Pollutant removal and microorganism evolution of activated sludge under ofloxacin selection pressure.
Sign Up to like & getrecommendations! Published in 2017 at "Bioresource technology"
DOI: 10.1016/j.biortech.2017.06.019
Abstract: An activated sludge sequencing batch reactor (SBR) was fed with synthetic wastewater containing ofloxacin (OFL) for 52days to study the overall performance of the SBR, the characteristics of extracellular polymeric substances (EPS) and the bacterial… read more here.
Keywords: pollutant removal; removal microorganism; activated sludge; sludge ... See more keywords
Simultaneously pollutant removal and S0 recovery from composite wastewater containing Cr(VI)-S2- based on biofilm enhancement.
Sign Up to like & getrecommendations! Published in 2022 at "Bioresource technology"
DOI: 10.1016/j.biortech.2022.127017
Abstract: Bioaugmentation of extracellular polymeric substances-producing bacteria was applied in pollutant removal and S0 recovery from composite wastewater in a mixotrophic denitrification system. In the presence of 200 mg·L-1 S2- and 50 mg·L-1 Cr(VI), the removal… read more here.
Keywords: removal recovery; wastewater; pollutant removal; recovery ... See more keywords
A review: Comparison of multi-air-pollutant removal by advanced oxidation processes – Industrial implementation for catalytic oxidation processes
Sign Up to like & getrecommendations! Published in 2021 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2020.128136
Abstract: Abstract Integrated pollutant removal technology has gradually become a research focus due to its simple layout and low operating cost. The research and development of this technology does not only benefit the operation of coal-fired… read more here.
Keywords: pollutant removal; oxidation; removal; air pollutant ... See more keywords
Greenhouse gas emissions and pollutant removal in treatment wetlands with ornamental plants under subtropical conditions
Sign Up to like & getrecommendations! Published in 2017 at "Ecological Engineering"
DOI: 10.1016/j.ecoleng.2017.06.001
Abstract: Abstract Methane (CH4) and nitrous oxide (N2O) emissions, and pollutant removal were investigated in constructed wetland (CW) mesocosms planted with the ornamental plant Zantedeschia aethiopica to treat polluted river water. We used two types of… read more here.
Keywords: pollutant removal; greenhouse gas; zantedeschia; zones planted ... See more keywords
Optimal influent COD/N ratio for obtaining low GHG emissions and high pollutant removal efficiency in constructed wetlands
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.122003
Abstract: Abstract Influent chemical oxygen demand (COD)/nitrogen (N) ratio plays a crucial role in the biogeochemical cycle of carbon and N in constructed wetlands (CWs). This study evaluated the greenhouse gas (GHG) emissions, pollutant removal efficiency… read more here.
Keywords: pollutant removal; influent cod; ghg emissions; removal efficiency ... See more keywords
TiO2/porous adsorbents: Recent advances and novel applications.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of hazardous materials"
DOI: 10.1016/j.jhazmat.2017.07.070
Abstract: This article reviews two interrelated areas of research: the first is the use of TiO2-supported adsorbent materials as enhanced heterogeneous photocatalysts and their application to various reactions for organic pollutant removal from air and water;… read more here.
Keywords: tio2; tio2 porous; pollutant removal; adsorbent materials ... See more keywords
Highly Biocompatible, Underwater Superhydrophilic and Multifunctional Biopolymer Membrane for Efficient Oil–Water Separation and Aqueous Pollutant Removal
Sign Up to like & getrecommendations! Published in 2018 at "ACS Sustainable Chemistry & Engineering"
DOI: 10.1021/acssuschemeng.7b04219
Abstract: Conventional wastewater treatment systems generally require multiple steps and complex procedures to remove aqueous pollutants and oil contaminants from polluted water. Herein, we fabricate an underwater superoleophobic membrane by cross-linking konjac glucomannan on pristine fabrics,… read more here.
Keywords: aqueous pollutant; oil water; pollutant removal; water separation ... See more keywords
Large-Eddy Simulation Analyses of Heated Urban Canyon Facades
Sign Up to like & getrecommendations! Published in 2021 at "Energies"
DOI: 10.3390/en14113078
Abstract: Thermal convective flows are common phenomena in real urban canyons and strongly affect the mechanisms of pollutant removal from the canyon. The present contribution aims at investigating the complex interaction between inertial and thermal forces… read more here.
Keywords: large eddy; simulation analyses; eddy simulation; pollutant removal ... See more keywords
Magnetic Metal Oxide-Based Photocatalysts with Integrated Silver for Water Treatment
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15134629
Abstract: In this review, the most recent advances in the field of magnetic composite photocatalysts with integrated plasmonic silver (Ag) is presented, with an overview of their synthesis techniques, properties and photocatalytic pollutant removal applications. Magnetic… read more here.
Keywords: water; photocatalysts integrated; pollutant removal; treatment ... See more keywords
GO/TiO2-Related Nanocomposites as Photocatalysts for Pollutant Removal in Wastewater Treatment
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12193536
Abstract: Water pollution has been a prevalent issue globally for some time. Some pollutants are released into the water system without treatment, making the water not suitable for consumption. This problem may lead to more grave… read more here.
Keywords: wastewater treatment; tio2 related; pollutant removal; tio2 ... See more keywords
Fabrication of Electrospun Cellulose Acetate/Nanoclay Composites for Pollutant Removal
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14235070
Abstract: The creation of eco-friendly clay-based composites for pollutant removal by adsorption still remains a challenge. This problem might be successfully solved by the development of electrospun polymer–clay composites. For the first time in this study,… read more here.
Keywords: cellulose acetate; composites pollutant; pollutant removal; fabrication electrospun ... See more keywords