Influence of Rolling Reduction on Secondary Recrystallization and Magnetic Properties in Strip‐Cast Grain‐Oriented 4.5%Si Steel
Sign Up to like & getrecommendations! Published in 2017 at "Steel Research International"
DOI: 10.1002/srin.201600255
Abstract: Grain-oriented 4.5%Si steel is processed by strip casting and two-stage rolling with second rolling reduction varied from 53.3 to 82.7%. The microstructure and texture evolution are studied with emphasis on the effect of second rolling… read more here.
Keywords: reduction; rolling reduction; magnetic properties; grain oriented ... See more keywords
Effect of Hot Rolling Reduction on Dynamic Recrystallization of Nb–V Bearing HSLA Steel: Physical Simulation and Microtexture Evolution
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02097-2
Abstract: In the present study, the effect of hot rolling reduction ratio on dynamic recrystallization (DRX) of Nb–V bearing high-strength low-alloy (HSLA) steel was investigated. The hot rolling process was simulated physically by performing single- and… read more here.
Keywords: recrystallization; reduction; rolling reduction; hot rolling ... See more keywords
Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Friction Stir-Welded AZ31 Magnesium Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-018-0725-5
Abstract: The as-rolled AZ31 Mg alloy sheets are welded by friction stir welding (FSW) in this study, followed by annealing and hot rolling with different reductions. The effects of welding speed and the rolling reduction on the… read more here.
Keywords: rolling reduction; effects welding; friction stir; hot rolling ... See more keywords
Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties
Sign Up to like & getrecommendations! Published in 2020 at "Chinese Journal of Aeronautics"
DOI: 10.1016/j.cja.2020.08.044
Abstract: Abstract Ti/Al/Mg laminated composites were successfully fabricated by hot roll bonding. The effects of the rolling reduction on the microstructural evolution and mechanical properties of the composites were explored. The results show that Ti/Al/Mg laminated… read more here.
Keywords: rolling reduction; laminated composites; layer; roll bonding ... See more keywords
Effect of rolling reduction and annealing process on microstructure and corrosion behavior of LZ91 alloy sheet
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65341-9
Abstract: Abstract The effect of rolling reduction and annealing process on the microstructure and corrosion behavior of Mg−9Li−1Zn (LZ91) alloy was investigated. The test alloy sheets were cold rolled with the reduction of 50% and 75%,… read more here.
Keywords: annealing process; corrosion; rolling reduction; lz91 alloy ... See more keywords
The Role of Cold Rolling Reduction on the Microstructure and Mechanical Properties of Ultra-Low Carbon Bainitic Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15093070
Abstract: The present study investigates the microstructure and mechanical properties of ultra-low carbon bainitic steel (UCBS) under different cold rolling reductions. When the rolling reduction ratios were increased to 80%, the microstructure was refined, and the… read more here.
Keywords: microstructure mechanical; rolling reduction; properties ultra; mechanical properties ... See more keywords
Effect of Cold-Rolling Reduction on Recrystallization Microstructure, Texture and Corrosion Properties of the X2CrNi12 Ferritic Stainless Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15196914
Abstract: X2CrNi12 ferritic stainless steel has a wide range of application prospects in the railway transportation, construction, and automobile fields due to its excellent properties. The properties of X2CrNi12 ferritic stainless steel can be further improved… read more here.
Keywords: reduction; stainless steel; rolling reduction; cold rolling ... See more keywords
Effect of Rolling Reduction on Microstructures and Mechanical Properties of Sc-Containing Al-3.2Cu-1.5Li Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13040770
Abstract: The effects of various rolling reductions (64.7%, 72.1%, 81.4% and 88.2%) on the microstructures and mechanical behaviors of Sc-containing Al-3.2Cu-1.5Li-based alloys were experimentally investigated through XRD, SEM (equipped with EBSD), TEM and the tensile test.… read more here.
Keywords: 2cu 5li; effect rolling; microstructures mechanical; rolling reduction ... See more keywords