Strong and Thermally Conductive Poly(p‐Phenylene Benzobisoxazole) Nanofiber Films via a Hierarchical Assembly Strategy
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202520689
Abstract: Poly (p‐phenylene benzobisoxazole) (PBO) nanofiber films are promising candidates for next‐generation electronics due to their superior thermal stability, mechanical strength, and heat dissipation capability. However, fabricating high‐quality PBO nanofiber film remains challenging due to its… read more here.
Keywords: phenylene benzobisoxazole; nanofiber films; poly phenylene; pbo nanofiber ... See more keywords
Effect of End‐Group Ionization on Melt Stability of Poly(Phenylene Sulfide)
Sign Up to like & getrecommendations! Published in 2025 at "Macromolecular Chemistry and Physics"
DOI: 10.1002/macp.202500247
Abstract: Poly(phenylene sulfide) (PPS) produced by the sodium sulfide method contains ionized end groups such as sodium mercaptide (‐SNa) and sodium 4‐(methylamino)butanoate (‐SMAB), which can be exchanged to proton or other cations by ion‐exchange process. Depending… read more here.
Keywords: melt stability; end; poly phenylene; ionization ... See more keywords
Tailoring Dielectric Properties and Dimensional Stability of Poly(Phenylene Ether) Using Bismaleimide Crosslinkers for High-Frequency PCB Applications.
Sign Up to like & getrecommendations! Published in 2024 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202400777
Abstract: With the increasing demand for high-performance printed circuit boards (PCBs) in the 6G communication era, dielectric substrate materials must exhibit a low dielectric constant (Dk), low dielectric loss (Df), and high dimensional stability. In this… read more here.
Keywords: bmi; poly phenylene; phenylene ether; dimensional stability ... See more keywords
Polydopamine coated poly(m-phenylene isophthalamid) membrane as heat-tolerant separator for lithium-ion batteries
Sign Up to like & getrecommendations! Published in 2020 at "Ionics"
DOI: 10.1007/s11581-020-03699-y
Abstract: Poly(m-phenylene isophthalamide) (PMIA) membranes are promising heat-tolerant separator candidates of lithium-ion batteries (LIBs), while their wettability toward carbonate electrolyte and corresponding batteries performance are not desirable. Herein, PMIA membranes coated with ultrathin mussel-inspired polydopamine (PDA)… read more here.
Keywords: separator; pmia; pmia pda; poly phenylene ... See more keywords
Poly(phenylene sulfide)-graphite composites for bipolar plates with preferred morphological orientation
Sign Up to like & getrecommendations! Published in 2019 at "Korean Journal of Chemical Engineering"
DOI: 10.1007/s11814-019-0397-5
Abstract: Bipolar plates in phosphoric acid fuel cells require inertness to phosphoric acid as well as excellent electrical, thermal, and mechanical properties. For this application, we prepared poly(phenylene sulfide) (PPS)-graphite composites with random or ordered graphite… read more here.
Keywords: graphite; orientation; poly phenylene; graphite composites ... See more keywords
Electrical conductivity of carbon nanotube-filled miscible poly(phenylene oxide)/polystyrene blends prepared by melt compounding
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107213
Abstract: Abstract Conductive polymer composites (CPCs) have attracted tremendous attention from both academia and industry for several decades. Unfortunately, high conductive filler loadings required for current CPCs to obtain insulator/conductor transition (usually defined as percolation threshold)… read more here.
Keywords: miscible poly; electrical conductivity; phenylene oxide; poly phenylene ... See more keywords
Poly(phenylene-carborane) grafted graphene oxide for lightweight and thin–thickness microwave absorption composites
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.158708
Abstract: Abstract The poly(phenylene-carborane) (PPB) is covalently attached to the surface of graphene oxide (GO) for the first time via Ni(0)-catalyzed polymerization, and the functionalization of the GO has been confirmed by XPS, XRD, FT-IR, SEM,… read more here.
Keywords: carborane; phenylene carborane; ppb; thickness ... See more keywords
Tuning the optical properties of poly(p-phenylene ethynylene) nanoparticles as bio-imaging probes by side chain functionalization.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2017.05.072
Abstract: Conjugated polymers are versatile bio-imaging probes as their optical properties can be readily fine-tuned. In this manuscript, fluorescent conjugated polymer nanoparticles are fabricated using three different poly(p-phenylene ethynylene) (PPE) derivatives. The polymers have the same… read more here.
Keywords: bio imaging; imaging probes; optical properties; poly phenylene ... See more keywords
PEGylating poly(p-phenylene vinylene)-based bioimaging nanoprobes.
Sign Up to like & getrecommendations! Published in 2020 at "Journal of colloid and interface science"
DOI: 10.1016/j.jcis.2020.07.145
Abstract: HYPOTHESIS Conjugated polymer nanoparticles (CNPs) have attracted considerable attention within bioimaging due to their excellent optical properties and biocompatibility. However, unspecific adsorption of proteins hampers their effective use as advanced bioimaging probes. Controlled methodologies made… read more here.
Keywords: phenylene vinylene; optical properties; cnps; poly phenylene ... See more keywords
Dielectric relaxation of fullerene C60-containing nanocomposites based on poly(phenylene oxide)
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Non-crystalline Solids"
DOI: 10.1016/j.jnoncrysol.2018.01.008
Abstract: Abstract Molecular mobility of nanocomposites based on poly(phenylene oxide) (PPO) containing 1, 2, 4 and 8 wt% of C60 fullerenes was studied by dielectric spectroscopy. In all samples, two relaxation processes were present and caused by… read more here.
Keywords: based poly; mobility; poly phenylene; phenylene oxide ... See more keywords
Improved electrical power production of thermally regenerative batteries using a poly(phenylene oxide) based anion exchange membrane
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Power Sources"
DOI: 10.1016/j.jpowsour.2017.01.003
Abstract: Abstract Thermally regenerative ammonia-based batteries (TRABs) can be used to harvest low-grade waste heat as electrical power. To improve TRAB performance, a series of benzyltrimethyl quaternary ammonium-functionalized poly(phenylene oxide) anion exchange membranes (BTMA-AEMs) were examined… read more here.
Keywords: electrical power; poly phenylene; power; thermally regenerative ... See more keywords