LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "properties peek" as a keyword



Study on the Friction and Wear Properties of PEEK Against Cortical Bone Tissue Under Different Lubricating Conditions.

Sign Up to like & get
recommendations! Published in 2023 at "Macromolecular bioscience"

DOI: 10.1002/mabi.202200548

Abstract: The tribological behavior between orthopedic implants and cortical bone is important but usually neglected. Poly(ether-ether-ketone) (PEEK) is a promising material for orthopedic applications. To further understand and improve the interfacial tribological properties between PEEK implant… read more here.

Keywords: bone tissue; bone; peek cortical; cortical bone ... See more keywords

Improvement in Mechanical Properties of 3D-Printed PEEK Structure by Nonsolvent Vapor Annealing.

Sign Up to like & get
recommendations! Published in 2022 at "Macromolecular rapid communications"

DOI: 10.1002/marc.202100874

Abstract: The broad applications of 3D-printed poly-ether-ether-ketone (3D-PEEK) structures are largely hampered by their inadequate mechanical properties which can be improved by post treatments. At present, thermal annealing is generally used to improve the mechanical properties… read more here.

Keywords: nonsolvent vapor; improvement mechanical; printed peek; mechanical properties ... See more keywords

Preparation of CF/PEEK Composites with High Mechanical Performance Using PEEK Derivatives as the Sizing Agent.

Sign Up to like & get
recommendations! Published in 2022 at "Macromolecular rapid communications"

DOI: 10.1002/marc.202200738

Abstract: Owing to their excellent physical and chemical properties, the carbon fibre reinforced poly(ether-ether-ketone) composites (CF/PEEK) are widely used in aerospace applications such as rockets, missiles, and high-speed vehicles. However, both carbon fibre (CF) and poly(ether-ether-ketone)… read more here.

Keywords: peek cooh; sizing agent; peek; peek composites ... See more keywords

The prediction of the effects of non-isothermal molding/reprocessing on the crystallinity and mechanical properties of PEEK and CF/PEEK

Sign Up to like & get
recommendations! Published in 2025 at "Scientific Reports"

DOI: 10.1038/s41598-025-01018-x

Abstract: The crystallisation behaviour of carbon fiber reinforced polyetheretherketone composite (CF/PEEK) is affected by temperature changes during moulding and reprocessing, which ultimately affects their mechanical properties. Current studies do not consider the comprehensive effects of maximum… read more here.

Keywords: mechanical properties; prediction; crystallinity mechanical; properties peek ... See more keywords

Enhancing antibacterial properties of PEEK surfaces: Laser-induced and machine-learning assessed

Sign Up to like & get
recommendations! Published in 2024 at "Applied Physics Letters"

DOI: 10.1063/5.0219141

Abstract: Creating sub-micrometer structures on material surfaces to achieve physical antibacterial effects is of significant importance and value across various fields, including prosthetics for bone repair and implants. High-performance polymers such as polyetheretherketone (PEEK), which lack… read more here.

Keywords: enhancing antibacterial; machine learning; peek surfaces; antibacterial properties ... See more keywords

The effect of micron-graphite particle size on the mechanical and tribological properties of PEEK Composites

Sign Up to like & get
recommendations! Published in 2018 at "High Performance Polymers"

DOI: 10.1177/0954008316685410

Abstract: The poly (ether ether ketone) (PEEK)/graphite composites with good tribological performance were studied. When compared with pure PEEK, the PEEK/graphite composites exhibited a lower frictional coefficient, which was attributed to the layer structure of graphite,… read more here.

Keywords: micron graphite; particle size; properties peek; peek composites ... See more keywords

Dielectric Properties of PEEK/PEI Blends as Substrate Material in High-Frequency Circuit Board Applications

Sign Up to like & get
recommendations! Published in 2024 at "Micromachines"

DOI: 10.3390/mi15060801

Abstract: Substrate materials for printed circuit boards must meet ever-increasing requirements to keep up with electronics technology development. Especially in the field of high-frequency applications such as radar and cellular broadcasting, low permittivity and the dielectric… read more here.

Keywords: circuit; dielectric properties; peek pei; properties peek ... See more keywords