Synthesis and analysis of nanocrystalline β1-Cu3Al and β2-NiAl intermetallic-reinforced aluminum matrix composite by high energy ball milling
Sign Up to like & getrecommendations! Published in 2017 at "Metals and Materials International"
DOI: 10.1007/s12540-017-6449-7
Abstract: Nanocrystalline β1-Cu3Al and β2-NiAl intermetallic compounds were in-situ reinforced in the aluminum matrix with the atomic composition of Al67Cu20Ni13 by the mechanical alloying of elemental powders. Both β1-Cu3Al, β2-NiAl phases that can be only co-synthesized… read more here.
Keywords: reinforced aluminum; matrix; aluminum matrix; nanocrystalline cu3al ... See more keywords
Comparative Study on Microstructural Characteristics and Compression Deformation Behaviour of Alumina and Cenosphere Reinforced Aluminum Syntactic Foam Made Through Stir Casting Technique
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-017-1211-x
Abstract: In order to examine the effect of microballoons type on microstructure and compressive deformation behaviour of aluminum syntactic foam, alumina reinforced and cenosphere reinforced aluminum syntactic foams have been made through stir-casting technique. Alumina microballoons… read more here.
Keywords: reinforced aluminum; syntactic foam; aluminum syntactic; aluminum ... See more keywords
A bridging cell multiscale modeling of carbon nanotube-reinforced aluminum nanocomposites
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.02.044
Abstract: Abstract In this paper, the Young’s modulus and failure mechanics of nanotube-reinforced aluminum nanocomposites has been investigated using the Bridging Cell Method (BCM). The advantage of the BCM for multiscale modeling of CNT-Al nanocomposites is… read more here.
Keywords: reinforced aluminum; bridging cell; aluminum nanocomposites; nanotube reinforced ... See more keywords
Preparation and properties of in-situ mullite whiskers reinforced aluminum chromium phosphate wave-transparent ceramics
Sign Up to like & getrecommendations! Published in 2017 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2017.05.055
Abstract: Abstract In-situ mullite whisker reinforced aluminum chromium phosphate wave-transparent ceramics were designed and prepared. The phase transformation, microstructure, mechanical and electrical properties of the ceramics were investigated, and the mechanisms of in-situ growth and toughening… read more here.
Keywords: aluminum chromium; reinforced aluminum; situ mullite; phosphate wave ... See more keywords
In situ synthesized nano-Al4C3 reinforced aluminum matrix composites via friction stir processing
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.07.109
Abstract: Abstract The strength-ductility trade-off problem of carbon nanotube (CNT) reinforced aluminum matrix nanocomposites (AMNCs) restricts its further application. Hence, we report the fabrication of nano-Al4C3 reinforced AMNCs through friction stir processing (FSP) on CNT/Al composites… read more here.
Keywords: al4c3; nano al4c3; reinforced aluminum; aluminum matrix ... See more keywords
Investigation on forming limit of carbon nanotube reinforced aluminum matrix composite sheet at high temperature
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.08.111
Abstract: Abstract The thermal forming limit curve of carbon nanotube reinforced aluminum matrix composite (CNT/2009Al) was theoretically and experimentally investigated in this work. The mathematical procedure was solved on basis of Marciniak-Kuczynski model by applying the… read more here.
Keywords: reinforced aluminum; carbon nanotube; nanotube reinforced; aluminum matrix ... See more keywords
Tribological properties of B4C reinforced aluminum composite coating produced by TIG re-melting of flame sprayed Al-Mg-B4C powder
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.06.040
Abstract: Abstract Producing a high-performance surface composite layer under severe tribological conditions such as wear was main purpose of this investigation. In this regard, B4C submicron-sized particles were chosen as reinforcement to increase tribological properties of… read more here.
Keywords: tribological properties; reinforced aluminum; composite coating; properties b4c ... See more keywords
Investigation of Surface Roughness and Material Removal Rate on Machining of TIB2 Reinforced Aluminum 6063 Composites: A Taguchi’s Approach
Sign Up to like & getrecommendations! Published in 2018 at "Mechanics and Mechanical Engineering"
DOI: 10.2478/mme-2018-0102
Abstract: Abstract The utilization of TiB2 particles reinforced aluminum (Al6063) metal matrix composite materials in many different engineering fields has undergone a tremendous increase. Accordingly, the need of accurate machining of composites has increased enormously; an… read more here.
Keywords: reinforced aluminum; roughness material; surface roughness; material removal ... See more keywords
Dimensional Stability of Mirror Substrates Made of Silicon Particle Reinforced Aluminum
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15092998
Abstract: In the present study, the thermal cycling stability of mirrors made of silicon particle reinforced aluminum compounds, containing an amount of 42 ± 2 wt.% silicon particles, is investigated with respect to thermal loading. The… read more here.
Keywords: particle reinforced; reinforced aluminum; silicon particle; made silicon ... See more keywords