Articles with "rfid tags" as a keyword



Photo by clemono from unsplash

Self-powered smart active RFID tag integrated with wearable hybrid nanogenerator

Sign Up to like & get
recommendations!
Published in 2019 at "Nano Energy"

DOI: 10.1016/j.nanoen.2019.103911

Abstract: Abstract Radio frequency identification (RFID) technology is essential to construct the Internet of Things (IoT), which is significant to promote the blooming development of the new-generation information technology. RFID tags are widely used in many… read more here.

Keywords: rfid; rfid tag; active rfid; rfid tags ... See more keywords
Photo by fonsheijnsbroek_amsterdam_photos from unsplash

Design and Analysis of Chipless RFID Tags Based on Retro-Radiators

Sign Up to like & get
recommendations!
Published in 2019 at "IEEE Access"

DOI: 10.1109/access.2019.2946614

Abstract: Chipless RFID tag is a promising technique for future RFID systems due to its low cost and high reliability. In this paper, three chipless RFID tags are designed based on retro-reflective structures, in order to… read more here.

Keywords: rfid; chipless; rfid tags; chipless rfid ... See more keywords
Photo by lureofadventure from unsplash

Single-Layer, Flexible, and Depolarizing Chipless RFID Tags

Sign Up to like & get
recommendations!
Published in 2020 at "IEEE Access"

DOI: 10.1109/access.2020.2988116

Abstract: This work presents the designs of single-layer chipless radio frequency identification (RFID) tags based on the RF-encoding particles (REP) approach. These tags are the first realized for reading in cross-polarization resulting in a higher immunity… read more here.

Keywords: chipless; rfid tags; low cost; layer ... See more keywords
Photo by intenzafitness from unsplash

Fast Counterfeit RFID Tags Detection With Slot Constraints

Sign Up to like & get
recommendations!
Published in 2023 at "IEEE Access"

DOI: 10.1109/access.2023.3269571

Abstract: RFID tags are prone to counterfeit attacks in supply chain scenarios. The attacker often uses counterfeit tags to replace stolen tags to avoid being detected by the inventory process. To defend against such attacks, existing… read more here.

Keywords: rfid tags; slot; fast counterfeit; detection ... See more keywords
Photo by thinkmagically from unsplash

Spatial Signal Attenuation Model of Active RFID Tags

Sign Up to like & get
recommendations!
Published in 2018 at "IEEE Access"

DOI: 10.1109/ispan-fcst-iscc.2017.51

Abstract: How to improve localization accuracy is a big challenge for highly dynamic and sparse industrial scenarios with active RFID tags. Since antenna of active tag is anisotropic, its emitting signal propagates damply with transmission distance… read more here.

Keywords: rfid tags; signal attenuation; model; attenuation ... See more keywords
Photo by martindorsch from unsplash

Long-Range Miniaturized Ceramic RFID Tags

Sign Up to like & get
recommendations!
Published in 2021 at "IEEE Transactions on Antennas and Propagation"

DOI: 10.1109/tap.2020.3037663

Abstract: Radio frequency identification (RFID) is a mature technology that allows contactless reading of data via a wireless communication link. While communication protocols in this field are subject to international regulations, there are plenty of opportunities… read more here.

Keywords: rfid; high permittivity; rfid tags; range ... See more keywords
Photo by thanti_riess from unsplash

Analysis on Polarization Responses of Resonators for Frequency-Coded Chipless RFID Tags

Sign Up to like & get
recommendations!
Published in 2022 at "IEEE Transactions on Antennas and Propagation"

DOI: 10.1109/tap.2021.3111526

Abstract: This article presents a method to analyze co- and cross-polarized responses of the resonators exploited in the development of frequency-coded chipless radio frequency identification (RFID) tags. The method uses the complex radar cross Section (RCS)… read more here.

Keywords: rfid tags; cross polarized; coded chipless; frequency ... See more keywords
Photo by fonsheijnsbroek_amsterdam_photos from unsplash

Robust Spinning Sensing with Dual-RFID-Tags in Noisy Settings

Sign Up to like & get
recommendations!
Published in 2019 at "IEEE Transactions on Mobile Computing"

DOI: 10.1109/tmc.2018.2877985

Abstract: Conventional spinning inspection systems, equipped with separated sensors (e.g., accelerometer, laser, etc.) and communication modules, are either very expensive and/or suffering from occlusion and narrow field of view. The recently proposed RFID-based sensing solution draws… read more here.

Keywords: rfid; noisy settings; rfid tags; dual rfid ... See more keywords
Photo by nate_dumlao from unsplash

ShopSense:Customer Localization in Multi-Person Scenario With Passive RFID Tags

Sign Up to like & get
recommendations!
Published in 2022 at "IEEE Transactions on Mobile Computing"

DOI: 10.1109/tmc.2020.3029833

Abstract: Indoor localization serves as the basis of sensing and understanding human behaviors and further providing personalized services in many scenarios, such as retail stores, warehouses and libraries. However, existing indoor localization technologies cannot fulfill the… read more here.

Keywords: rfid tags; customer localization; localization; shopsense customer ... See more keywords
Photo from academic.microsoft.com

Passive UHF RFID Tags with Specific Printed Antennas for Dielectric and Metallic Objects Applications

Sign Up to like & get
recommendations!
Published in 2017 at "Radioengineering"

DOI: 10.13164/re.2017.0735

Abstract: Design process and respective results for the synthesis of specific Radiofrequency Identification (RFID) tag antennas, suitable for dielectric and metallic objects, are presented. The antennas were designed for the UHF (865 MHz-869 MHz) band and… read more here.

Keywords: uhf rfid; rfid tags; metallic objects; dielectric metallic ... See more keywords
Photo from wikipedia

Marking Standing Trees with RFID Tags

Sign Up to like & get
recommendations!
Published in 2020 at "Forests"

DOI: 10.3390/f11020150

Abstract: Precision forestry and traceability services for the certification of timber products require reliable systems for the identification of items throughout the supply chains, starting from the inventory of standing trees. AutoID systems based on radio… read more here.

Keywords: capacity; rfid tags; trees rfid; marking standing ... See more keywords