Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.11.100
Abstract: Abstract Magnesium alloys have superior mechanical property for industry applications as structural materials, but their poor corrosion resistance is still a bottleneck problem. Mg-Al-Zn alloys are one of the most extensively used Mg alloys. In…
read more here.
Keywords:
second phases;
corrosion;
effect second;
corrosion behavior ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.151987
Abstract: Abstract In this study, the Zn-1.6 Mg alloy was processed by multi-pass equal channel angular pressing (ECAP) at three different temperatures to investigate its microstructural evolutions and mechanical properties. The obtained results showed that the microstructure…
read more here.
Keywords:
nanoscale particles;
evolution second;
phases ecap;
second phases ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.156619
Abstract: Abstract Formation of second phases in as-cast Mg-xNd-0.3Zr (x = 0, 5 and 11) alloys was characterized and the role of second phases on the corrosion resistance was investigated. Mg12Nd second phase with a semi-continuous network along…
read more here.
Keywords:
corrosion resistance;
corrosion;
second phases;
second phase ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.158493
Abstract: Abstract The effect of second phases on discharge properties and corrosion behaviors of the as-cast Mg-Ca-Zn anodes for primary Mg-air batteries is investigated in this work. The results indicate that the second phases varied from…
read more here.
Keywords:
discharge properties;
second phases;
discharge;
phases discharge ... See more keywords
Sign Up to like & get
recommendations!
3
Published in 2023 at "Nano letters"
DOI: 10.1021/acs.nanolett.2c04135
Abstract: The microstructure of the Li7La3Zr2O12 (LLZO) garnet solid electrolyte is critical for its performance in all-solid-state lithium-ion battery. During conventional high-temperature sintering, second phases are generated at the grain boundaries due to the reaction between…
read more here.
Keywords:
phases garnet;
second phases;
microstructure second;
garnet solid ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.1c23313
Abstract: The cyclability and frequency dependence of the adiabatic temperature change (ΔTad) under an alternating magnetic field (AMF) are significantly important from the viewpoint of refrigeration application. Our studies demonstrated, by direct measurements, that the cyclability…
read more here.
Keywords:
second phases;
introducing second;
ferh alloys;
field ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Materials"
DOI: 10.3390/ma12162515
Abstract: The effects of second phases on microstructure, microhardness, and corrosion behavior of aged Mg-3Sn (T3) and Mg-3Sn-1Ca (TX31) alloys are investigated systematically. The thermal stability of the CaMgSn phase is higher than that of the…
read more here.
Keywords:
microstructure;
second phases;
corrosion;
phases microstructure ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16031004
Abstract: Wrought magnesium alloys have received attention due to their potential application as lightweight materials. However, their use is limited by their poor corrosion resistance. Rare earth additions have the potential to enhance corrosion resistance. The…
read more here.
Keywords:
second phases;
az31 az61;
salt fog;
corrosion resistance ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
2
Published in 2023 at "Materials"
DOI: 10.3390/ma16093573
Abstract: The aim of this work is to investigate the effect of different second phases on the composite spinning-extrusion forming and mechanical properties of Al–Cu–Li alloy. With that purpose, four kinds of second phases blanks were…
read more here.
Keywords:
second phases;
extrusion forming;
spinning extrusion;
composite spinning ... See more keywords