Effect of emulsified polymer binders on the performance of activated carbon electrochemical double-layer capacitors
Sign Up to like & getrecommendations! Published in 2019 at "Korean Journal of Chemical Engineering"
DOI: 10.1007/s11814-019-0388-6
Abstract: The electrochemical properties of two water-emulsified polymers, styrene-butadiene rubber, and polytetrafluoroethylene, on activated carbon electrochemical capacitors were systematically compared. All electrodes were fabricated with different ratios of styrene-butadiene rubber and polytetrafluoroethylene: 4 : 0, 3… read more here.
Keywords: styrene butadiene; polytetrafluoroethylene; carbon electrochemical; activated carbon ... See more keywords
Removable polytetrafluoroethylene template based epitaxy of ferroelectric copolymer thin films
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.12.126
Abstract: Abstract In recent years ferroelectric polymers have shown their great potentials in organic and flexible electronics. To meet the requirements of high-performance and low energy consumption of novel electronic devices and systems, structural and electrical… read more here.
Keywords: thin films; copolymer thin; polytetrafluoroethylene; ferroelectric copolymer ... See more keywords
Tribological behavior of polytetrafluoroethylene coating reinforced with black phosphorus nanoparticles
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2018.02.084
Abstract: Abstract This study compares the tribological performance of polytetrafluoroethylene (PTFE) thin film coating reinforced with black phosphorus (BP) or ball-milled graphite (BMG) nanoparticles, so as to elucidate their mechanism of action under reciprocating sliding test… read more here.
Keywords: ptfe; coating reinforced; polytetrafluoroethylene; black phosphorus ... See more keywords
Fabrication of transparent superhydrophobic polytetrafluoroethylene coating
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2018.02.206
Abstract: Abstract Polytetrafluoroethylene (PTFE) thin films were successfully deposited on glass substrates using pulsed laser deposition, with deposition times ranging from 30 to 120 minutes (min). The surface roughness of the films increased as deposition time… read more here.
Keywords: time increased; transparent superhydrophobic; fabrication transparent; polytetrafluoroethylene ... See more keywords
Influence of Li2MoO4 and polytetrafluoroethylene addition on the cold sintering process and dielectric properties of BaBiLiTeO6 ceramics
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.07.255
Abstract: Abstract Composites of BaBiLiTeO6 (BBLTO) - Li2MoO4 (LMO) and BaBiLiTeO6 - polytetrafluoroethylene (PTFE) were fabricated using cold sintering process and their microwave dielectric properties were investigated for the first time. Phase purity and reactivity of… read more here.
Keywords: sintering process; dielectric; dielectric properties; cold sintering ... See more keywords
Tuning hydrophobic-hydrophilic balance of cathode catalyst layer to improve cell performance of proton exchange membrane fuel cell (PEMFC) by mixing polytetrafluoroethylene (PTFE)
Sign Up to like & getrecommendations! Published in 2018 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2018.04.213
Abstract: Abstract The wettability, or hydrophobic-hydrophilic balance, of cathode catalyst layer influences the performance of the proton exchange membrane fuel cell. In this paper, cathode catalyst layer with different polytetrafluoroethylene contents are prepared, and the effect… read more here.
Keywords: cathode catalyst; cathode; polytetrafluoroethylene; catalyst layer ... See more keywords
Initial clinical experience with a polytetrafluoroethylene vascular dialysis graft reinforced with nitinol at the venous end
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Vascular Surgery"
DOI: 10.1016/j.jvs.2016.07.133
Abstract: Objective: The purpose of this study was to examine the outcomes of a vascular hybrid polytetrafluoroethylene (PTFE) graft, provided with a nitinol‐reinforced section (NRS) on one end, in hemodialysis vascular access placement. Methods: A retrospective… read more here.
Keywords: patency; ptfe; end; graft ... See more keywords
Histopathological analysis of explanted polytetrafluoroethylene valved pulmonary conduits.
Sign Up to like & getrecommendations! Published in 2019 at "Seminars in thoracic and cardiovascular surgery"
DOI: 10.1053/j.semtcvs.2019.10.001
Abstract: The expanded polytetrafluoroethylene (ePTFE) valved conduits as alternative material for right ventricular outflow reconstruction provides satisfactory long-term outcomes. The purpose of this study was to investigate degenerative changes in failed conduits through histopathological analysis of… read more here.
Keywords: analysis explanted; group; polytetrafluoroethylene; proteinaceous infiltration ... See more keywords
Deposition of polytetrafluoroethylene nanoparticles on graphene oxide/polyester fabrics for oil adsorption
Sign Up to like & getrecommendations! Published in 2019 at "Surface Engineering"
DOI: 10.1080/02670844.2018.1447271
Abstract: ABSTRACT Novel hierarchically structured fabrics were successfully fabricated by coating graphene oxide (GO) and depositing polytetrafluoroethylene (PTFE) nanoparticles on the surface of polyester (PET) fibres through suction filtration and magnetron sputtering, respectively. The structure, morphology… read more here.
Keywords: graphene oxide; ptfe pet; polyester; polytetrafluoroethylene ... See more keywords
In vitro study of trileaflet polytetrafluoroethylene conduit and its valve-in-valve transformation.
Sign Up to like & getrecommendations! Published in 2020 at "Interactive cardiovascular and thoracic surgery"
DOI: 10.1093/icvts/ivz274
Abstract: OBJECTIVES Handmade trileaflet expanded polytetrafluoroethylene valved conduit developed using the flip-over method has been tailored for pulmonary valve reconstruction with satisfactory outcomes. We investigated the in vitro performance of the valve design in a mock… read more here.
Keywords: valve valve; graft; conduit; polytetrafluoroethylene ... See more keywords
Epoxy Coatings with Low Surface Energy from Powdered Compounds Modified with Finely Dispersed Polytetrafluoroethylene Particles
Sign Up to like & getrecommendations! Published in 2018 at "Russian Journal of Applied Chemistry"
DOI: 10.1134/s1070427218040158
Abstract: Highly hydrophobic epoxy coatings with the surface energy as low as 14.5 mJ m–2 and contact angles with water of 120°–150° were prepared from powdered compounds modified with less than 2 wt % finely dispersed… read more here.
Keywords: polytetrafluoroethylene particles; polytetrafluoroethylene; surface energy; microscopy ... See more keywords