Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2016.12.058
Abstract: An experimental study has been carried out to assess the adhesion quality of composite-to-metal bonded joints under salt spray ageing conditions. The tests were performed according to the ASTM standard of floating roller peel tests… read more here.
Keywords: bonded joints; salt spray; composite metal; adhesion ... See more keywords
Corrosion behavior of Al film on uranium in salt spray test
Sign Up to like & getrecommendations! Published in 2017 at "RSC Advances"
DOI: 10.1039/c6ra28407h
Abstract: The corrosion behavior of Al film coated uranium and bare uranium under neutral salt spray conditions are evaluated. Moreover, the corrosion process and electrochemical mechanism are investigated. Pits in uranium appear in the initial stage… read more here.
Keywords: corrosion; salt spray; corrosion behavior; film ... See more keywords
Failure behavior study of EB-PVD TBCs under salt spray corrosion and thermal shock cycles
Sign Up to like & getrecommendations! Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/abfd5d
Abstract: Thermal barrier coatings (TBCs) are the most used methods to protect the internal hot end components of aeroengines for their improved thermal efficiency. Because of the severe service environment of TBCs, their spalling failure poses… read more here.
Keywords: tbcs; spray corrosion; salt spray; thermal shock ... See more keywords
Stress Corrosion Cracking Susceptibility of 304L Substrate and 308L Weld Metal Exposed to a Salt Spray
Sign Up to like & getrecommendations! Published in 2017 at "Materials"
DOI: 10.3390/ma10020187
Abstract: 304 stainless steels (SS) were considered as the materials for a dry storage canister. In this study, ER (Electrode Rod) 308L was utilized as the filler metal for the groove and overlay welds of a… read more here.
Keywords: salt spray; susceptibility; weight loss; stress corrosion ... See more keywords
Investigation of Mechanical Properties and Salt Spray Corrosion Test Parameters Optimization for AA8079 with Reinforcement of TiN + ZrO2
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14185260
Abstract: This work mainly focuses on increasing the mechanical strength and improving the corrosion resistance of an aluminum alloy hybrid matrix. The composites are prepared by the stir casting procedure. For this work, aluminum alloy 8079… read more here.
Keywords: spray corrosion; salt spray; corrosion; reinforcement ... See more keywords
Effect of Shot Peen Forming on Corrosion-Resistant of 2024 Aluminum Alloy in Salt Spray Environment
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15238583
Abstract: The effect of shot peen forming on the corrosion-resistant of 2024 aluminum alloy in a salt spray environment was studied with an electrochemical workstation. The surface morphology and cross sectional morphology of the original and… read more here.
Keywords: salt spray; alloy; corrosion; shot peen ... See more keywords
Insight of Salt Spray Corrosion on Mechanical Properties of TA1-Al5052 Self-Piercing Riveted Joint
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15238643
Abstract: Self-piercing riveted (SPR) joints in automobiles inevitably suffer from corrosion damage and performance reduction. In this work, the influence of salt spray corrosion on the mechanical properties of TA1-Al5052 alloy SPR joints was studied. The… read more here.
Keywords: salt spray; spray corrosion; salt; failure ... See more keywords
Comparative EIS Quantification of Coating Weathering, Long-Term Immersion and Salt Spray Test Outcomes
Sign Up to like & getrecommendations! Published in 2023 at "Corrosion"
DOI: 10.5006/4267
Abstract: In the present study, we repeatedly used the surface-applied paste electrolyte cell to record the EIS spectra of four coating systems with different barrier properties exposed to different environments. The absence of a liquid electrolyte… read more here.
Keywords: salt spray; immersion; temperature; eis quantification ... See more keywords