Cytocompatibility, physical properties, and antibiofilm activity of endodontic sealers with amoxicillin
Sign Up to like & getrecommendations! Published in 2017 at "Microscopy Research and Technique"
DOI: 10.1002/jemt.22898
Abstract: The aim was to evaluate the cytocompatibility of the AH Plus and Sealapex associated with amoxicillin (AA) in a quantity of 10% by total weight of the sealers, the flow and setting time of these… read more here.
Keywords: antibiofilm activity; setting time; physical properties; cytocompatibility physical ... See more keywords
Development of the nano-composite cement: Application in regulating grouting in complex ground conditions
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Mountain Science"
DOI: 10.1007/s11629-017-4729-9
Abstract: Improvement of the fluidity and setting time of grouting materials has been recognized as an effective approach of seepage prevention in foundation works, and it is quite common to be used for handling severe leakages… read more here.
Keywords: ground conditions; composite cement; cement; setting time ... See more keywords
Effect of chemical admixtures on setting time, fluidity and mechanical properties of phosphorus gypsum based self-leveling mortar
Sign Up to like & getrecommendations! Published in 2017 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-016-0849-y
Abstract: Phosphorus Gypsum (PG) based Self-Leveling mortar (GSL) is a green and efficient material for floor construction. Its hydration kinetics, rheology property and their effect on mechanical strength of hydrated GSL were crucial to its final… read more here.
Keywords: fluidity; gypsum based; effect; setting time ... See more keywords
Influence of retardation and acceleration of setting time on the efficiency of water defluoridation by calcined gypsum
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Environmental Science and Technology"
DOI: 10.1007/s13762-017-1259-5
Abstract: Fluoride ion (F−) removal technologies from water (defluoridation) suffer from cost and/or efficiency drawbacks. The hugely available low-cost calcined gypsum (plaster of paris) represents a material of choice, especially in the developing countries. Partially soluble… read more here.
Keywords: water; water defluoridation; setting time; calcined gypsum ... See more keywords
Investigated on predictive compressive strength model and setting time of controlled low-strength materials
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Pavement Research and Technology"
DOI: 10.1007/s42947-019-0093-1
Abstract: Most of the pipelines in Taiwan lie beneath road pavements. Maintaining existing pipelines and establishing new pipelines inevitably leads to the wide-scale excavation and backfilling, which can greatly interfere with traffic patterns. Controlled low-strength material… read more here.
Keywords: strength; controlled low; clsm; setting time ... See more keywords
Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.03.007
Abstract: Abstract In this research created binder was adapted for 3D printer and developing process was analysed in detail. According to the research, early setting time and strength is gained due to ettringite crystal growth. Methods… read more here.
Keywords: hydration process; process; setting time; printing technology ... See more keywords
Investigation of setting time and compressive strength of ready-mixed concrete blended with returned fresh concrete
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.11.201
Abstract: Abstract Returned fresh mix concrete (RFC) is a problem with both economic and environmental impacts. Therefore, investigators have recommended various ways to decrease the amount of RFC in manufacturing facilities. Among the most common procedures… read more here.
Keywords: compressive strength; rfc; time compressive; setting time ... See more keywords
Metakaolin-based geopolymer: Formation of new phases influencing the setting time with the use of additives
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.12.114
Abstract: Abstract The aim of this investigation was the development of a geopolymer grout. To achieve this goal, it is necessary to control the characteristics of the reactive mixture (i.e., between the dissolution of the mineral… read more here.
Keywords: geopolymer formation; time; based geopolymer; metakaolin based ... See more keywords
Influence of silica fume on the setting time and mechanical properties of a new magnesium phosphate cement
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.117544
Abstract: Abstract Magnesium silicon potassium phosphate cement (MSPPC), a new magnesium phosphate cement of the MgO-SiO2-K2HPO4 system, can possess higher strength, longer setting time, and better fluidity than the traditional magnesium phosphate cement (MPC). In MSPPC,… read more here.
Keywords: strength; silica fume; phosphate cement; magnesium ... See more keywords
Development of a concrete set retarder utilizing electric arc furnace dust
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.119378
Abstract: Abstract Retarding admixtures are used to increase the setting time of concrete, especially under hot weather conditions. They provide longer time for concrete to be transported, placed and consolidated. Several commercial retarders are used to… read more here.
Keywords: set retarder; time; time concrete; setting time ... See more keywords
Recovery of thermally treated fluorine-containing sludge as the substitutions of Portland cement
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2020.121030
Abstract: Abstract New solid waste with increasing output has provoked the exploration and development of new alternative SCMs. The enormous production of wet-base fluorine-containing sludge from electronic device manufacturing plants triggered consideration of land occupation, environmental… read more here.
Keywords: fluorine containing; thermally treated; setting time; containing sludge ... See more keywords