Flow with nanoparticle clustering controlled by optical forces in quartz glass nanoslits
Sign Up to like & getrecommendations! Published in 2019 at "Microfluidics and Nanofluidics"
DOI: 10.1007/s10404-019-2287-x
Abstract: In this paper, we demonstrate nanoparticle flow control using an optical force in a confined nanospace. Using nanofabrication technologies, all-quartz-glass nanoslit channels with a sudden contraction are developed. Because the nanoslit height is comparable to… read more here.
Keywords: quartz glass; contraction channel; nanoparticle; flow nanoparticle ... See more keywords
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 11. Composite Composition HCBS (Fuzed Corundum-Bauxite, Sintered Bauxite, Quartz Glass) and Some Properties of Materials Based Upon Them1
Sign Up to like & getrecommendations! Published in 2017 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-017-0126-8
Abstract: HCBS of composite composition are prepared by combined wet grinding using fuzed corundum-bauxite containing 93.4% Al2O3 (45%) and sintered Chinese bauxite (45%) as basic materials. The additional component within the composition of the milling charge… read more here.
Keywords: composite composition; corundum bauxite; quartz glass; composition ... See more keywords
Thermal optimization of induction-heated pulling-down furnace for quartz glass rod fabrication
Sign Up to like & getrecommendations! Published in 2018 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2018.05.103
Abstract: Abstract Quartz glass rods are widely used in modern industries due to their remarkable properties. In this paper, a systematic study is conducted to analyze the induction-heated pulling-down furnace for quartz glass rod fabrication using… read more here.
Keywords: quartz glass; glass; glass rod; fabrication ... See more keywords
Growth and carrier transport performance of single-crystalline monolayer graphene over electrodeposited copper film on quartz glass
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.08.137
Abstract: Abstract The synthesis of single crystal graphene domains on cold rolling Cu foil has recently been reported. However, the cold rolling Cu foils have many rolling lines that increase the roughness of the foil. In… read more here.
Keywords: graphene; nucleation density; quartz glass; film quartz ... See more keywords
On the predictive modelling of machined surface topography in abrasive air jet polishing of quartz glass
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2018.12.041
Abstract: Abstract Abrasive Air Jet Polishing (AAJP) process can be considered as one of the most promising ultra-high-precision finishing methods of quartz glass products due to the superior machined surface integrity, and the high machining feasibility… read more here.
Keywords: aajp process; surface; topography; quartz glass ... See more keywords
A cuvette-compatible Zn2+ sensing tool for conventional spectrofluorometers prepared by copolymerization of macrocyclic fluoroionophores on quartz glass surface
Sign Up to like & getrecommendations! Published in 2022 at "Methods and Applications in Fluorescence"
DOI: 10.1088/2050-6120/ac6ecb
Abstract: We report here the development of a surface-modified quartz glass sheet, which affords an opportunity for converting conventional spectrofluorometers to ion-selective optochemical sensors by placing it diagonally into a photometric cuvette. Moreover, we describe a… read more here.
Keywords: quartz glass; surface; conventional spectrofluorometers; cuvette ... See more keywords
Morphology of Blanks and Fiber of Quartz Glass
Sign Up to like & getrecommendations! Published in 2019 at "Glass Physics and Chemistry"
DOI: 10.1134/s1087659619060269
Abstract: The surface relief of blanks and silica glass fibers is studied by atomic force microscopy. The temperature change during free cooling is recorded using an infrared pyrometer. The results of the measurements of the roughness… read more here.
Keywords: morphology blanks; glass morphology; quartz glass; blanks fiber ... See more keywords
Numerical simulation of femtosecond laser ablation of quartz glass and silicon nitride.
Sign Up to like & getrecommendations! Published in 2022 at "Applied optics"
DOI: 10.1364/ao.464134
Abstract: The ablation threshold and depth models were established based on the electron density evolution equation of dielectric and ionization theory. The volume model was then deduced, and the models were validated. For quartz glass and… read more here.
Keywords: duration; quartz glass; silicon nitride; ablation ... See more keywords
Robust metallic micropatterns fabricated on quartz glass surfaces by femtosecond laser-induced selective metallization.
Sign Up to like & getrecommendations! Published in 2022 at "Optics express"
DOI: 10.1364/oe.456927
Abstract: Quartz glass has a wide range of application and commercial value due to its high light transmittance and stable chemical and physical properties. However, due to the difference in the characteristics of the material itself,… read more here.
Keywords: femtosecond laser; quartz glass; seed; glass ... See more keywords
Removal Mechanism of Oxide Layer on the Surface of Sn-0.4Ti Alloy for Quartz Glass Sealing
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13112620
Abstract: The oxide layer on the surface of Sn-0.4Ti alloy and its removal mechanism were investigated by coalitional analyses, using XPS and TEM technologies. The results show that a compact SnO1.65 oxide layer of less than… read more here.
Keywords: alloy quartz; surface 4ti; quartz glass; oxide layer ... See more keywords
Shear Thickening Polishing of Quartz Glass
Sign Up to like & getrecommendations! Published in 2021 at "Micromachines"
DOI: 10.3390/mi12080956
Abstract: Quartz glass is a typical optical material. In this research, colloidal silica (SiO2) and colloidal cerium oxide (CeO2) are used as abrasive grains to polish quartz glass in the shear thickening polishing (STP) process. The… read more here.
Keywords: glass; surface roughness; shear thickening; quartz glass ... See more keywords