Shear behavior of greenschist along foliation plane considering anisotropy
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Earth Sciences"
DOI: 10.1007/s00531-019-01727-5
Abstract: The shear behavior of rock mass along its structural plane, i.e., joint, bedding plane, and foliation plane, plays a key role in determining rock strength which is highly anisotropic. The shear behavior along the foliation… read more here.
Keywords: along foliation; shear behavior; greenschist; plane ... See more keywords
Characteristics of Asperity Damage and Its Influence on the Shear Behavior of Granite Joints
Sign Up to like & getrecommendations! Published in 2017 at "Rock Mechanics and Rock Engineering"
DOI: 10.1007/s00603-017-1315-y
Abstract: Surface roughness significantly affects the shear behavior of rock joints; thus, studies on the asperity damage characteristics and its influence on the shear behavior of joints are extremely important. In this paper, shear tests were… read more here.
Keywords: asperity damage; normal stress; shear behavior; damage ... See more keywords
Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations
Sign Up to like & getrecommendations! Published in 2020 at "Applied Composite Materials"
DOI: 10.1007/s10443-020-09844-0
Abstract: Woven fabric thermoplastic composites possess high specific strength and stiffness along with thermoformability. To utilize the full potential of these materials to achieve better crash-safe designs in automotive structural parts, the measurement of non-linear shear… read more here.
Keywords: woven fabric; fabric thermoplastic; modeling shear; thermoplastic composites ... See more keywords
Microstructure evolution and shear behavior of Au–Sn/Ni–xCo (x = 20, 40, 60, and 80 at.%) joints soldered at 350 °C
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6413-9
Abstract: Interfacial reaction and shear behavior of the joints between the Au–29Sn (at.%) solder and the Ni–xCo (x = 20, 40, 60, and 80 at%) alloys soldered at 350 °C for various durations were investigated in this study. The results… read more here.
Keywords: ni3sn2 layer; thickness ni3sn2; xco joints; soldered 350 ... See more keywords
Experimental study on the shear behavior of the interface between cushion materials and the concrete raft
Sign Up to like & getrecommendations! Published in 2018 at "Earthquake Engineering and Engineering Vibration"
DOI: 10.1007/s11803-018-0432-2
Abstract: Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order… read more here.
Keywords: raft; behavior interface; cushion; interface ... See more keywords
Shear behavior of Reinforced Concrete (RC) beams with circular web openings without additional shear reinforcement
Sign Up to like & getrecommendations! Published in 2017 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-016-0387-7
Abstract: The introduction of an opening into a Reinforced Concrete (RC) beam leads to a reduction to both the beam’s stiffness and its overall structural capacity due to stress concentrations and local cracking around the opening.… read more here.
Keywords: concrete beams; behavior reinforced; reinforced concrete; beams circular ... See more keywords
Direct Shear Behavior of a Mixture of Sand and Tire Chips Using X-ray Computed Tomography and Discrete Element Method
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Geosynthetics and Ground Engineering"
DOI: 10.1007/s40891-019-0160-3
Abstract: Granular materials such as soils, powders, and other particulate materials have been widely used in geotechnical engineering. In particular, sandy soils are one of the representative ones. Recently, there has been attention on environment-friendly materials… read more here.
Keywords: ray; method; tire chips; direct shear ... See more keywords
Shear behavior of horizontal joints between precast panels
Sign Up to like & getrecommendations! Published in 2018 at "Asian Journal of Civil Engineering"
DOI: 10.1007/s42107-018-0053-0
Abstract: Abstract The objective of this study is to investigate the shear resisting capacity of precast wall-to-wall horizontal connection system by dowel action and shear friction. Three types of connection systems, which have varying embedment length… read more here.
Keywords: capacity; joints precast; horizontal joints; behavior horizontal ... See more keywords
Numerical investigation on the shear behavior of jointed coal mass
Sign Up to like & getrecommendations! Published in 2019 at "Computers and Geotechnics"
DOI: 10.1016/j.compgeo.2018.11.005
Abstract: Abstract Understanding the shear failure mechanisms of coal mass is essential to dealing with mining issues, including roof collapses, pillar instabilities, and severe roadway closures. A numerical three-dimensional synthetic rock-mass method was used to study… read more here.
Keywords: coal mass; mass; numerical investigation; shear behavior ... See more keywords
Mesoscale numerical investigation of the effects of fiber stiffness on the shear behavior of fiber-reinforced granular soil
Sign Up to like & getrecommendations! Published in 2021 at "Computers and Geotechnics"
DOI: 10.1016/j.compgeo.2021.104259
Abstract: Abstract Fiber reinforcement techniques can effectively optimize the engineering properties of ground soils. This study aims to investigate the influence of fiber stiffness on the shear behavior of fiber-reinforced granular soil. First, the particle shapes… read more here.
Keywords: fiber reinforced; fiber stiffness; stiffness shear; soil ... See more keywords
Influence of intensity & eccentricity of posttensioning force and concrete strength on shear behavior of epoxied joints in segmental box girder bridges
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.11.220
Abstract: Abstract Precast concrete segmental bridges have the advantages of rapid construction speed, excellent quality control and low cost. The structural behavior of segmental bridges largely depends on the behavior of the joints between segments. In… read more here.
Keywords: epoxied joints; strength; box girder; shear behavior ... See more keywords