Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2020 at "Optical and Quantum Electronics"
DOI: 10.1007/s11082-020-02511-5
Abstract: Here we report X-ray response and optical properties of composite (ZnO)0.8(CdO)0.2 thick film deposited by simple, easy and low cost screen printing technique on glass substrates followed by sintering at 500 °C. X-ray diffraction pattern confirms…
read more here.
Keywords:
optoelectronic applications;
screen printing;
coating zno;
zno cdo ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-020-08594-w
Abstract: The conductivity of screen printing films at microwave frequency is one of the most important properties of conductive ink when applied in printed electronics. However, the existing methods of conductivity characterization at microwave frequency focus…
read more here.
Keywords:
screen printing;
microwave frequency;
conductivity screen;
printing films ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-018-1112-x
Abstract: Maintaining a vacuum between the two glasses to maximize the heat insulating performance, it is indispensable to array the pillar for the vacuum glazing to maintain the vacuum gap. In this paper, to investigate the…
read more here.
Keywords:
strength;
screen printing;
strength test;
vacuum ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Optik"
DOI: 10.1016/j.ijleo.2020.164376
Abstract: Abstract In present investigation polycrystalline copper selenide (CuSe) film was grown on glass substrate via economical & non vacuum based screen-printing and sintering technique. Optimum parameters to grow good quality films were found. Grown film…
read more here.
Keywords:
screen printing;
copper;
film;
printing sintering ... See more keywords
Photo from academic.microsoft.com
Sign Up to like & get
recommendations!
0
Published in 2021 at "ACS Omega"
DOI: 10.1021/acsomega.1c00638
Abstract: Stretchable electronics have demonstrated tremendous potential in wearable healthcare, advanced diagnostics, soft robotics, and persistent human–machine interfaces. Still, their applicability is limited by a reliance on low-throughput, high-cost fabrication methods. Traditional MEMS/NEMS metallization and off-contact…
read more here.
Keywords:
screen printing;
printing conductive;
nanomaterials stretchable;
advances screen ... See more keywords
Sign Up to like & get
recommendations!
2
Published in 2023 at "Nanoscale"
DOI: 10.1039/d2nr05840e
Abstract: Screen printing is a promising route towards high throughput printed electronics. Currently, the preparation of nanomaterial based conductive inks involves complex formulations with often toxic surfactants in the ink's composition, making them unsuitable as an…
read more here.
Keywords:
friendly screen;
agnw ink;
screen printing;
eco friendly ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
3
Published in 2023 at "Physical Chemistry Chemical Physics"
DOI: 10.1039/d3cp02005c
Abstract: Near-infrared (NIR) emitting phosphors are currently under considerable attention due to their high demand in a wide variety of applications such as light detection and ranging (LiDAR), short-range communications, security,...
read more here.
Keywords:
cost effective;
approach doped;
screen printing;
printing approach ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "IEEE Journal of Photovoltaics"
DOI: 10.1109/jphotov.2019.2959939
Abstract: Flatbed screen printing is the dominating process in industry for metallization of silicon solar cells. It offers high throughput rates, high flexibility of printing pattern, and an overall very cost-effective production compared with other printing…
read more here.
Keywords:
screen;
solar cells;
screen printing;
knotless ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Materials"
DOI: 10.3390/ma14041034
Abstract: A screen printing process was used to substitute dry molding to solve the uneven compaction problem in the coil center column during molding in this study. FeSiCr alloy powders (FSC) with a large particle size…
read more here.
Keywords:
carbonyl iron;
screen printing;
mixing ratio;
powder ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2022 at "Materials"
DOI: 10.3390/ma15051953
Abstract: Silver paste is widely used for low-temperature co-fired ceramic (LTCC) electrodes. In this work, a kind of LTCC silver paste for fine-line screen-printing was developed by considering the effect of the organic vehicle on rheological…
read more here.
Keywords:
silver paste;
screen printing;
paste;
organic vehicle ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15082786
Abstract: Glass frit bonding is a widely used technology to cap and seal micro-electromechanical systems on the wafer level using a low melting point glass. Screen printing is the main method to apply glass frit paste…
read more here.
Keywords:
glass frit;
wafer level;
hermetic packaging;
screen printing ... See more keywords