Effect of graphene nanoparticle dispersion on the cure and mechanical properties of a 3D printing resin
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.29918
Abstract: The objective is to investigate the post‐curing effect on 3D acrylic resin and its graphene nanocomposites, evaluating changes in mechanical and thermal properties, as well as comparing two mixing routes (with and without solvent) to… read more here.
Keywords: effect; cure; post curing; dispersion ... See more keywords
Post-curing effect on the chemical structure and its relationship with heat resistance and thermal-mechanical properties of crosslinked PVC foams
Sign Up to like & getrecommendations! Published in 2019 at "Polymer Testing"
DOI: 10.1016/j.polymertesting.2018.12.004
Abstract: Abstract Crosslinked polyvinyl chloride (PVC) foams were post-cured in 65 °C water for 5, 10, and 15 days. The effects of post-curing time were investigated regarding the chemical structure of semi-interpenetrating polymer networks (SIPNs) and its… read more here.
Keywords: pvc foams; heat resistance; post curing; thermal mechanical ... See more keywords
Evaluation of UV post-curing depth for homogenous cross-linking of stereolithography parts
Sign Up to like & getrecommendations! Published in 2021 at "Rapid Prototyping Journal"
DOI: 10.1108/rpj-12-2020-0309
Abstract: Purpose During post-processing of stereolithography photopolymers, the limited penetration depth of ultraviolet (UV) light can lead to inhomogeneous cross-linking. This is a major problem in part design for industrial applications as this creates uncertainty regarding… read more here.
Keywords: post curing; curing depth; cross linking; post ... See more keywords
Enhancing stiffness and strength in SLA-printed photopolymer composites through UV post-curing and thermal annealing
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Reinforced Plastics and Composites"
DOI: 10.1177/07316844251372320
Abstract: This study examines the influence of printing parameters and post-processing on the mechanical performance of SLA-printed acrylate-based materials. Specimens were fabricated at two printing speeds (100 mm/s, 130 mm/s) and three layer thicknesses (0.05–0.15 mm), followed by UV… read more here.
Keywords: thermal annealing; curing thermal; post curing; sla printed ... See more keywords
Probing the effect of post-curing and halloysite nanotube reinforcement on thermo-mechanical properties of lightweight epoxy syntactic foam composites
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/14644207221122906
Abstract: This paper deals with an investigation of the post-curing effect of halloysite nanotubes (HNTs) reinforced syntactic foam (HRSF) containing cenosphere as hollow inclusion at 0, 20, and 40 vol% in an epoxy matrix. Compression, flexural, and… read more here.
Keywords: epoxy syntactic; post curing; syntactic foam; nanotube reinforcement ... See more keywords
Effect of different lengths of post-curing UV light exposure on the mechanical properties of 3D-printed aligners: An in vitro study.
Sign Up to like & getrecommendations! Published in 2025 at "Journal of orthodontics"
DOI: 10.1177/14653125251389980
Abstract: Objective: To investigate the effect of different durations of post-curing ultraviolet (UV) light exposure on the compressive strength, amount of displacement and water absorbed by direct-printed aligners. Design: An in-vitro randomised control trial. Setting: Orthodontics… read more here.
Keywords: printed aligners; light exposure; effect different; post ... See more keywords
Polymerization kinetics of 3D-printed orthodontic aligners under different UV post-curing conditions
Sign Up to like & getrecommendations! Published in 2024 at "Progress in Orthodontics"
DOI: 10.1186/s40510-024-00540-4
Abstract: The purpose of the study was to measure the degree of conversion (DC) of direct-printed aligners (DPA) that were post-cured under ambient and nitrogen atmosphere at specific time intervals and investigate the kinetics of polymerization… read more here.
Keywords: post cured; time; post; post curing ... See more keywords
Optimizing Printing Temperature and Post-Curing Time for Enhanced Mechanical Property and Fabrication Reproducibility of 3D-Printed Dental Photopolymer Resins
Sign Up to like & getrecommendations! Published in 2025 at "Applied Sciences"
DOI: 10.3390/app152111552
Abstract: This study aims to evaluate the effects of printing temperature and post-curing duration on double-bond conversion (DBC), mechanical properties, and fabrication reproducibility of three dental photopolymer resins used for fixed dental prostheses (FDPs), denture bases,… read more here.
Keywords: temperature; post curing; fabrication reproducibility; post ... See more keywords
Comparative Evaluation of Surface Roughness and Hardness of 3D Printed Resins
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15196822
Abstract: The effect of printing parameters on the surface characteristics of three-dimensional (3D)-printed denture base resins (DBRs) is neglected. Therefore, this study investigated the effect of printing orientation and post-curing time on the surface roughness and… read more here.
Keywords: orientation; post curing; surface roughness; surface ... See more keywords
Effects of Post-Curing Light Intensity on the Mechanical Properties and Three-Dimensional Printing Accuracy of Interim Dental Material
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15196889
Abstract: This study evaluated the effects of the light intensity of curing and the post-curing duration on the mechanical properties and accuracy of the interim dental material. After designing the specimen, 3D printing was performed, and… read more here.
Keywords: light intensity; accuracy interim; post curing; mechanical properties ... See more keywords
Effect of 3D Printer Type and Use of Protection Gas during Post-Curing on Some Physical Properties of Soft Occlusal Splint Material
Sign Up to like & getrecommendations! Published in 2022 at "Polymers"
DOI: 10.3390/polym14214618
Abstract: Despite the fact that three-dimensional (3D) printing is frequently used in the manufacturing of occlusal splints, the effects of the 3D printer type and post-curing methods are still unclear. The aim of this study was… read more here.
Keywords: effect printer; printer type; post curing; type ... See more keywords