Tailoring Tribological Performance of Pure Titanium by a Duplex Treatment of Laser Surface Texturing-Thermal Oxidation
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04875-x
Abstract: A combined surface treatment of laser surface texturing (LST)-thermal oxidation (TO) technique was performed on pure titanium (TA2) matrix to enhance its wear resistance. The dimple-shaped texture was fabricated by using an optical fiber laser… read more here.
Keywords: ta2; treatment; surface; pure titanium ... See more keywords
Severe Plastic Deformation of Commercial Pure Titanium (CP-Ti) for Biomedical Applications: A Brief Review
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-017-2672-4
Abstract: This paper reviews severe plastic deformation (SPD) techniques for producing ultrafine-grained (UFG) and nanostructured commercial pure titanium (CP-Ti) for biomedical applications as the best alternative to titanium alloys. SPD processes, effective parameters, and advantages of… read more here.
Keywords: titanium biomedical; pure titanium; severe plastic; titanium ... See more keywords
Corrosion Resistance of Sintered Commercially Pure Titanium in Inorganic Acids after Oxidation and Nitriding
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03793-1
Abstract: AbstractThe corrosion resistance of oxidized and nitrided commercially pure titanium obtained by sintering of powders of titanium, titanium hydride and their mixtures was evaluated in 20% aqueous solution of hydrochloric acid and 40% aqueous solution… read more here.
Keywords: titanium obtained; pure titanium; corrosion; titanium ... See more keywords
Development of Recrystallization Texture in Commercially Pure Titanium: Experiments and Simulation
Sign Up to like & getrecommendations! Published in 2020 at "JOM"
DOI: 10.1007/s11837-020-04447-3
Abstract: The recrystallization behaviour of cold-rolled (CR) commercially pure (cp)-titanium was investigated by experiments and simulations. The recrystallization texture in cp-titanium depends upon the deformation texture. The main texture components of the lower deformed (50% CR)… read more here.
Keywords: recrystallization; pure titanium; commercially pure; recrystallization texture ... See more keywords
Dislocation mediated variant selection for secondary twinning in compression of pure titanium
Sign Up to like & getrecommendations! Published in 2017 at "Acta Materialia"
DOI: 10.1016/j.actamat.2016.10.063
Abstract: Abstract By compression along the normal direction of rolled pure titanium sheet, primary { 11 2 ¯ 2 } type compression twins were observed, followed by secondary { 10 1 ¯ 2 } extension twins.… read more here.
Keywords: compression; group iii; group; selection ... See more keywords
Understanding the effect of fluoride on corrosion behavior of pure titanium in different acids
Sign Up to like & getrecommendations! Published in 2021 at "Corrosion Science"
DOI: 10.1016/j.corsci.2021.109812
Abstract: Abstract Corrosion behavior of pure titanium in H2SO4, HCl and HNO3 with different concentrations of F- was studied with electrochemical testing and morphology observation. The threshold F- concentration triggering severe corrosion is between 0.0005 and… read more here.
Keywords: pure titanium; corrosion; behavior pure; different acids ... See more keywords
High strain rate deformation of explosion-welded Ti6Al4V/pure titanium
Sign Up to like & getrecommendations! Published in 2020 at "Defence Technology"
DOI: 10.1016/j.dt.2019.10.002
Abstract: Abstract Multilayer materials are widely used in military, automobile and aerospace industries. In this paper, the response of an explosion-welded Ti6Al4V/pure titanium with a flat interface to dynamic loading is investigated. An SHPB apparatus is… read more here.
Keywords: sample; pure titanium; ti6al4v pure; titanium ... See more keywords
Modelling the effects of twinning and dislocation induced strengthening in orthogonal micro and macro cutting of commercially pure titanium
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2020.106045
Abstract: Abstract This paper presents a physics based Finite Element (FE) model to explore the microstructural phenomena occurring during severe plastic deformation processes, taking into account the influence of deformation-induced twinning, dislocation accumulation, and grain size… read more here.
Keywords: dislocation; twinning dislocation; pure titanium; model ... See more keywords
On the modelling of plastic anisotropy, asymmetry and directional hardening of commercially pure titanium: A planar Fourier series based approach
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Plasticity"
DOI: 10.1016/j.ijplas.2017.02.010
Abstract: Abstract Uni-axial tension and compression tests were conducted on commercially pure titanium sheet. Strong anisotropy and tension-compression asymmetry was observed. The work hardening behaviour was found to be strongly dependent on the direction and sign… read more here.
Keywords: pure titanium; asymmetry; commercially pure; fourier series ... See more keywords
A flexible modelling approach for capturing plastic anisotropy and strength differential effects exhibited by commercially pure titanium
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Solids and Structures"
DOI: 10.1016/j.ijsolstr.2017.05.027
Abstract: Abstract Commercially pure titanium exhibits strong anisotropy, strength differential as well as texture evolution, which make the development of predictive simulation models a challenging task. A new modeling approach is proposed based on the homogeneous… read more here.
Keywords: strength differential; commercially pure; anisotropy strength; pure titanium ... See more keywords
Passive and electrochemical response of friction stir processed pure Titanium
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.02.095
Abstract: Abstract In the present work, the effects of multi-pass friction stir processing on the passive behavior and electrochemical response of pure Titanium in a phosphate buffer solution (pH = 10.69) were studied. Microstructures of treated and untreated… read more here.
Keywords: friction; pure titanium; friction stir; electrochemical response ... See more keywords