechrescom.2019.103471
Abstract: Abstract The paper is devoted to expanded-tapered sandwich beam under three-point bending. The analytical model of the beam based on the broken-line hypothesis (zig-zag theory) is developed. The maximum deflection of the beam with consideration… read more here.
Keywords: tapered sandwich; point bending; sandwich beam; three point ... See more keywords
Formation mechanism and three-point bending behaviour of directly fabricated aluminium foam plates
Sign Up to like & getrecommendations! Published in 2017 at "Materials Science and Technology"
DOI: 10.1080/02670836.2016.1221494
Abstract: New-style smooth-faced aluminium foam plates (AFPs) covered by dense skins have been fabricated directly. AFPs with porosity ranging from 79.3 to 85.2% and with an average diameter of 2.3 to 2.7 mm are obtained via the… read more here.
Keywords: foam plates; formation mechanism; mechanism; point bending ... See more keywords