Microstructural characterization of an α+β type Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy during recrystallization annealing
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.02.132
Abstract: Abstract An α + β type titanium alloy was subjected to various periods of recrystallization annealing and the resulting microstructural evolution was characterized. The results revealed that the recrystallization rate of the β phase was… read more here.
Keywords: recrystallization; phase; recrystallization annealing; alloy ... See more keywords
Fine-grained processing and electron backscatter diffraction (EBSD) analysis of cold-rolled Inconel 617
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.05.193
Abstract: Abstract Fine-grained processing of Inconel 617 sheet was proposed, and microstructural evolution during processing was analyzed. The optimum recovery temperature at 750 °C and the best recrystallization annealing temperature at 1000 °C were determined by experiments. The… read more here.
Keywords: sheet; recrystallization annealing; inconel 617; grained processing ... See more keywords
Microstructure evolution of Al–Cu–Mg alloy during rapid cold punching and recrystallization annealing
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(19)65089-2
Abstract: Abstract The microstructure evolution of spray formed and rapidly solidified Al−Cu−Mg alloy with fine grains during rapid cold punching and recrystallization annealing was investigated by transmission electron microscopy (TEM). The results show that the precipitates… read more here.
Keywords: recrystallization; rapid cold; recrystallization annealing; alloy ... See more keywords
Ultrasonic Assessment of the Influence of Cold Rolling and Recrystallization Annealing on the Elastic Constants in a TWIP Steel
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14216559
Abstract: The evolution of the elastic constants, C33, C44 and C55, Poisson’s ratio and acoustic birefringence of a Fe-0.5 wt% C-21.5 wt% Mn twinning-induced plasticity (TWIP) steel with reduction by cold rolling and recrystallization annealing was… read more here.
Keywords: recrystallization; recrystallization annealing; elastic constants; cold rolling ... See more keywords