Novel circuit design of serial–parallel multiplier in quantum-dot cellular automata technology
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Computational Electronics"
DOI: 10.1007/s10825-018-1220-y
Abstract: The quantum-dot cellular automata (QCA) is a novel technology with greater potential to provide circuits with small size and high speed compared with complementary metal–oxide–semiconductor (CMOS) technology. This paper presents and evaluates a novel serial–parallel… read more here.
Keywords: serial parallel; quantum dot; circuit; dot cellular ... See more keywords
Pilot study on wideband sound absorber obtained by adopting a serial-parallel coupling manner
Sign Up to like & getrecommendations! Published in 2017 at "Applied Acoustics"
DOI: 10.1016/j.apacoust.2017.03.021
Abstract: Abstract Micro-perforated panel (MPP) absorber has been widely used in noise control and is regarded as a promising alternative to the traditional porous materials. However, the absorption bandwidth of single MPP absorbers is always insufficient… read more here.
Keywords: absorption; parallel coupling; serial parallel; coupling manner ... See more keywords
Analysis of the influence of ply-orientation in delamination progression in composites laminates using the Serial/Parallel Mixing Theory
Sign Up to like & getrecommendations! Published in 2021 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2021.108847
Abstract: Abstract In this work, an analysis on the influence of fibre-orientation in the progression of delamination was carried out. The study was focused on a cracked beam according to an End Notch Flexure test configuration.… read more here.
Keywords: parallel mixing; mixing theory; progression; serial parallel ... See more keywords
Algorithm for the static balancing of serial and parallel mechanisms combining counterweights and springs: Generation, assessment and ranking of effective design variants
Sign Up to like & getrecommendations! Published in 2019 at "Mechanism and Machine Theory"
DOI: 10.1016/j.mechmachtheory.2019.03.031
Abstract: Abstract Static balancing through passive devices is a suitable strategy to reduce motor loads for numerous applications in the automation and robotics fields. Many known methods require initially defining which balancing elements to install, thus… read more here.
Keywords: balancing serial; algorithm static; static balancing; serial parallel ... See more keywords
Quantitative comparison of binary particle mass and size segregation between serial and parallel type hoppers of blast furnace bell-less top charging system
Sign Up to like & getrecommendations! Published in 2018 at "Powder Technology"
DOI: 10.1016/j.powtec.2018.01.020
Abstract: Abstract Uniform particle packed-bed permeability facilitates a smoother operation and a higher energy efficiency of the blast furnace ironmaking process. Two types of bell-less top charging systems, namely, serial and parallel type hoppers, are widely… read more here.
Keywords: parallel type; serial parallel; particle; type hoppers ... See more keywords
Design of a novel 5-DOF hybrid serial-parallel manipulator and theoretical analysis of its parallel part
Sign Up to like & getrecommendations! Published in 2018 at "Robotics and Computer-integrated Manufacturing"
DOI: 10.1016/j.rcim.2018.04.004
Abstract: Abstract Parallel mechanisms (PMs) with two rotational degrees-of-freedom (DOF) and one translational DOF (2R1T) have gained much attention, in view of their good comprehensive performance in the field of machine tools. In this paper, a… read more here.
Keywords: dof hybrid; serial parallel; analysis; parallel manipulator ... See more keywords
Geometric error modeling and source error identification methodology for a serial–parallel hybrid kinematic machining unit with five axis
Sign Up to like & getrecommendations! Published in 2024 at "Robotica"
DOI: 10.1017/s0263574724002054
Abstract: Abstract To meet the high-precision positioning requirements for hybrid machining units, this article presents a geometric error modeling and source error identification methodology for a serial–parallel hybrid kinematic machining unit (HKMU) with five axis. A… read more here.
Keywords: methodology; serial parallel; error modeling; source ... See more keywords
4-Bit All-Optical Serial-to-Parallel Converter With Sub-dB/cm Delay Lines Based on Rib Waveguides
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Lightwave Technology"
DOI: 10.1109/jlt.2021.3104530
Abstract: This paper extends our previous work on the microring resonator-type serial-to-parallel conversion scheme aimed for all-optical label processing on the silicon photonic platform. In the previously proposed scheme, the architecture of the delay lines was… read more here.
Keywords: serial parallel; parallel conversion; delay lines; delay ... See more keywords
Serial-parallel Fractional-integer-order Echo state Network for Time Series Prediction
Sign Up to like & getrecommendations! Published in 2025 at "IEEE Transactions on Knowledge and Data Engineering"
DOI: 10.1109/tkde.2025.3622941
Abstract: In this paper, considering the memory capability of fractional-order reservoirs and the immunity of integer-order reservoirs, a serial-parallel fractional-integer-order echo state network(SP-FIO-ESN) model, is proposed for time series prediction. First, according to the superior adaptive… read more here.
Keywords: serial parallel; parallel fractional; fio esn; order ... See more keywords
Kinematic Calibration of Serial and Parallel Robots Based on Finite and Instantaneous Screw Theory
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Robotics"
DOI: 10.1109/tro.2020.2969028
Abstract: In current robot calibration approaches, the error propagation and identification of serial and parallel robots fail to be solved intuitively and generically, resulting in an inefficient calibration implementation and a low accuracy improvement. In this… read more here.
Keywords: calibration; kinematic calibration; parallel robots; instantaneous screw ... See more keywords
Serial-Parallel Estimation Model-Based Sliding Mode Control of MEMS Gyroscopes
Sign Up to like & getrecommendations! Published in 2021 at "IEEE Transactions on Systems, Man, and Cybernetics: Systems"
DOI: 10.1109/tsmc.2020.2981807
Abstract: This article proposes a serial-parallel estimation model (SPEM)-based sliding mode control (SMC) of MEMS gyroscope. For the system nonlinearity, the linear-in-parameterized dynamics are formulated and the updating law of the parameter vector is given. For… read more here.
Keywords: sliding mode; estimation model; serial parallel; based sliding ... See more keywords