Geometry and Topology Optimization of Switched Reluctance Machines: A Review
Sign Up to like & getrecommendations! Published in 2022 at "IEEE Access"
DOI: 10.1109/access.2022.3140440
Abstract: Switched reluctance machines (SRMs) have recently attracted more interest in many applications due to the volatile prices of rare-earth permanent magnets (PMs) used in permanent magnet synchronous machines (PMSMs). They also have rugged construction and… read more here.
Keywords: topology; topology optimization; switched reluctance; reluctance machines ... See more keywords
Performance Comparison of Short-Pitched and Fully Pitched Switched Reluctance Machines Over Wide Speed Operations
Sign Up to like & getrecommendations! Published in 2018 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/tia.2018.2839627
Abstract: This paper presents a comprehensive comparison of switched reluctance machines (SRMs) with short-pitched and fully pitched windings for the same machine geometry. An SRM designed for off-road vehicles with short-pitched windings is rewound with full-pitched… read more here.
Keywords: comparison; pitched fully; reluctance machines; short pitched ... See more keywords
An Enhanced Analytical Calculation of the Phase Inductance of Switched Reluctance Machines
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Industry Applications"
DOI: 10.1109/tia.2018.2879303
Abstract: Accurate prediction of the phase inductance of switched reluctance machines (SRMs) is of crucial importance at the design stage because it is a key parameter to estimate the performance indices, such as the torque and… read more here.
Keywords: phase inductance; reluctance machines; switched reluctance; inductance switched ... See more keywords
Analytical Prediction of Torque of Switched Reluctance Machines Considering Nonlinear Characteristics
Sign Up to like & getrecommendations! Published in 2022 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2021.3051547
Abstract: In this paper, an analytical method (AM) based on the air-gap magnetomotive force (MMF) permeance model is proposed to predict the nonlinear instantaneous torque of switched reluctance machines (SRMs). The analytical expression of the air-gap… read more here.
Keywords: air gap; switched reluctance; nonlinear characteristics; reluctance machines ... See more keywords
Inter-Turn Short-Circuit Faults Diagnosis in Synchronous Reluctance Machines, Using the Luenberger State Observer and Current's Second-Order Harmonic
Sign Up to like & getrecommendations! Published in 2022 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2021.3109514
Abstract: Interturn short-circuit faults are one of the most (if not the most) harmful electrical machine failures, that if not detected and mitigated at a very incipient stage of development may involve serious consequences, both in… read more here.
Keywords: luenberger state; short circuit; reluctance machines; circuit faults ... See more keywords
Novel Harmonic Current Controller for DC-Biased Vernier Reluctance Machines Based on Virtual Winding
Sign Up to like & getrecommendations! Published in 2023 at "IEEE Transactions on Industrial Electronics"
DOI: 10.1109/tie.2022.3215830
Abstract: Direct current-biased Vernier reluctance machine (dc-biased VRM) adopts a doubly salient structure and sinusoidal phase currents. It has better performance than switched reluctance machines and variable flux reluctance machines. The back electromotive force waveforms of… read more here.
Keywords: reluctance machines; virtual winding; harmonics; based virtual ... See more keywords
Torque Ripple Reduction for 12-Stator/10-Rotor-Pole Variable Flux Reluctance Machines by Rotor Skewing or Rotor Teeth Non-Uniformity
Sign Up to like & getrecommendations! Published in 2017 at "IEEE Transactions on Magnetics"
DOI: 10.1109/tmag.2017.2712609
Abstract: Variable flux reluctance machines (VFRMs) are interesting candidates to substitute permanent-magnet synchronous machines in many applications. However, they suffer from large torque ripple. In this paper two methods, stepped rotor skewing and rotor teeth non-uniformity,… read more here.
Keywords: flux reluctance; rotor skewing; torque ripple; rotor ... See more keywords
Investigation on Contribution of Inductance Harmonics to Torque Production in Multiphase Doubly Salient Synchronous Reluctance Machines
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Magnetics"
DOI: 10.1109/tmag.2019.2899803
Abstract: This paper investigates the contribution of each order inductance harmonic to the torque (both average torque and torque ripple) of multiphase doubly salient synchronous reluctance machines (DS-SRMs). Such machines are similar to switched reluctance machines… read more here.
Keywords: reluctance machines; torque; harmonics; torque ripple ... See more keywords
Analysis of DC-Biased Vernier Reluctance Machines Having Distributed Windings
Sign Up to like & getrecommendations! Published in 2021 at "IEEE Transactions on Magnetics"
DOI: 10.1109/tmag.2021.3074935
Abstract: This article analyses the electromagnetic performance of dc-biased current vernier reluctance machines (DCB-VRMs) with distributed windings. Taking example of 12-stator slot machines, the coil connection and current configuration are illustrated. Moreover, the back electromotive force… read more here.
Keywords: distributed windings; reluctance machines; vernier reluctance; analysis biased ... See more keywords
Hierarchical Distributed Motion Control for Multiple Linear Switched Reluctance Machines
Sign Up to like & getrecommendations! Published in 2017 at "Energies"
DOI: 10.20944/preprints201706.0066.v1
Abstract: This paper investigates a distributed, coordinated motion control network based on multiple direct-drive, linear switched reluctance machines (LSRMs). A hierarchical, two-level synchronization control strategy is proposed for the four LSRMs based motion control network. The… read more here.
Keywords: motion control; control; linear switched; reluctance machines ... See more keywords
Recent Trends in Additive Manufacturing and Topology Optimization of Reluctance Machines
Sign Up to like & getrecommendations! Published in 2023 at "Energies"
DOI: 10.3390/en16093840
Abstract: Additive manufacturing (AM) or 3D printing has opened up new opportunities for researchers in the field of electrical machines, as it allows for more flexibility in design and faster prototyping, which can lead to more… read more here.
Keywords: topology; topology optimization; reluctance machines; design ... See more keywords