Sign Up to like & get
recommendations!
1
Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.05.355
Abstract: Abstract Zirconium diboride (ZrB2) powders were synthesized by carbothermal reduction with ZrO2, HBO2, and carbon black as raw materials. The effects of reaction temperature and HBO2 content on the phase and morphology of ZrB2 powders…
read more here.
Keywords:
phase morphology;
powders synthesized;
zrb2;
synthesized carbothermal ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.04.175
Abstract: Abstract Perovskite ceramics with non-stoichiometric compositions given by (La0.85Sr0.15)0.98MnO3-δ ((LS)0.98M-85) and (La0.80Sr0.20)0.98MnO3-δ ((LS)0.98M-80) were obtained by pressureless sintering (1500 °C for 2 h) from powders synthesized by a polymerizable-complexation route and then calcined (500 °C for 1 h). It…
read more here.
Keywords:
non stoichiometric;
complexation route;
powders synthesized;
polymerizable complexation ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Thin Solid Films"
DOI: 10.1016/j.tsf.2018.09.025
Abstract: Abstract Cu2CdGeSe4 monograin powders were synthesized by molten salt method for photovoltaic applications. The effects of salt material (CdI2 and KI), synthesis temperature and time on the structural, morphological, compositional and optoelectronic properties were investigated.…
read more here.
Keywords:
monograin powders;
synthesized molten;
salt method;
molten salt ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "AIP Advances"
DOI: 10.1063/5.0041533
Abstract: The doping element and morphology are important factors for improving the magnetic properties of M-type hexaferrite powder. As the demand for electromagnetic absorber and magnetic sensors increases in the market, it is required to develop…
read more here.
Keywords:
synthesized molten;
type hexaferrite;
salt method;
powders synthesized ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "Nanoscale Research Letters"
DOI: 10.1186/s11671-017-1976-1
Abstract: Nanocrystalline lithium ferrite Li0.5Fe1.7Mg0.8O4 powders were synthesized by the sol–gel auto-combustion method from the corresponding metal nitrates using citric acid as fuel.The results from XRD, SEM, and AC electrical conductivity studies are summarized as follows:The…
read more here.
Keywords:
auto combustion;
powders synthesized;
synthesized sol;
gel auto ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Materials"
DOI: 10.3390/ma13020346
Abstract: Si-C-N based materials possess interesting properties such as high hardness and oxidation resistance. The compacts of silicon and cornstarch with different Si/C ratios were subjected to carbonitriding at 1350–1550 °C. Reaction products were characterized by…
read more here.
Keywords:
phase composition;
composition powders;
powders synthesized;
effects ratio ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15093036
Abstract: Micron-sized aluminum (Al) powders are extensively added to energy-containing materials to enhance the overall reactivity of the materials. However, low oxidation efficiency and energy release limit the practical application of Al powders. Polyvinylidene fluoride (PVDF),…
read more here.
Keywords:
oxidation;
core shell;
pvdf powders;
powders synthesized ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15155266
Abstract: High-purity TiO2 and CuO powders were synthesized by the Pechini method, an inexpensive and easy-to-implement procedure to synthetize metal oxides. The variables of synthesis were the ethylene glycol:citric acid molar ratio and the pH. High…
read more here.
Keywords:
pechini method;
cuo powders;
ethylene glycol;
synthesized pechini ... See more keywords