Effects of annealing temperature on the interfacial microstructure and bonding strength of Cu/Al clad sheets produced by twin-roll casting and rolling
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2020.116804
Abstract: Abstract In this paper, Cu/Al clad sheets were prepared by twin-roll casting and multi-pass cold rolling. Annealing treatment was performed at temperatures of 250 °C, 300 °C, 350 °C and 400 °C, separately. The influences of the annealing temperature… read more here.
Keywords: strength; roll casting; twin roll; clad sheets ... See more keywords
Two-phase viscoplastic model for the simulation of twin roll casting
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2020.116814
Abstract: Abstract A two-phase Eulerian-Eulerian volume-averaged model was used to predict the outcome of the twin-roll casting process for inoculated Al-4 wt.% Cu alloys. The model is able to address the deformation of the mush during hot… read more here.
Keywords: twin roll; model; roll casting; two phase ... See more keywords
Effects of annealing on bonding strengthening mechanism of TFi/Al composite sheets by twin-roll casting with roller vibration
Sign Up to like & getrecommendations! Published in 2023 at "Journal of Materials Research"
DOI: 10.1557/s43578-023-00988-w
Abstract: An innovative twin-roll casting process that produces the comprehensive effect of “energy field agitation + dendrite breaking + asymmetric rolling” by vibration of the roller was used for preparation of Ti/Al composite sheets. The increase of meshing layer thickness… read more here.
Keywords: composite sheets; twin roll; roll casting; roller ... See more keywords
Numerical Simulation of Thermal Field of Work Roll during Top Side-pouring Twin-roll Casting of Steel
Sign Up to like & getrecommendations! Published in 2017 at "Isij International"
DOI: 10.2355/isijinternational.isijint-2017-191
Abstract: By merging the process of casting and rolling,1) twin-roll strip casting (TRC) has been proved to be an efficient and energy-saving technology.2) There are mainly two types of TRC, vertical and horizontal. However, both types… read more here.
Keywords: top side; roll casting; roll; pouring twin ... See more keywords
In vivo degradation and bone reaction of long-term fixation with a magnesium alloy made by twin-roll casting in a rat femur model.
Sign Up to like & getrecommendations! Published in 2022 at "Bio-medical materials and engineering"
DOI: 10.3233/bme-221415
Abstract: BACKGROUND The effect of casting parameters on the microstructure and corrosion resistance of Mg alloys is still limited, especially in clinical animal experiments. OBJECTIVE We prepared a new magnesium rare earth alloy (Mg-Re, where Re… read more here.
Keywords: magnesium; bone; roll casting; bone reaction ... See more keywords
Twin Roll Casting and Secondary Cooling of 6.0 wt.% Silicon Steel
Sign Up to like & getrecommendations! Published in 2021 at "Metals"
DOI: 10.3390/met11101508
Abstract: Iron–silicon alloys with up to 6.5 wt.% Si offer an improvement of soft magnetic properties in electrical steels compared to conventional electrical steel grades. However, steels with high Si contents are very brittle and cannot… read more here.
Keywords: roll casting; twin roll; secondary cooling; cooling strategies ... See more keywords
Roll Casting of Al-40%Sn-1%Cu Strip
Sign Up to like & getrecommendations! Published in 2018 at "Defect and Diffusion Forum"
DOI: 10.4028/www.scientific.net/ddf.382.147
Abstract: Strip casting of Al-40%Sn-1%Cu, which is an aluminum alloy used for sliding bearings, was attempted using an unequal diameter twin roll caster. The conditions required to cast sound strips, including the roll speed, molten temperature,… read more here.
Keywords: roll casting; roll; strip; solidification ... See more keywords