Microstructure and property characterization of Ti/TiBCN reinforced Ti based composite coatings fabricated by laser cladding with different scanning speed
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2019.110023
Abstract: Abstract In this paper, Ti/TiBCN reinforced Ti based composite coatings were prepared on Ti6Al4V alloys. The influence of the scanning speed on the dilution rate, microstructure and properties was studied. Results showed that when the… read more here.
Keywords: tibcn reinforced; composite coatings; speed; scanning speed ... See more keywords
Effect of laser scanning speed on microstructure and properties of Fe based amorphous/ nanocrystalline cladding coatings
Sign Up to like & getrecommendations! Published in 2020 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2020.123091
Abstract: Abstract Laser cladding of ( F e 0.497 C r 0.243 M o 0.084 B 0.093 C 0.084 ) 98 N b 2 on 45 steel substrate was fabricated by using a coaxial powder feeding… read more here.
Keywords: laser scanning; laser; scanning speed; effect laser ... See more keywords
Effect of scanning speed on continuous wave laser scribing of metal thin films: theory and experiment
Sign Up to like & getrecommendations! Published in 2017 at "Laser Physics"
DOI: 10.1088/1555-6611/27/1/016101
Abstract: In this paper continuous wave laser scribing of the metal thin films have been investigated theoretically and experimentally. A formulation is presented based on parameters like beam power, spot size, scanning speed and fluence thresholds.… read more here.
Keywords: thin films; metal thin; continuous wave; speed ... See more keywords
Influence of scanning speed on microstructures and mechanical properties of SLM produced Hastelloy X: as-built and solution-treated
Sign Up to like & getrecommendations! Published in 2024 at "Materials Research Express"
DOI: 10.1088/2053-1591/ad59f2
Abstract: Hastelloy X (HX) alloys with ideal strength and ductility match can be obtained by selective laser melting (SLM) and a proper follow-up heat treatment. This work studies the influence of scanning speed on grain size,… read more here.
Keywords: mechanical properties; solution; influence scanning; hastelloy ... See more keywords
Effect of scanning speed on texture-elicited vibrations
Sign Up to like & getrecommendations! Published in 2020 at "Journal of the Royal Society Interface"
DOI: 10.1098/rsif.2019.0892
Abstract: To sense the texture of a surface, we run our fingers across it, which leads to the elicitation of skin vibrations that depend both on the surface and on exploratory parameters, particularly scanning speed. The… read more here.
Keywords: elicited vibrations; speed texture; scanning speed; texture elicited ... See more keywords
Effects of Laser Scanning Speed on Microstructure, Microhardness, and Corrosion Behavior of Laser Cladding Ni45 Coatings
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Chemistry"
DOI: 10.1155/2020/1438473
Abstract: The effects of laser scanning speed on the microstructure, microhardness, and corrosion behavior of Ni45 coatings were investigated by using optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), microhardness, and electrochemical measurements. The… read more here.
Keywords: laser scanning; corrosion; microhardness; scanning speed ... See more keywords
Influence of scanning speed and hatch distance on defects, microstructure, and mechanical performance of Fe–Mn–Al–Ni–C low-density steel fabricated via directed energy deposition
Sign Up to like & getrecommendations! Published in 2025 at "Powder Metallurgy"
DOI: 10.1177/00325899251339990
Abstract: This study examined the effects of the directed energy deposition (DED) process parameters on the microstructural evolution, defect formation, and mechanical properties of Fe–Mn–Al–Ni–C low-density steel. The samples were fabricated in an Ar atmosphere by… read more here.
Keywords: low density; speed; hatch; energy deposition ... See more keywords
Properties of Ni-Al2O3 composite coating by laser-assisted pulse electrodeposition.
Sign Up to like & getrecommendations! Published in 2023 at "Applied optics"
DOI: 10.1364/ao.478974
Abstract: To study the influence of laser process parameters on the surface properties of the coating, N i-A l 2 O 3 composite coatings on 304 stainless-steel sheets with laser-assisted pulsed electrodeposition was proposed in this… read more here.
Keywords: composite coating; electrodeposition; laser; scanning speed ... See more keywords
Influences of Scanning Speed on Microstructure, Anisotropic Properties and Corrosion of L-PBF SS316L within a High-Density Region
Sign Up to like & getrecommendations! Published in 2025 at "Materials Performance and Characterization"
DOI: 10.1520/mpc20250001
Abstract: In this study, stainless-steel 316L samples were fabricated by the laser powder-bed fusion (L-PBF) process under three distinct printing parameter sets, namely, varying scan speeds while maintaining other parameters fixed. The samples were categorized according… read more here.
Keywords: pbf; medium low; density; melt pools ... See more keywords
Estimation of the Scanning Speed of Random Texture by a Multirow Focal Plane Array
Sign Up to like & getrecommendations! Published in 2018 at "Optoelectronics, Instrumentation and Data Processing"
DOI: 10.3103/s8756699018030068
Abstract: Scanning devises based on a set of mutually shifted focal plane arrays to increase the sampling rate in a direction orthogonal to the scanning direction require a high degree of stabilization of the scanning speed… read more here.
Keywords: speed; random texture; focal plane; scanning speed ... See more keywords
Influence of Scanning Speed on Microstructure and Properties of Laser Cladded Fe-Based Amorphous Coatings
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12081279
Abstract: Fe-based amorphous alloys with excellent mechanical properties are suitable for preparing wear resistant coatings by laser cladding. In this study, a novel Fe-based amorphous coating was prepared by laser cladding on 3Cr13 stainless steel substrates.… read more here.
Keywords: scanning speeds; influence scanning; based amorphous; speed ... See more keywords