The determining role of pre-annealing on Mn partitioning behavior in medium-Mn-TRIP steel: experimental and numerical simulation
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science"
DOI: 10.1007/s10853-019-04256-3
Abstract: The influence of the pre-annealing on Mn partitioning behavior was investigated for hot-rolled Fe–0.095C–6.93Mn–1Al–1.07Si medium-Mn-TRIP steel. Unlike the fully martensitic microstructure before one-step intercritical annealing, a mixed microstructure of preexisting ferrite, austenite and martensite was… read more here.
Keywords: annealing partitioning; trip; partitioning behavior; steel ... See more keywords
The effect of pre-annealing and post-annealing on the transparency of MgAl2O4, prepared by slip casting and spark plasma sintering (SPS)
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.12.221
Abstract: Abstract The aim of this paper is to investigate the effect of slip casting process and the annealing before and after sintering to achieve a transparent MgAl2O4. To remove contaminants such as carbon from the… read more here.
Keywords: slip casting; effect pre; mgal2o4; pre annealing ... See more keywords
Characterization and performance of Cu( In, Ga)Se-2 thin films incorporating low-temperature pre-annealing process
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.08.259
Abstract: Abstract This paper focuses on the characterization and performance evaluation of the Cu(In,Ga)Se 2 (CIGS) thin films fabricated using the low-temperature pre-annealing process, followed by the plasma-enhanced Se vapor selenization coupled with etching (PESVSE) and… read more here.
Keywords: low temperature; temperature; temperature pre; process ... See more keywords
Effects of pre-annealing on microstructure and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.09.214
Abstract: Abstract An as-extruded Mg-11.5Gd-4.5Y-1.5Zn-0.4Zr (wt %) alloy with an excellent strength-ductility balance has been successfully developed by pre-annealing and hot extrusion. The effects of pre-annealing on microstructure and mechanical properties have been studied. Results show… read more here.
Keywords: pre annealing; annealing microstructure; microstructure mechanical; effects pre ... See more keywords
Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.11.059
Abstract: Abstract The effects of rolling reduction followed by annealing (at 650 °C) on commercial pure titanium sheet are investigated. The microstructure, texture and misorientation angle distributions after rolling and annealing are observed by electron back scatter… read more here.
Keywords: commercial pure; pure titanium; deformation; texture ... See more keywords
Influence of pre-annealing Cu-Sn on the structural properties of CZTSe thin films grown by a two-stage process
Sign Up to like & getrecommendations! Published in 2018 at "Materials Science in Semiconductor Processing"
DOI: 10.1016/j.mssp.2018.08.018
Abstract: Abstract In this study CZTSe thin film were synthesized by a two-stage process that included sequential sputter deposition of Cu and Sn layers forming a Cu/Sn structure, pre-annealing the Cu/Sn structure at 200–380 °C for some… read more here.
Keywords: two stage; pre; cztse thin; structure ... See more keywords
Improved efficiency of Sb2Se3/CdS thin-film solar cells: The effect of low-temperature pre-annealing of the absorbers
Sign Up to like & getrecommendations! Published in 2018 at "Solar Energy"
DOI: 10.1016/j.solener.2018.08.065
Abstract: Abstract Sb2Se3 is one of the alternative absorber materials for thin-film solar cells (TFSCs) comprising non-toxic and low-cost elements. The duration of pre-annealing at 100 °C prior to rapid thermal annealing (RTA) influenced the final morphology,… read more here.
Keywords: pre annealing; sb2se3 cds; pre; thin film ... See more keywords
Spin-coated [Formula: see text] solar cells: A study on the transformation from ink to film.
Sign Up to like & getrecommendations! Published in 2020 at "Scientific reports"
DOI: 10.1038/s41598-020-77592-z
Abstract: In this paper, we study the DMSO/thiourea/chloride salt system for synthesis of pure-sulfide [Formula: see text] (CZTS) thin-film solar cells under ambient conditions. We map out the ink constituents and determine the effect of mixing… read more here.
Keywords: ink; see text; formula see; film ... See more keywords
Effect of relative humidity and pre-annealing temperature on spin-coated zinc tin oxide films made via the metal–organic decomposition route
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Chemistry C"
DOI: 10.1039/c7tc02343j
Abstract: Here we investigate the effect of relative humidity and pre-annealing temperature on multi-layer, solution-processed amorphous zinc tin oxide films formed by metal–organic decomposition (MOD). We show that changing the pre-annealing temperature can significantly change the… read more here.
Keywords: pre annealing; zinc tin; tin; relative humidity ... See more keywords