The role of pore structure and nitrogen surface groups in the adsorption behavior of formaldehyde on resin‐based carbons
Sign Up to like & getrecommendations! Published in 2020 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6920
Abstract: This study focused on the role of pore structures and nitrogen surface functional groups in the formaldehyde (HCHO) adsorption on the carbonized resin‐based materials (UFC). After comparing the optimal sample UFAC‐700 obtained by the activation… read more here.
Keywords: nitrogen surface; resin based; pore; role pore ... See more keywords
Polymerization pattern characterization within a resin-based composite cured using different curing units at two distances
Sign Up to like & getrecommendations! Published in 2019 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-019-02831-1
Abstract: ObjectivesTo investigate the relationship of the irradiance-beam-profile areas from six different light-curing units (LCUs) with the degree of conversion (DC), microhardness (KH), and cross-link density (CLD) throughout a resin-based composite (RBC) cured at two clinically… read more here.
Keywords: irradiance; resin based; polymerization; based composite ... See more keywords
Synthesis, characterization and evaluation of resin-based carbon spheres modified by oxygen functional groups for gaseous elemental mercury capture
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2231-6
Abstract: A novel resin-based spherical carbon material was successfully prepared by suspension polymerization of alkyl phenol and formaldehyde and steam activation in combination with surface modification by heat treatment with dry air for enhancing Hg0 adsorption.… read more here.
Keywords: adsorption; resin based; carbon spheres; carbon ... See more keywords
VOCs adsorption of resin-based activated carbon and bamboo char: Porous characterization and nitrogen-doped effect
Sign Up to like & getrecommendations! Published in 2020 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2020.124983
Abstract: Abstract The objective of this study was to assess the VOCs (methanol and toluene) adsorption capacity of doped porous carbon materials (resin-based carbon and bamboo char) by experiments and theoretical calculations. Results showed N-doped porous… read more here.
Keywords: adsorption; resin based; carbon; carbon bamboo ... See more keywords
Degradation of optical and surface properties of resin-based composites with distinct nanoparticle sizes but equivalent surface area.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of dentistry"
DOI: 10.1016/j.jdent.2017.02.008
Abstract: OBJECTIVE To determine the optical and surface properties of model resin-based composites made with distinct nanoparticle sizes but equalized surface area, among them, before and after ageing. METHODS Model resin-based composites based on BisGMA/TEGDMA (50:50mol%)… read more here.
Keywords: resin based; surface area; surface; surface properties ... See more keywords
The Effects of Nanofilled Resin-based Coatings on the Physical Properties of Glass Ionomer Cement Restorative Materials.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of dentistry"
DOI: 10.1016/j.jdent.2019.07.015
Abstract: OBJECTIVES To determine the effect of two resin-based coatings on the water sorption/solubility and colour change of three conventional and two resin modified glass ionomer cement restorative materials. METHODS Five glass-ionomer cement (GIC) restorative materials… read more here.
Keywords: water; resin based; sorption solubility;
In situ measurement of dental resin-based composite volumetric shrinkage and temperature effects using in-fibre bragg grating methods.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2019.03.026
Abstract: OBJECTIVES Resin-based composites (RBCs) are commonly used in dental restorations. It is known that RBCs undergo volumetric shrinkage during photo-polymerization leading to a detrimental increased stress state at the RBC-tooth interface and potentially early restoration… read more here.
Keywords: resin based; temperature; fbgs; shrinkage ... See more keywords
Long-term creep behavior of resin-based polymers in the construction industry
Sign Up to like & getrecommendations! Published in 2019 at "Materials Today Communications"
DOI: 10.1016/j.mtcomm.2018.11.006
Abstract: Abstract For lifetime assessment of resin-based injection mortar systems in structural applications, a fundamental knowledge of the long-term deformation and failure behavior of such materials is required. This research work addresses the long-term deformation behavior… read more here.
Keywords: bound; reference; resin based; creep modulus ... See more keywords
Frictional behavior of resin-based brake composites: Effect of carbon fibre reinforcement
Sign Up to like & getrecommendations! Published in 2019 at "Wear"
DOI: 10.1016/j.wear.2018.12.098
Abstract: Abstract To investigate the effect of short carbon fibre on the tribological behavior of phenolic resin-based friction materials, a reference friction composite holding various ingredients without short carbon fibre, and three friction composites holding 1,… read more here.
Keywords: carbon fibre; resin based; friction; behavior ... See more keywords
A self-assembled silicon/phenolic resin-based carbon core–shell nanocomposite as an anode material for lithium-ion batteries
Sign Up to like & getrecommendations! Published in 2018 at "RSC Advances"
DOI: 10.1039/c7ra13580g
Abstract: Silicon, with advantages such as high theoretical capacity and relatively low working potential, has been regarded as promising when it is used for lithium-ion battery anodes. However, its practical application is impeded by the intrinsic… read more here.
Keywords: resin based; carbon; phenolic resin; shell ... See more keywords
Performance of Rigid and Soft Transfer Templates Using Viscous and Fluid Resin-Based Composites in the Attachment Bonding Process of Clear Aligners
Sign Up to like & getrecommendations! Published in 2022 at "International Journal of Dentistry"
DOI: 10.1155/2022/1637594
Abstract: Objectives The study aims at assessing the accuracy of the process of attachment bonding in aligner treatments. The analysis leads to the error estimation in the faithful reproduction of master model attachments using two types… read more here.
Keywords: based composites; transfer templates; resin based; error ... See more keywords