Articles with "ray tomography" as a keyword



Photo from wikipedia

Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography

Sign Up to like & get
recommendations!
Published in 2019 at "Additive manufacturing"

DOI: 10.1016/j.addma.2019.100871

Abstract: Abstract This paper reports on X-ray tomography of a series of coupon samples (5 mm cubes) produced under different process parameters, for laser powder bed fusion of Ti6Al4V. Different process parameters result in different pore formation… read more here.

Keywords: powder bed; bed fusion; laser powder; process parameters ... See more keywords
Photo by neom from unsplash

X-ray tomography imaging of shale microstructures: A review in the context of multiscale correlative imaging

Sign Up to like & get
recommendations!
Published in 2020 at "International Journal of Coal Geology"

DOI: 10.1016/j.coal.2020.103641

Abstract: Abstract Shale microstructure determines hydrocarbon reserves and productivity. However, despite its high economic importance, the shale microstructure remains poorly understood. This is largely due to the complex pore space configuration in shale, and associated heterogeneity… read more here.

Keywords: multiscale correlative; shale microstructure; ray tomography; correlative imaging ... See more keywords
Photo by sharonmccutcheon from unsplash

Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography

Sign Up to like & get
recommendations!
Published in 2019 at "Composites Science and Technology"

DOI: 10.1016/j.compscitech.2019.01.018

Abstract: Abstract Biodegradable plant fiber reinforced poly (lactic acid) (PLA) composites are potential replacements for traditional synthetic fiber reinforced composites. These may experience hygrothermal aging from the combined effects of moisture and heat. The effects of… read more here.

Keywords: poly lactic; hygrothermal aging; acid pla; lactic acid ... See more keywords
Photo from wikipedia

In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PμSL) 3D printing technique: Defects characterization and in-situ shear test

Sign Up to like & get
recommendations!
Published in 2020 at "Composite Structures"

DOI: 10.1016/j.compstruct.2020.112710

Abstract: Abstract The robust mechanical properties of architected micro lattice mechanical metamaterials are determined by their precisely designed artificial microstructures, and various types of mechanical metamaterials have been proposed for acoustic manipulation, impact energy absorption, vibration… read more here.

Keywords: ray tomography; micro lattice; synchrotron ray; lattice ... See more keywords
Photo from wikipedia

High-efficiency techniques and micro-structural parameters to evaluate concrete self-healing using X-ray tomography and Mercury Intrusion Porosimetry: A review

Sign Up to like & get
recommendations!
Published in 2020 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2020.119030

Abstract: Abstract Researchers have put significant effort into developing various healing agents for micro-crack closure to achieve a more durable structure and various destructive and non-destructive test methods are often used for the evaluation of concrete… read more here.

Keywords: mercury intrusion; ray tomography; concrete self; self healing ... See more keywords
Photo from wikipedia

Microstructure imaging of Florentine stuccoes through X-ray tomography: A new insight on ancient plaster-making techniques

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Cultural Heritage"

DOI: 10.1016/j.culher.2019.05.013

Abstract: Abstract Gypsum-based plasters or stuccoes, in spite of their importance and diffusion, received little attention in cultural heritage materials studies. This work introduces a new, non-destructive methodology, using micro-tomography to measure the water/plaster ratio and… read more here.

Keywords: florentine stuccoes; imaging florentine; stuccoes ray; plaster ... See more keywords
Photo from wikipedia

Comparative study of ultrafast X-ray tomography and wire-mesh sensors for vertical gas–liquid pipe flows

Sign Up to like & get
recommendations!
Published in 2017 at "Flow Measurement and Instrumentation"

DOI: 10.1016/j.flowmeasinst.2016.02.001

Abstract: Abstract Wire-mesh sensors and ultrafast X-ray tomography were developed to investigate two-phase flows with high spatial and temporal resolution. In this study we present results of a comparative study for both imaging techniques, where disperse… read more here.

Keywords: mesh sensors; study; ultrafast ray; wire mesh ... See more keywords
Photo by kazuo513 from unsplash

Multi-scale 3D modelling of a DEMO prototype cable from strand to full-size conductor based on X-ray tomography and image analysis

Sign Up to like & get
recommendations!
Published in 2019 at "Fusion Engineering and Design"

DOI: 10.1016/j.fusengdes.2019.01.025

Abstract: Abstract The design of a superconducting magnet system of a fusion reactor candidate is usually based on the Cable in Conduit Conductor (CICC) concept. CICC consist of complex structures with several hundreds of highly packed,… read more here.

Keywords: strand; full size; size conductor; conductor ... See more keywords
Photo from wikipedia

A combined experimental-numerical lamellar-scale approach of tensile rupture in arterial medial tissue using X-ray tomography.

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of the mechanical behavior of biomedical materials"

DOI: 10.1016/j.jmbbm.2019.03.028

Abstract: Aortic dissection represents a serious cardio-vascular disease and life-threatening event. Dissection is a sudden delamination event of the wall, possibly leading to rupture within a few hours. Current knowledge and practical criteria to understand and… read more here.

Keywords: delamination; rupture; model; lamellar scale ... See more keywords
Photo from wikipedia

Study of scratch resistance of a hard-on-soft polymer bilayer: Combination of in situ vision, X-ray tomography and numerical simulations

Sign Up to like & get
recommendations!
Published in 2020 at "Wear"

DOI: 10.1016/j.wear.2020.203271

Abstract: Abstract The deposition of a hard coating is a commonly used solution to increase the scratch resistance of soft polymeric materials at low and moderate normal loads. But the major risk for a coating subjected… read more here.

Keywords: scratch; ray tomography; scratch resistance;
Photo by testalizeme from unsplash

PSF Corrected Reconstruction in Soft X-ray Tomography (SXT)

Sign Up to like & get
recommendations!
Published in 2017 at "Microscopy and Microanalysis"

DOI: 10.1017/s1431927617005554

Abstract: Soft x-ray tomography (SXT) refers to the x-ray microscopy technique in which tomographic imaging is done using low-energy x-rays. In particular, the energy range of the photons lie within the “water window”, i.e., between the… read more here.

Keywords: microscopy; soft ray; ray tomography; ray ... See more keywords