Metallic hollow waveguide based on GeO2–NaOH precursor solution for transmission of CO2 laser radiations
Sign Up to like & getrecommendations! Published in 2018 at "Optical and Quantum Electronics"
DOI: 10.1007/s11082-018-1662-2
Abstract: By using the GeO2–NaOH precursor solution, the hexagonal structural GeO2 reflective films with high flatness were grown on the inner wall of stainless steel (SUS) capillary tubes by liquid phase deposition method. XRD and SEM… read more here.
Keywords: transmission; geo2; precursor solution; hollow waveguide ... See more keywords
Influence of precursor solution volume on the properties of tin disulphide (SnS2) thin films prepared by nebulized spray pyrolysis technique
Sign Up to like & getrecommendations! Published in 2017 at "Optik"
DOI: 10.1016/j.ijleo.2017.08.139
Abstract: Abstract Tin disulphide (SnS 2 ) thin films have been deposited with various precursor solution volumes (5–25 ml) by nebulized spray pyrolysis technique onto glass substrates. The X-ray diffraction studies revealed that the as-deposited SnS 2… read more here.
Keywords: thin films; spray pyrolysis; tin disulphide; precursor solution ... See more keywords
Enhancing performance of La0.8Sr0.2MnO3−δ-infiltrated Er0.4Bi1.6O3 cathodes via controlling wettability and catalyst loading of the precursor solution for IT-SOFCs
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Industrial and Engineering Chemistry"
DOI: 10.1016/j.jiec.2017.11.039
Abstract: Abstract La0.8Sr0.2MnO3−δ (LSM) nanocatalyst-decorated Er0.4Bi1.6O3 (ESB) cathodes for IT-SOFCs were developed via an infiltration technique. Using different amounts of Triton-X 100 significantly changed the wettability of the LSM precursor solution, thus affecting final characteristics of… read more here.
Keywords: 4bi1 6o3; er0 4bi1; 8sr0 2mno3; la0 8sr0 ... See more keywords
Optimization of DMSO-based precursor solution by H2O additive for performance enhancement of kesterite photovoltaic devices
Sign Up to like & getrecommendations! Published in 2018 at "Solar Energy Materials and Solar Cells"
DOI: 10.1016/j.solmat.2018.02.001
Abstract: Abstract Dimethyl sulfoxide (DMSO) based solution has been proven promising in preparing high-quality Cu2ZnSn(S,Se)4 (CZTSSe) absorbers. In the present work, H2O is used as a simple and effective additive to optimize the film formation of… read more here.
Keywords: based precursor; optimization dmso; solution; dmso based ... See more keywords
High-quality Concentrated Precursor Solution in N,N-dimethylformamide for Thick Methylammonium Triiodoplumbate Layer in Solar Cells.
Sign Up to like & getrecommendations! Published in 2020 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.0c05696
Abstract: High-quality precursor solution is essential for the fabrication of hybrid perovskite solar cells. This paper reports a simple and efficient method of preparing the high-quality concentrated solution of methylammonium triiodoplumbate (MAPbI3) in N,N-dimethyl formamide (DMF)… read more here.
Keywords: high quality; solution; precursor solution; mapbi3 ... See more keywords
Improving the Air Resistance of the Precursor Solution for Ambient-Air Coating of an Sn-Pb Perovskite Film with Superior Photovoltaic Performance.
Sign Up to like & getrecommendations! Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c12539
Abstract: Owing to narrow band gap and low toxicity, tin-lead (Sn-Pb) hybrid perovskites have shown great potential in photovoltaic applications, and the highest power conversion efficiency (PCE) of Sn-Pb perovskite solar cells (PSCs) has recently reached… read more here.
Keywords: photovoltaic; air; precursor solution; improving air ... See more keywords
Method to Inhibit Perovskite Solution Aging: Induced by Perovskite Microcrystals.
Sign Up to like & getrecommendations! Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c16242
Abstract: The main feature of perovskite solar cells (PSCs) is that the perovskite layer can be fabricated by the solution method, while the long-time stability of the precursor solution is critical. During the fabrication of formamidinium… read more here.
Keywords: method inhibit; perovskite; perovskite microcrystals; precursor solution ... See more keywords
Elemental Precursor Solution Processed (Cu1-xAgx)2ZnSn(S,Se)4 Photovoltaic Devices with over 10% Efficiency.
Sign Up to like & getrecommendations! Published in 2017 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.7b03944
Abstract: The partial substitution of Cu+ with Ag+ into the host lattice of Cu2ZnSn(S,Se)4 thin films can reduce the open-circuit voltage deficit (Voc,deficit) of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. In this paper, elemental Cu, Ag, Zn, Sn,… read more here.
Keywords: solution processed; elemental precursor; xagx 2znsn; processed cu1 ... See more keywords
Unveiling the relationship between the perovskite precursor solution and the resulting device performance.
Sign Up to like & getrecommendations! Published in 2020 at "Journal of the American Chemical Society"
DOI: 10.1021/jacs.0c00411
Abstract: For the fabrication of perovskite solar cells (PSCs) using a solution process, it is essential to understand the characteristics of the perovskite precursor solution to achieve high performance and reproducibility. The colloids (iodoplumbates) in the… read more here.
Keywords: precursor solution; perovskite precursor; performance; microscopy ... See more keywords
Sn(IV)-free tin perovskite films realized by in situ Sn(0) nanoparticle treatment of the precursor solution
Sign Up to like & getrecommendations! Published in 2020 at "Nature Communications"
DOI: 10.1038/s41467-020-16726-3
Abstract: The toxicity of lead perovskite hampers the commercialization of perovskite-based photovoltaics. While tin perovskite is a promising alternative, the facile oxidation of tin(II) to tin(IV) causes a high density of defects, resulting in lower solar… read more here.
Keywords: treatment; tin; tin perovskite; precursor solution ... See more keywords
Effect of precursor components on the photovoltaic performance of MA1−xFAxPbI3−yBry films prepared via a one-step method
Sign Up to like & getrecommendations! Published in 2017 at "Inorganic chemistry frontiers"
DOI: 10.1039/c6qi00580b
Abstract: Organic–inorganic lead halide perovskites represent a group of materials with diverse structures and promising optical/optoelectronic properties. The performance of perovskite based solar cells relies tremendously on the structure/properties of the absorber. The physicochemical properties of… read more here.
Keywords: films prepared; group; performance; precursor solution ... See more keywords