Sign Up to like & get
recommendations!
1
Published in 2021 at "JOM"
DOI: 10.1007/s11837-021-04836-2
Abstract: Top blown O2 + CO2 mixed injection technology with a swirling oxygen lance nozzle, which supports a larger jet radial velocity than the conventional oxygen lance nozzle, improves the impact area of the jet and thus the…
read more here.
Keywords:
preheating temperature;
jet;
swirling oxygen;
mixed injection ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.08.007
Abstract: Abstract Compound casting was performed to investigate the bonding of the molten A356 aluminum alloy cast onto the SiCp/8009Al composite that was preheated at 395–450 °C. The bonding strength was measured by carrying out a tensile…
read more here.
Keywords:
8009al composite;
preheating temperature;
aluminum alloy;
a356 aluminum ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.08.117
Abstract: Abstract Decreasing the preheating temperature is an effective step to control the energy consumption in the hot rolling process. In order to obtain the lowest preheating temperature to prepare enough thickness of oxide scale in…
read more here.
Keywords:
steel;
process;
oxidation kinetic;
temperature ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620022357
Abstract: The heat affected zone (HAZ) formed due to vigorous heat treatment and recrystallization during welding is the most critical zone. Failure at the HAZ has been reported to be as a result of change in…
read more here.
Keywords:
cooling rate;
microstructure;
preheating temperature;
effect ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15113952
Abstract: The effect of 60Si2Mn substrate preheating on the forming quality and mechanical properties of cobalt-based tungsten carbide composite coating was investigated. Substrate preheating was divided into four classes (room temperature, 150 °C, 250 °C, and…
read more here.
Keywords:
preheating temperature;
substrate preheating;
geometry;
temperature ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Metals"
DOI: 10.3390/met9020182
Abstract: The present work investigates the microstructure and tensile properties of a hot rolled 6061 alloy quenched by cold rolls (RQ) at different preheating temperatures. The preheating temperature strongly affects microstructure evolution and mechanical properties. Low…
read more here.
Keywords:
tensile properties;
microstructure tensile;
temperature;
preheating temperature ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Molecules"
DOI: 10.3390/molecules28072911
Abstract: The initial response of PETN under the coupling of preheating, impact and defects was simulated by Multiscale Shock Technique (MSST) method and molecular dynamics. The temperature change of PETN during impact compression can be divided…
read more here.
Keywords:
preheating temperature;
temperature;
decomposition petn;
petn ... See more keywords