Enhancement in Mechanical, Thermal, and Dielectric Properties of Functionalized Graphene Oxide Reinforced Epoxy Composites
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21702
Abstract: The present work has the objective of fabricating graphene oxide (GO) and amine-functionalized graphene oxide (F-GO) reinforced epoxy composites using the casting method. Epoxy resin was dispersed separately with GO (0.5 wt%) and F-GO (0.5… read more here.
Keywords: graphene oxide; mechanical thermal; functionalized graphene; oxide reinforced ... See more keywords
Microwave Non-destructive Evaluation of Glass Reinforced Epoxy and High Density Polyethylene Pipes
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Nondestructive Evaluation"
DOI: 10.1007/s10921-020-00669-2
Abstract: Owing to their inherent advantages, non-metallic structures such as glass reinforced epoxy (GRE) pipes and high-density polyethylene (HDPE) pipes are rapidly replacing their steel counterparts in pipeline infrastructures. However, non-metallic pipes are vulnerable to a… read more here.
Keywords: non metallic; high density; glass reinforced; non destructive ... See more keywords
Friction and Wear Behavior of Carbon Fabric-Reinforced Epoxy Composites
Sign Up to like & getrecommendations! Published in 2017 at "JOM"
DOI: 10.1007/s11837-017-2273-2
Abstract: Abstract Besides intrinsic material properties, weight/energy savings and wear performance play an important role in the selection of materials for any engineering application. The tribological behavior of carbon fabric-reinforced epoxy composites produced by molding technique… read more here.
Keywords: reinforced epoxy; fabric reinforced; behavior carbon; carbon fabric ... See more keywords
Understanding interfacial interaction characteristics of carbon nitride reinforced epoxy composites from atomistic insights
Sign Up to like & getrecommendations! Published in 2021 at "Carbon"
DOI: 10.1016/j.carbon.2020.08.067
Abstract: Abstract Two-dimensional carbon nitride (C3N) is a promising alternative to graphene (GN) as the reinforcement in epoxy composites, yet the complicated interfacial interactions have not been fully understood, which restricts the application of using C3N… read more here.
Keywords: interfacial interaction; carbon nitride; epoxy composites; c3n ... See more keywords
Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization
Sign Up to like & getrecommendations! Published in 2018 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.02.026
Abstract: Abstract The mechanical and electrochemical behavior of ultrasonic spot welded hybrid joints, made of AA5754 aluminum and carbon fiber reinforced epoxy with a co-cured thermoplastic surface layer, was studied. The effect of the welding parameters… read more here.
Keywords: carbon fiber; carbon; mechanical electrochemical; fiber reinforced ... See more keywords
Enhancement of interlaminar fracture toughness in textile-reinforced epoxy composites with polyamide 6/graphene oxide interlaminar toughening tackifier
Sign Up to like & getrecommendations! Published in 2020 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2020.108094
Abstract: Abstract Although widely used in aviation and aerospace engineering over the last several decades, textile-reinforced epoxy composites always suffer from their relatively poor out-of-plane properties, due to the inherent brittleness of epoxy matrix. In this… read more here.
Keywords: interlaminar toughening; interlaminar; textile reinforced; textile ... See more keywords
Effect of thermal ageing on the scratch resistance of natural-fibre-reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.113586
Abstract: Abstract In this study, the effects of thermal ageing on the scratch-resistance properties of natural-fibre-reinforced epoxy composites were investigated. Jute, kenaf and hemp-fibre-reinforced epoxy composites were fabricated using the vacuum infusion method. The natural-fibre-reinforced composites… read more here.
Keywords: reinforced epoxy; thermal ageing; scratch; epoxy composites ... See more keywords
Cyclodextrin as sizing for carbon fibers: new bonding mechanism improves adhesion in carbon fiber reinforced epoxy resin
Sign Up to like & getrecommendations! Published in 2020 at "Heliyon"
DOI: 10.1016/j.heliyon.2020.e03766
Abstract: In this study, β-cyclodextrin was covalently bonded on carbon fibers and its influence through host-guest complex formation was analyzed. Since cyclodextrins act as host molecules for aromatic compounds, complex formations can be performed in carbon… read more here.
Keywords: carbon fiber; carbon; carbon fibers; fiber reinforced ... See more keywords
Physical, tribological and viscoelastic behavior of machining wear debris powder reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.122786
Abstract: Abstract In the field of construction and building materials, many researchers have demonstrated the utilization of fly ash in polymer composites. In a similar way, the present study also focuses on the utilization of machining… read more here.
Keywords: physical tribological; wear debris; epoxy composites; wedm wear ... See more keywords
Processing and characterization of Arapaima gigas scales and their reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.01.051
Abstract: Abstract The arapaima is a large Amazonian freshwater fish and an example of a natural protective system against predators such as the piranha fish. In this work, both the plain scales and a 30 vol%… read more here.
Keywords: arapaima; scales reinforced; spectroscopy; arapaima scales ... See more keywords
Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.05.111
Abstract: Abstract 3-D E-glass fabric reinforced epoxy composites at 6 mm thickness were fabricated for various orientations of the binder yarn viz. 0°, 30°, 45°, 60° and 90° respectively. Tensile, flexural, interlaminar shear stress tests were conducted… read more here.
Keywords: compression factor; reinforced epoxy; mechanical properties; orientation ... See more keywords