Mechanical Response and Microstructure Evolution of a Repetitive Upsetting Extrusion Processed AZ61 Magnesium Alloy in Semi‐Solid Compression
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900362
Abstract: Semi‐solid billets of an AZ61 magnesium alloy are prepared by a repetitive upsetting‐extrusion (RUE)‐based strain induced melt activation (SIMA) method. Mechanical response and microstructure evolution in compression of the semi‐solid slurry with high solid fraction… read more here.
Keywords: compression; semi solid; solid particles; microstructure ... See more keywords
Single‐Ion Conducting Soft Electrolytes for Semi‐Solid Lithium Metal Batteries Enabling Cell Fabrication and Operation under Ambient Conditions
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Energy Materials"
DOI: 10.1002/aenm.202101813
Abstract: Despite their potential as post lithium‐ion batteries, solid‐state Li‐metal batteries are struggling with insufficient electrochemical sustainability and ambient operation limitations. These challenges mainly stem from lack of reliable solid‐state electrolytes. Here, a new class of… read more here.
Keywords: semi solid; metal batteries; ion conducting; ion ... See more keywords
Investigation of the Microstructure and Mechanical Properties of AZ31/Graphene Composite Fabricated by Semi-solid Isothermal Treatment and Hot Extrusion
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03736-w
Abstract: Magnesium matrix composites reinforced with 0.3 wt.% graphene were fabricated by semi-solid isothermal treatment using various reheating conditions and hot extrusion. The microstructures of the hot-extruded AZ31/graphene composites were clearly refined, with the finest grain size… read more here.
Keywords: hot extrusion; solid isothermal; semi solid; fabricated semi ... See more keywords
Penetration and Microbial Inactivation by High Voltage Atmospheric Cold Plasma in Semi-Solid Material
Sign Up to like & getrecommendations! Published in 2020 at "Food and Bioprocess Technology"
DOI: 10.1007/s11947-020-02506-w
Abstract: Multiple studies have demonstrated atmospheric cold plasma as an effective non-thermal technology for inactivating bacteria, spores, and other microbial contaminants in foods and on non-food surfaces. However, few studies have applied this technique to semi-solid… read more here.
Keywords: plasma; semi solid; cold plasma; inactivation ... See more keywords
Microstructure evolution during remelting of high solid fraction ZL101 alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Shanghai Jiaotong University (Science)"
DOI: 10.1007/s12204-017-1885-6
Abstract: This work deals with the reheating process for semi-solid thixoforming of ZL101 (AlSi7Mg) alloy. The semi-solid state can decrease the viscosity and the resistance while sheared because of the evolutional behavior, which is characterized by… read more here.
Keywords: semi solid; zl101; microstructure evolution; zl101 alloy ... See more keywords
Microstructural coarsening of 6061 aluminum alloy semi-solid billets prepared via recrystallization and partial melting
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-017-0737-5
Abstract: In this study, the Recrystallization and partial melting (RAP) process was performed to prepare 6061 aluminum alloy semi-solid billets. The microstructural evolution and coarsening of the materials were investigated. During the RAP process, the 6061… read more here.
Keywords: 6061 aluminum; semi solid; aluminum alloy;
Effect of heat treatment on microstructure and properties of semi-solid squeeze casting AZ91D
Sign Up to like & getrecommendations! Published in 2020 at "China Foundry"
DOI: 10.1007/s41230-020-9103-9
Abstract: Semi-solid AZ91D magnesium alloy billets were prepared by near-liquidus heat holding. Semi-solid squeeze casting was conducted at 575, 585 and 595 °C, respectively, with 1 mm·s −1 squeeze speed. The semisolid squeeze casting AZ91D samples… read more here.
Keywords: semi solid; treatment; solid squeeze; squeeze ... See more keywords
In-line UV spectroscopy for the quantification of low-dose active ingredients during the manufacturing of pharmaceutical semi-solid and liquid formulations.
Sign Up to like & getrecommendations! Published in 2018 at "Analytica chimica acta"
DOI: 10.1016/j.aca.2018.02.007
Abstract: UltraViolet (UV) spectroscopy was evaluated as an innovative Process Analytical Technology (PAT) - tool for the in-line and real-time quantitative determination of low-dosed active pharmaceutical ingredients (APIs) in a semi-solid (gel) and a liquid (suspension)… read more here.
Keywords: low dose; line; semi solid; method ... See more keywords
A time-dependent power law viscosity model and its application in modelling semi-solid die casting of 319s alloy
Sign Up to like & getrecommendations! Published in 2017 at "Acta Materialia"
DOI: 10.1016/j.actamat.2016.11.031
Abstract: Abstract The flow parameters in the conventional power law viscosity model are generally considered to be function of temperature without considering the time-dependent property of the thixotropic flow. Practically, however, semi-solid casting is a time-dependent… read more here.
Keywords: semi solid; time; model; time dependent ... See more keywords
Rheological transitions in semi-solid alloys: in-situ imaging and LBM-DEM simulations
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2020.03.011
Abstract: Abstract Rheological transitions from suspension flow to granular deformation and shear cracking are investigated in equiaxed-globular semi-solid alloys by combining synchrotron radiography experiments with coupled lattice Boltzmann method, discrete element method (LBM-DEM) simulations. The experiments… read more here.
Keywords: lbm dem; semi solid; solid alloys; rheological transitions ... See more keywords
Semi-solid state electrochromic device based on deep eutectic solvent gel electrolyte and transparent Au modified FTO electrode
Sign Up to like & getrecommendations! Published in 2017 at "Electrochimica Acta"
DOI: 10.1016/j.electacta.2017.11.052
Abstract: Abstract A semi-solid state electrochromic device with deep eutectic solvent gel as the electrolyte, Ethyl-viologen as the electrochromic compound, and K4Fe(CN)6 as the electron donor was reported. Four kinds of silica were simply mixed with… read more here.
Keywords: gel electrolyte; electrochromic device; semi solid; electrode ... See more keywords