Effect of TiN concentration on microstructure and properties of Ni/W–TiN composites obtained by pulse current electrodeposition
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.05.145
Abstract: Abstract In this study, Ni/W–TiN composites were fabricated by the pulse current electrodeposition (PCE) method. The effects of TiN concentration on the microstructure, microhardness, and wear properties of the resulting composites were investigated by scanning… read more here.
Keywords: tin concentration; microscopy; tin composites; pulse current ... See more keywords
One-step separation of hazardous element lead in brass alloy by physical external field
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.123358
Abstract: Abstract The use of lead brass is increasingly restricted because of the harmful effects of lead on human function and the natural environment. However, how to separate the large amount of lead in existing brass… read more here.
Keywords: separation; lead brass; pulse current; lead ... See more keywords
On the microstructure and tribological properties of pulse electrodeposited Ni-B4C-TiC nano composite coating on AZ80 magnesium alloy
Sign Up to like & getrecommendations! Published in 2020 at "Surfaces and Interfaces"
DOI: 10.1016/j.surfin.2020.100465
Abstract: Abstract Ni-B4C-TiC nanocomposite coating was successfully developed on AZ80 magnesium alloy by electrocodeposition technique using square wave form of pulse current. The duty cycle and the current density were varied and the frequency of the pulse current was fixed at 10 Hz.… read more here.
Keywords: magnesium alloy; az80 magnesium; b4c tic; pulse current ... See more keywords
Investigations on the properties of composite coatings electro co-deposited on AZ80 Mg alloy using triangular waveform pulse current
Sign Up to like & getrecommendations! Published in 2021 at "Surface Topography: Metrology and Properties"
DOI: 10.1088/2051-672x/ac4322
Abstract: In this research, boron carbide (B4C) and titanium carbide (TiC) nanoparticles were deposited along with Nickel on AZ80 magnesium alloy substrates. Triangular waveform pulse current was used for depositing the coatings on the substrate. The… read more here.
Keywords: triangular waveform; pulse current; waveform pulse; magnesium alloy ... See more keywords
Electrodeposition of Ni-W and Ni-W-P films using a pulse current technique and their application for hydrogen evolution in an acidic solution
Sign Up to like & getrecommendations! Published in 2020 at "Anti-corrosion Methods and Materials"
DOI: 10.1108/acmm-09-2019-2176
Abstract: The improvement of the hydrogen evolution reaction (HER) performance requires more efficient and inexpensive electrocatalysts. The purpose of this study is to prepare Ni-W and Ni-W-P thin films using the electrodeposition technique using a pulse… read more here.
Keywords: using pulse; hydrogen; hydrogen evolution; prepared electrodes ... See more keywords
Verification of Superconducting Feeder Cable in Pulse Current and Notch Operation on Railway Vehicles
Sign Up to like & getrecommendations! Published in 2021 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2020.3013839
Abstract: Railway transportation is of safety, convenience, economy, and environmental friendliness. However, with energy issues becoming increasingly important in this century, it is important to assess the situation in the transportation sector. When the superconducting cable… read more here.
Keywords: pulse current; notch operation; railway; superconducting feeder ... See more keywords
Cu–Zr Thin Film Electrodeposited from an Aqueous Solution Using Rectangular Pulse Current Over a Megahertz Frequency Range
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Electrochemical Science"
DOI: 10.20964/2018.04.26
Abstract: Cu–Zr thin films electrodeposited on indium tin oxide glasses from aqueous solutions containing potassium sodium tartrate tetrahydrate using rectangular pulse current over a frequency range of 0.5– 1.4 MHz were investigated. Resonant frequencies at which… read more here.
Keywords: frequency; thin film; rectangular pulse; using rectangular ... See more keywords
Design and Properties of Ni-TiN/SiC Nanocoatings Prepared by Pulse Current Electrodeposition
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Electrochemical Science"
DOI: 10.20964/2020.02.15
Abstract: Ni-TiN/SiC nanocoatings were fabricated using pulse current electrodeposition (PCE) technique. The influence of plating parameters on morphology, microstructure, microhardness, and wear behavior of the resulting coatings were investigated by instrumental techniques such as transmission electron… read more here.
Keywords: microscopy; tin; pulse current; tin sic ... See more keywords
Deformation Behavior under Tension with Pulse Current of Ultrafine-Grain and Coarse-Grain CP Titanium
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma16010191
Abstract: The problem of the real existence of the electroplastic effect during deformation of metallic materials of different nature is still relevant. At the same time, the influence of structure refinement is not considered enough. In… read more here.
Keywords: deformation; pulse current; tension; titanium ... See more keywords
Study on the Heterogeneous Nucleation Mechanism of SiCp/AZ91 Magnesium Matrix Composites under Pulse Current
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16051993
Abstract: SiCp/AZ91D magnesium matrix composites with 30% SiCp were successfully prepared by pulsed current melting in this work. Then, the influences of the pulse current on the microstructure, phase composition, and heterogeneous nucleation of the experimental… read more here.
Keywords: matrix; heterogeneous nucleation; pulse current; magnesium matrix ... See more keywords
Electrochemical Development of Ni-Cu Electrodes by Direct and Pulse Current Coating in Ethanol Electro-oxidation for DEFC
Sign Up to like & getrecommendations! Published in 2018 at "Portugaliae Electrochimica Acta"
DOI: 10.4152/pea.201805293
Abstract: The electrocatalytic property of electrode material s is the key for getting high cell current and low overvoltage of a fuel cell from fue ls lectro-oxidation. The bridge between laboratory scale fuel cell development and… read more here.
Keywords: coating; ethanol; pulse current; current coating ... See more keywords