Preparation and characterization of polymethyl methacrylate light-scattering material
Sign Up to like & getrecommendations! Published in 2019 at "Polymer Bulletin"
DOI: 10.1007/s00289-019-02909-6
Abstract: In this paper, hydroxyl terminated polysiloxane was first prepared by ring-opening polymerization of octamethylcyclotetrasiloxane (D 4 ), which was then modified with acryloyl chloride to obtain acryloyloxy polysiloxane. A light-scattering material was synthesized by copolymerization… read more here.
Keywords: polymethyl methacrylate; scattering material; characterization polymethyl; preparation characterization ... See more keywords
Reactively sputtered half-metallic Fe3O4 thin films at room temperature on polymethyl methacrylate: A perspective for flexible spintronics
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.04.270
Abstract: Abstract For plastic spintronics, it has thus far been a challenge to develop a (magnetic nanostructures)/polymer heterostructure at low temperature due to the thermal sensitivity of polymers. In this context, half-metallic magnetite (Fe3O4) films of… read more here.
Keywords: flexible spintronics; half metallic; thin films; temperature ... See more keywords
Single and joint toxicity of polymethyl methacrylate microplastics and As (V) on rapeseed (Brassia campestris L.).
Sign Up to like & getrecommendations! Published in 2021 at "Chemosphere"
DOI: 10.1016/j.chemosphere.2021.133066
Abstract: Most microplastics and arsenic (As) have been released into farmland via industrial and agricultural activities, posing a potential threat to crop growth and food safety. Thus far, few studies have focused on the phytoxicity of… read more here.
Keywords: brassia campestris; campestris single; rapeseed brassia; polymethyl methacrylate ... See more keywords
Fabrication of polymethyl methacrylate composites with silanized boron nitride by in-situ polymerization for high thermal conductivity
Sign Up to like & getrecommendations! Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.01.021
Abstract: Abstract Heat management is considered to be a critical issue for the efficient integration of electronic devices, and the demand for materials with high thermal conductivity is increasing. Therefore, various thermally conductive fillers have been… read more here.
Keywords: high thermal; boron nitride; thermal conductivity; polymethyl methacrylate ... See more keywords
Conceiving a feasible degradation model of polylactic acid-based composites through hydrolysis study to polylactic acid/wood flour/polymethyl methacrylate
Sign Up to like & getrecommendations! Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.06.002
Abstract: Abstract On the road of wide popularization and application of polylactic acid (PLA), its degradation performance frequently fetters the advancing feet. The work attempted to develop a (PLA & Coating-layer) @Filler [(PLA&C)@F] model composite with… read more here.
Keywords: polymethyl methacrylate; wood flour; pla;
Preparation and properties of anti-infrared transparent thermal-insulating film based on polymethyl methacrylate
Sign Up to like & getrecommendations! Published in 2020 at "Energy"
DOI: 10.1016/j.energy.2019.116848
Abstract: Abstract A series of thermal-insulating films are prepared by adding the corresponding new thermal insulating materials to polymethyl methacrylate (PMMA) by dissolution-condensation method. On the basis, the microstructure of the thermal barrier film, the corresponding… read more here.
Keywords: insulating film; thermal insulating; polymethyl methacrylate; film ... See more keywords
Preparation and hydrogen storage property of Mg-based hydrogen storage composite embedded by polymethyl methacrylate
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2017.03.122
Abstract: Abstract A novel embedded Mg-based hydrogen storage nanocomposite was prepared by mechanical milling of hydriding combustion synthesized (HCS) Mg-based hydride and hydrogen permissive/oxygen prohibitive polymer. The Mg-based hydride was mechanically milled with tetrahydrofuran solution of… read more here.
Keywords: hydrogen storage; microscopy; hydrogen; polymethyl methacrylate ... See more keywords
Ordered-Porous-Array Polymethyl Methacrylate Films for Radiative Cooling.
Sign Up to like & getrecommendations! Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c06809
Abstract: Passive radiative cooling is a spontaneous pattern of reflecting sunlight and radiating heat into the cold outer space through transparent atmosphere windows. In this work, an ordered-porous-array polymethyl methacrylate (OPA-PMMA) film with the properties of… read more here.
Keywords: array polymethyl; porous array; ordered porous; radiative cooling ... See more keywords
A well-defined lignin-based filler for tuning the mechanical properties of polymethyl methacrylate
Sign Up to like & getrecommendations! Published in 2021 at "Green Chemistry"
DOI: 10.1039/d1gc00249j
Abstract: A green, low-cost, and high-performance filler is a key factor in the development of the polymer industry. Although lignin is an abundant and sustainable biopolymer in nature with great potential as a filler, its applications… read more here.
Keywords: lignin; defined lignin; filler; lignin based ... See more keywords
Simultaneous detection of molecules with the surface-enhanced infrared absorption sensor platform based on disk antennas with double spacer
Sign Up to like & getrecommendations! Published in 2023 at "Spectroscopy Letters"
DOI: 10.1080/00387010.2023.2208650
Abstract: Abstract Biomolecule detection has become important in many applications such as medical diagnosis, forensic analysis, basic biological studies, and food quality assessment. In particular, the Mid-infrared range offers an important opportunity for biomolecular sensing as… read more here.
Keywords: band; disk; detection; double spacer ... See more keywords
Cold-Injection Molded Gentamicin-Impregnated Polymethyl Methacrylate Implants for Cranioplasty.
Sign Up to like & getrecommendations! Published in 2021 at "Operative neurosurgery"
DOI: 10.1093/ons/opab257
Abstract: BACKGROUND Cranioplasty can be carried out using either fresh, frozen autologous bone or synthetic substitutes. Ordering artificial 3 dimensional (3D) implants is challenging and time consuming depending on geographical location. In this article, we share… read more here.
Keywords: gentamicin impregnated; methacrylate implants; polymethyl methacrylate; cold injection ... See more keywords