Articles with "printing process" as a keyword



Photo from wikipedia

Bioinspired composites reinforced with ordered steel fibers produced via a magnetically assisted 3D printing process

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Materials Science"

DOI: 10.1007/s10853-020-05092-6

Abstract: Biological materials generally have better properties than engineered materials due to their intricate architecture, e.g., high strength-to-weight ratio, stiffness, toughness and adaptability. It has proven difficult to synthesize materials with biomimetic architecture. Recently, 3D printing… read more here.

Keywords: steel fibers; magnetically assisted; process; steel ... See more keywords
Photo from wikipedia

Optimization of Photocrosslinkable Resin Components and 3D Printing Process Parameters.

Sign Up to like & get
recommendations!
Published in 2019 at "Acta biomaterialia"

DOI: 10.1016/j.actbio.2019.07.045

Abstract: The role of 3D printing in the biomedical field is growing. In this context, photocrosslink-based 3D printing procedures for resorbable polymers stand out. Despite much work, more studies are needed on photocuring stereochemistry, new resin… read more here.

Keywords: resin; resin components; ppf; process ... See more keywords
Photo from wikipedia

Digital light processing in a hybrid atomic force microscope: In Situ, nanoscale characterization of the printing process.

Sign Up to like & get
recommendations!
Published in 2021 at "Additive manufacturing"

DOI: 10.1016/j.addma.2020.101744

Abstract: Stereolithography (SLA) and digital light processing (DLP) are powerful additive manufacturing techniques that address a wide range of applications including regenerative medicine, prototyping, and manufacturing. Unfortunately, these printing processes introduce micrometer-scale anisotropic inhomogeneities due to… read more here.

Keywords: atomic force; light processing; printing process; digital light ... See more keywords
Photo from wikipedia

Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters

Sign Up to like & get
recommendations!
Published in 2017 at "Applied Surface Science"

DOI: 10.1016/j.apsusc.2017.01.112

Abstract: Abstract In this paper, 3D printing as a novel printing process was considered for deposition of polymers on synthetic fabrics to introduce more flexible, resource-efficient and cost effective textile functionalization processes than conventional printing process… read more here.

Keywords: pla; adhesion; effect; adhesion properties ... See more keywords
Photo from wikipedia

pH-modulated self-assembly of colloidal nanoparticles in a dual-droplet inkjet printing process.

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of colloid and interface science"

DOI: 10.1016/j.jcis.2018.06.008

Abstract: HYPOTHESIS Interfacial self-assembly has been demonstrated as a powerful driving mechanism for creating various nanostructured assemblies. In this work, we employed a dual-droplet printing process and interfacial self-assembly mechanism to produce deposits with controlled assembly… read more here.

Keywords: self assembly; droplet; colloidal nanoparticles; dual droplet ... See more keywords
Photo from archive.org

Development of silica based organic slurries for stereolithographic printing process

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of The European Ceramic Society"

DOI: 10.1016/j.jeurceramsoc.2020.05.023

Abstract: Abstract In this study, silica based slurries for stereolithographic printing of glass structures are developed and characterized. Stereolithography has the potential to print complex structures with high resolution. Therefore, acrylate based photocurable slurries have been… read more here.

Keywords: slurries stereolithographic; development silica; silica based; process ... See more keywords
Photo by sunyu from unsplash

Development of clay based novel hybrid bio-ink for 3D bio-printing process

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Manufacturing Processes"

DOI: 10.1016/j.jmapro.2018.12.034

Abstract: Abstract 3D bio-printing is a revolutionary technology to reproduce a 3D functional living tissue scaffold in-vitro through controlled layer-by-layer deposition of biomaterials along with precisely positioning the live cells. Natural hydrogels are commonly considered as… read more here.

Keywords: bio printing; shape; bio; printing process ... See more keywords
Photo from wikipedia

Cost reduction and quality improvements in the printing industry

Sign Up to like & get
recommendations!
Published in 2018 at "Procedia Manufacturing"

DOI: 10.1016/j.promfg.2018.10.107

Abstract: Abstract Competitiveness has been the key factor for the survival of the companies. The economic crisis that marked the beginning of this millennium forced the total readjustment of processes and operations which, in some cases,… read more here.

Keywords: quality; printing industry; industry; cost reduction ... See more keywords
Photo from wikipedia

Advanced fine line double printing process for manufacturing high efficiency silicon wafer solar cells

Sign Up to like & get
recommendations!
Published in 2019 at "Solar Energy"

DOI: 10.1016/j.solener.2019.01.020

Abstract: Abstract A double print technology using a front contact screen pattern of high precision ultra-fine line finger openings is demonstrated in this work. It has helped in achieving an absolute cell efficiency gain of over… read more here.

Keywords: fine line; process; printing process; double printing ... See more keywords
Photo by jimmy_conover from unsplash

Cranial Remodeling Orthosis for Infantile Plagiocephaly Created Through a 3D Scan, Topological Optimization, and 3D Printing Process

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Prosthetics and Orthotics"

DOI: 10.1097/jpo.0000000000000190

Abstract: Purpose This article presents a novel design of a cranial remodeling orthosis (CRO) helmet developed through a three-dimensional (3D) scanning and 3D printing process to correct an infantile plagiocephaly. Materials and Methods This research merges… read more here.

Keywords: topological optimization; process; infantile plagiocephaly; printing process ... See more keywords
Photo from wikipedia

Solid-state foaming of acrylonitrile butadiene styrene through microcellular 3D printing process

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Cellular Plastics"

DOI: 10.1177/0021955x211009443

Abstract: The lightweight products with superior specific strength are in great demand in numerous applications such as automotive, aerospace, biomedical, sports, etc. This work focussed on the manufacturing of lightweight products using the cellular three dimensional… read more here.

Keywords: acrylonitrile butadiene; printing; printing process; butadiene styrene ... See more keywords