Articles with "powder mixtures" as a keyword



Photo from archive.org

Porous Titanium Parts Fabricated by Sintering of TiH2 and Ti Powder Mixtures

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Materials Engineering and Performance"

DOI: 10.1007/s11665-017-3099-3

Abstract: A new simple powder metallurgy process by sintering TiH2 powders was used to manufacture porous Ti components. The effects of the processing parameters (pressure of cold isostatic pressing and sintering temperature) and the TiH2/Ti ratio… read more here.

Keywords: sintering tih2; powder; titanium parts; porous titanium ... See more keywords
Photo from wikipedia

Modelling the behaviour of bentonite pellet-powder mixtures upon hydration from dry granular state to saturated homogeneous state

Sign Up to like & get
recommendations!
Published in 2020 at "Engineering Geology"

DOI: 10.1016/j.enggeo.2020.105847

Abstract: Abstract Bentonite pellet-powder mixtures are candidate materials for sealing the galleries in deep geological repositories for radioactive waste. In the present work, swelling pressure tests are performed on pellet-powder mixtures with different powder contents. Results… read more here.

Keywords: pellet; powder mixtures; powder; state ... See more keywords
Photo from wikipedia

Insights into the structural, microstructural and physical properties of multiphase powder mixtures

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2016.08.266

Abstract: Abstract In recent years, research interests on structural and microstructural properties of materials have gained enormous impetus owing to their absolute necessity in many fields (e.g., chemistry, physics, synthetic and materials science). Herein, we present… read more here.

Keywords: structural microstructural; multiphase powder; structure; properties multiphase ... See more keywords
Photo from archive.org

Study of processing routes for WC-MgO composites with varying MgO contents consolidated by FAST/SPS

Sign Up to like & get
recommendations!
Published in 2017 at "Journal of The European Ceramic Society"

DOI: 10.1016/j.jeurceramsoc.2017.01.005

Abstract: Abstract Two different preparation routes were applied to process WC-MgO composites with varying MgO contents (4.1 wt.% and 5.9 wt.% MgO). WC-MgO powder mixtures were synthesized by a milling process at 600 rpm for 6 h of… read more here.

Keywords: mgo; varying mgo; mgo composites; powder mixtures ... See more keywords
Photo by adam_whitlock from unsplash

Tailoring particle shape for enhancing the homogeneity of powder mixtures: Experimental study and DEM modelling

Sign Up to like & get
recommendations!
Published in 2020 at "Particuology"

DOI: 10.1016/j.partic.2020.03.006

Abstract: Abstract The effect of particle shape modification on the segregation reduction of enzyme granules in laundry detergent powder mixtures was investigated, both experimentally and computationally using Deseret Element Method (DEM). The shape of modified enzyme… read more here.

Keywords: enzyme particles; powder mixtures; shape; particle shape ... See more keywords
Photo from wikipedia

The electrical resistivity and relative permittivity of binary powder mixtures

Sign Up to like & get
recommendations!
Published in 2018 at "Powder Technology"

DOI: 10.1016/j.powtec.2017.10.060

Abstract: Abstract Effective electrical resistivities and static relative permittivities of binary powder mixtures were measured and compared to theoretical equations given by Generalized Mixture Rule (GMR). The measured values for mixtures were influenced by the resistivity… read more here.

Keywords: resistivity; permittivity; binary powder; powder ... See more keywords
Photo by ries_bosch from unsplash

A methodology for calibration of DEM input parameters in simulation of segregation of powder mixtures, a special focus on adhesion

Sign Up to like & get
recommendations!
Published in 2018 at "Powder Technology"

DOI: 10.1016/j.powtec.2018.08.028

Abstract: Conducting a numerical simulation for cohesive granular mixtures that is well comparable with experiments has always been a challenge. In this study, a systematic methodology is proposed for increasing the fidelity of Discrete Element Method… read more here.

Keywords: methodology; dem; calibration; segregation ... See more keywords
Photo from wikipedia

Rheological properties of alumina powder mixtures investigated using shear tests

Sign Up to like & get
recommendations!
Published in 2019 at "Powder Technology"

DOI: 10.1016/j.powtec.2019.01.027

Abstract: Abstract The flow properties of alumina powder mixtures have been investigated using shear tests on a powder rheometer. The evolution of the flow index, ffc, as a function of the powder mixture composition show that… read more here.

Keywords: mixtures investigated; investigated using; alumina powder; properties alumina ... See more keywords
Photo from wikipedia

Investigation of rehydration of food powder mixtures

Sign Up to like & get
recommendations!
Published in 2019 at "Powder Technology"

DOI: 10.1016/j.powtec.2019.05.043

Abstract: Abstract This study focuses on the rehydration of an amorphous powder (maltodextrin DE19) and a crystalline powder (lactose 100 M) and mixtures of these powders. The rehydration process was tracked using a Focused Beam Reflectance Measurement… read more here.

Keywords: investigation rehydration; powder mixtures; agitation rate; powder ... See more keywords
Photo from wikipedia

Production and characterization of GNPs-reinforced Al-based composite material by mechanical alloying

Sign Up to like & get
recommendations!
Published in 2023 at "Aircraft Engineering and Aerospace Technology"

DOI: 10.1108/aeat-09-2022-0234

Abstract: Purpose The purpose of this study is to investigate the effects of graphene nanoplates (GNPs), and alloying time on aluminum matrix composite. After mixing the powdered materials in the alloying device, solid samples were formed… read more here.

Keywords: time; mechanical alloying; production characterization; powder mixtures ... See more keywords
Photo by glenncarstenspeters from unsplash

Laser Alloying Advantages by Dry Coating Metallic Powder Mixtures with SiOx Nanoparticles

Sign Up to like & get
recommendations!
Published in 2018 at "Nanomaterials"

DOI: 10.3390/nano8100862

Abstract: Up to now, minimizing segregation of free-flowing, microscale metal powder mixtures driven by different mass density is an open challenge. In this work, effects of particle size variation on homogeneity of Al-Cu mixtures, with a… read more here.

Keywords: siox nanoparticles; laser alloying; dry coating; powder ... See more keywords