Additive Manufacturing of Fiber‐Reinforced Polymer Matrix Composites through Material Extrusion: A Comprehensive Review on Filament Fabrication, Printing, Testing Methods, Applications, and Challenges
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500676
Abstract: Additive manufacturing, or 3D printing, has revolutionized the manufacturing industry by enabling the manufacturer to have precise control over material composition, complex geometry, and microstructure. While the 3D printing technology for polymer materials has been… read more here.
Keywords: matrix composites; additive manufacturing; polymer matrix; fiber ... See more keywords
Testing of Marine Fouling‐Inhibiting Enzymes in a Water‐Based Methacrylate Polymer Matrix
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.202400647
Abstract: Commonly used antifouling coatings rely on the continuous release of biocidal ingredients and are becoming increasingly restricted by legislation. The resulting demand for nonbiocidal technologies involves the search for alternative ingredients and in particular enzymes… read more here.
Keywords: polymer matrix; methacrylate polymer; polymer; water based ... See more keywords
Irradiation dose control for polymer‐matrix composites fabricated by in situ curing with low‐energy electron beam
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.44944
Abstract: The electron beam (EB) with emitting energies lower than 150 keV is applicable in in situ curing of polymer-matrix composites; however, being poor in penetration ability, it leads to significant attenuation of irradiation dose along… read more here.
Keywords: irradiation; electron beam; matrix composites; polymer matrix ... See more keywords
Piezoelectric fluorinated polymer composites: A review on coupling agents at the filler/matrix interface
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28064
Abstract: Among electroactive polymers, polyvinylidene fluorine (PVDF) and its copolymers present the highest piezoelectric response which makes them very attractive for applications combining flexibility and piezoelectricity. The use of composites with the incorporation of electroactive ceramics… read more here.
Keywords: piezoelectric fluorinated; fluorinated polymer; polymer matrix; polymer composites ... See more keywords
A semi‐empirical model of the influence of the size of micrometer fillers on the elastic properties of polymer‐matrix composites
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28454
Abstract: A semi‐empirical model of the influence of the size of micrometer fillers on the elastic moduli of polymer‐matrix composites is proposed. The modulus of elasticity of the composite is the sum of the modulus of… read more here.
Keywords: matrix composites; polymer matrix; size; filler size ... See more keywords
Modeling short fiber reinforced polymer matrix composite materials using material designer
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29625
Abstract: In the present era, the importance of simulations pertaining to production is increasing in terms of cost, human resources, and time. As the majority of existing studies on polymer matrix composites are experimental, the development… read more here.
Keywords: designer; material designer; fiber reinforced; polymer matrix ... See more keywords
Effect of Polymer Structure on Precursor Diffusion and Particle Formation in Polymer Matrix Nanocomposites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Inorganic and Organometallic Polymers and Materials"
DOI: 10.1007/s10904-018-0843-6
Abstract: Palladium nanoparticles were synthesized in a semi-crystalline poly[tetrafluoroethylene-co-(perfluoropropyl vinyl ether)] matrix using a chemical infusion technique where a chemical precursor is vaporized and diffused into the polymer matrix. Once in the matrix, the precursor is… read more here.
Keywords: precursor diffusion; polymer matrix; polymer;
Nondestructive Testing of Defects in Polymer–Matrix Composite Materials for Marine Applications Using Terahertz Waves
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Nondestructive Evaluation"
DOI: 10.1007/s10921-021-00767-9
Abstract: Fibreglass components employed in the marine environment are susceptible to moisture ingress, resulting in a degradation of mechanical properties. The nondestructive testing and evaluation of such materials using acoustic methods is possible under certain conditions,… read more here.
Keywords: water; terahertz; testing defects; nondestructive testing ... See more keywords
High-Efficiency Flexible and Foldable Paper-Based Supercapacitors Using Water-Dispersible Polyaniline-Poly(2-acrylamido-2-methyl-1-propanesulfonic acid) and Poly(vinyl alcohol) as Conducting Agent and Polymer Matrix
Sign Up to like & getrecommendations! Published in 2018 at "Macromolecular Research"
DOI: 10.1007/s13233-018-6062-8
Abstract: For the first time, common printing paper is converted to electrode for high-performance flexible and foldable electrochemical supercapacitor using water-dispersible conductive polymer, polyaniline-poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PANI-PAAMPSA) and poly(vinyl alcohol) (PVA) as conducting agent and polymer matrix,… read more here.
Keywords: paper based; paper; poly; polymer matrix ... See more keywords
Anisotropy of thermal conductivity in 3D printed polymer matrix composites for space based cube satellites
Sign Up to like & getrecommendations! Published in 2017 at "Additive manufacturing"
DOI: 10.1016/j.addma.2017.05.012
Abstract: Abstract Polymer extrusion three dimensional (3D) printing, such as fused deposition modeling (FDM), has recently garnered attention due to its inherent process flexibility and rapid prototyping capability. Specifically, the addition of electrical components and interconnects… read more here.
Keywords: conductivity printed; space; space based; thermal conductivity ... See more keywords
No effect of the hydrogen bonds on the physicochemical properties of the guest-host poly(amide imide) azosystems and efficiency of chromophore orientation
Sign Up to like & getrecommendations! Published in 2018 at "Dyes and Pigments"
DOI: 10.1016/j.dyepig.2018.04.017
Abstract: Abstract In this paper, we show a series of the new noncovalent azosystems based on poly(amide imide) matrices. Azobenzene derivatives were attached to the polymer matrix via hydrogen bonds or formed doped systems. Additionally, glass… read more here.
Keywords: chromophore; hydrogen bonds; polymer matrix; amide imide ... See more keywords