Phase Formation During Reactive Sintering of the B4C–SiC–Si(Al) Composite (Review)
Sign Up to like & getrecommendations! Published in 2018 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-018-0165-9
Abstract: Phase formation was regarded during the reactive sintering of boron carbide materials in the presence of silicon or aluminum, or silicon-aluminum melts. The inter-phase interaction was investigated, the melting (decomposition) temperatures as well as crystallographic… read more here.
Keywords: phase formation; phase; formation reactive; reactive sintering ... See more keywords
SiC nanowire-induced fabrication of fine-grained and highly-density SiC coating by pressure-less reactive sintering
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.001
Abstract: Abstract Fine-grained and high-density SiC coating was fabricated on carbon materials by incorporating SiC nanowires during the pressure-less reactive sintering for the first time. The grain size, relative density, and fracture toughness of the as-fabricated… read more here.
Keywords: pressure less; reactive sintering; density sic; fine grained ... See more keywords
A low-cost approach to fabricate SiC nanosheets by reactive sintering from Si powders and graphite
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.02.179
Abstract: Abstracts Silicon carbide (SiC) nanosheet with 2D micro-morphology was fabricated by reactive sintering method and a two-step sintering process. The effect of molar ratio of C and Si (from 1/1 to 4/1) on the phase… read more here.
Keywords: sic nanosheets; molar ratio; reactive sintering; low cost ... See more keywords
Reactive sintering behavior and enhanced densification of (Ti,Zr)B2–(Zr,Ti)C composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.05.037
Abstract: Abstract Reactive hot pressing was used to prepare (Ti,Zr)B2–(Zr,Ti)C composites from equimolar ZrB2 and TiC powders. The reaction and solid-solution coupling effect and enhanced densification in ZrB2-50 mol.% TiC were proposed as contrasted to conventional consolidation… read more here.
Keywords: composites reactive; densification; reactive sintering; sintering behavior ... See more keywords
Synthesis and characterization of Ni-Cu-Zn ferrites by microwave reactive sintering technique
Sign Up to like & getrecommendations! Published in 2017 at "Integrated Ferroelectrics"
DOI: 10.1080/10584587.2017.1369309
Abstract: ABSTRACT Ni0.3Cu0.08Zn0.62Fe2O4 (NCZF) ceramics were prepared by solid state reaction route and calcined at temperatures at (i) 600°C for 30 minutes and (ii) 900°C for 15 minutes in microwave furnace. Room temperature X-ray diffraction analysis… read more here.
Keywords: characterization ferrites; reactive sintering; ferrites microwave; microwave reactive ... See more keywords
Reactive sintering of B4c-TiB2 composites from B4 and TiO2 precursors
Sign Up to like & getrecommendations! Published in 2020 at "Processing and Application of Ceramics"
DOI: 10.2298/pac2004329s
Abstract: The effect of sintering temperature in the interval from 1775 to 1850°C on the density, microstructure, hardness and fracture toughness of ceramic composites consisting of a boron carbide matrix and titanium diboride secondary phase was… read more here.
Keywords: tib2 composites; b4c tib2; reactive sintering; sintering temperature ... See more keywords