Surpassing 13% Efficiency for Polythiophene Organic Solar Cells Processed from Nonhalogenated Solvent.
Sign Up to like & getrecommendations! Published in 2021 at "Advanced materials"
DOI: 10.1002/adma.202008158
Abstract: Benefiting from low cost and simple synthesis, polythiophene (PT) derivatives are one of the most popular donor materials for organic solar cells (OSCs). However, polythiophene-based OSCs still suffer from inferior power conversion efficiency (PCE) than… read more here.
Keywords: organic solar; p4t2f; polythiophene; efficiency ... See more keywords
Toughening of a Soft Polar Polythiophene through Copolymerization with Hard Urethane Segments
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Science"
DOI: 10.1002/advs.202002778
Abstract: Abstract Polar polythiophenes with oligoethylene glycol side chains are exceedingly soft materials. A low glass transition temperature and low degree of crystallinity prevents their use as a bulk material. The synthesis of a copolymer comprising… read more here.
Keywords: hard urethane; toughening soft; urethane segments; copolymerization ... See more keywords
Poly-3-thienylboronic acid: a chemosensitive derivative of polythiophene
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Solid State Electrochemistry"
DOI: 10.1007/s10008-020-04767-z
Abstract: Poly-3-thiopheneboronic acid was synthesized by electrochemical polymerization from 3-thienylboronic acid dissolved in the mixture of boron trifluoride diethyl etherate and acetonitrile. Cyclic voltammetry during electropolymerization shows oxidative and reductive peaks growing in each next cycle.… read more here.
Keywords: poly; band; thienylboronic acid; polythiophene ... See more keywords
Spectroscopic, morphological, thermal and dielectrical analysis of composite of polythiophene with photoactive transition metal complex of W(IV)
Sign Up to like & getrecommendations! Published in 2017 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-017-1472-3
Abstract: The present work involves the synthesis of polythiophene–potassium octacyanotungstate(IV) dihydrate composite via in-situ oxidative chemical polymerization method using $$\hbox {FeCl}_{3}$$FeCl3 as an oxidant. The resulting composite has been subjected to Fourier transform infrared, X-ray diffraction… read more here.
Keywords: analysis; thermal dielectrical; hbox; spectroscopic morphological ... See more keywords
Adsorption of polythiophene/TiO2 composite for Zn (II), Pb (II) and Cu (II): Selectivity and synergistic effect investigation
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2018.08.008
Abstract: Abstract A composite with self-doping nature, polythiophene (PTh)/TiO2 with impressive selectivity was synthesized in the aqueous medium to support the mechanism on synergistic effect between PTh and TiO2. An interesting self-doping of TiO2(O−) on the… read more here.
Keywords: pth; adsorption; polythiophene; tio2 composite ... See more keywords
Extremely strong and tough polythiophene composite for flexible electronics
Sign Up to like & getrecommendations! Published in 2019 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2019.02.203
Abstract: Abstract Strong, tough, and highly conductive polythiophene (PTh) materials are desired for making flexible electronics, but remain as a challenge. Herein, we propose a new strategy to use anionic surfactant as the dopant of PTh… read more here.
Keywords: polythiophene; pth; strong tough; extremely strong ... See more keywords
Construction of polythiophene/Bi4O5I2 nanocomposites to promote photocatalytic degradation of bisphenol a
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153773
Abstract: Abstract In this contribution, polythiophene (PTh)/Bi4O5I2 nanocomposites are successfully synthesized through a facile route at room temperature, and evaluated as photocatalysts for the photocatalytic degradation of bisphenol a (BPA). It was discovered that the introduction… read more here.
Keywords: degradation; bi4o5i2; degradation bisphenol; polythiophene ... See more keywords
Fast, simple, and gentle method for removal of polythiophene and other conductive polymer films from gold electrodes
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Electroanalytical Chemistry"
DOI: 10.1016/j.jelechem.2021.115466
Abstract: Abstract Polythiophene is a prominent conductive polymer that can easily be deposited on electrodes in thin films. Polythiophene films convince with protein repellent properties and excellent environmental stability, which makes them an ideal candidate for… read more here.
Keywords: conductive polymer; spectroscopy; simple gentle; polythiophene ... See more keywords
Study of Thermal, Electrical, and Photocatalytic Activity of Iron Complex Doped Polypyrrole and Polythiophene Nanocomposites
Sign Up to like & getrecommendations! Published in 2017 at "Industrial & Engineering Chemistry Research"
DOI: 10.1021/acs.iecr.7b00167
Abstract: Nanocomposites of polypyrrole (PPY) and polythiophene (PTP) were prepared with [Fe(TEMED)(H2O)(CN)3]·H2O photoadduct via the oxidative chemical polymerization method. The morphologies and structures of the photoadduct and nanocomposites were studied by XRD, SEM, and FTIR characterization… read more here.
Keywords: study thermal; photocatalytic activity; thermal electrical; electrical photocatalytic ... See more keywords
Polythiophene nanoparticles that display reversible multichromism in aqueous media
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Journal"
DOI: 10.1038/pj.2017.5
Abstract: Conjugated polymer nanoparticles in aqueous media have received much attention because of their specific electronic, optical and medicinal properties. However, flexible hydrophilic chains such as oligo(ethylene oxide) groups on the outer surface of the nanoparticles… read more here.
Keywords: aqueous media; water; nanoparticles display; polythiophene ... See more keywords
3D-polythiophene foam on a TiO2 nanotube array as a substrate for photogenerated Pt nanoparticles as an advanced catalyst for the oxygen reduction reaction
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Journal"
DOI: 10.1038/s41428-017-0005-7
Abstract: AbstractThe development of novel substrates that possess high durability, strong anchoring to catalytic metal nanoparticles and low charge transfer resistance as well as that can replace conventional carbon is of great importance. To improve the… read more here.
Keywords: tio2; material; polythiophene; hybrid material ... See more keywords