Synthesis of Cu-10Sn/SiC Metal Matrix Composites and Experimental Investigation of its Adhesive Wear Behaviour
Sign Up to like & getrecommendations! Published in 2018 at "Silicon"
DOI: 10.1007/s12633-018-9848-6
Abstract: The objective is to fabricate Cu-10Sn alloy and its composites reinforced with varying wt% of SiC (5, 10 and 15) to investigate its dry sliding wear behaviour. Microstructural analysis for composites revealed well dispersed SiC… read more here.
Keywords: sic composite; synthesis 10sn; matrix; 10sn sic ... See more keywords
Moisture Ingress and Degradation of Additively Manufactured PLA, ABS and PLA/SiC Composite Parts
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101529
Abstract: Abstract Moisture penetration and the age-related degradation of parts made with Fused Filament Fabrication (FFF) using PolyLactic Acid (PLA), Silicon Carbide (SiC) filled PLA composites, and Acrylonitrile Butadiene Styrene (ABS) are reported in this paper.… read more here.
Keywords: pla sic; degradation; composite parts; sic composite ... See more keywords
Bright silicon vacancy centers in diamond/SiC composite films synthesized by a MPCVD method
Sign Up to like & getrecommendations! Published in 2021 at "Carbon"
DOI: 10.1016/j.carbon.2020.09.032
Abstract: Abstract SiC is always produced forming diamond/SiC composite films owing to the oversaturated doping of Si atoms during the preparation of high emission SiV centers. As a higher refractive index material (n = 2.72), the presence of… read more here.
Keywords: gas; sic composite; siv centers; diamond sic ... See more keywords
Microstructure and properties of 2D-Cf/SiC composite fabricated by combination of CVI and PIP process with SiC particle as inert fillers
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2016.10.134
Abstract: Abstract 2D-C f /SiC composite was manufactured by chemical vapor inflation (CVI) combined with polymer impregnation and pyrolysis (PIP) with SiC particle as inert fillers. The effects of CVI processes on SiC morphologies and the… read more here.
Keywords: particle inert; cvi; sic composite; sic particle ... See more keywords
Porous (SiCw-Si3N4w)/(Si3N4-SiC) composite with enhanced mechanical performance fabricated by 3D printing
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.05.011
Abstract: Abstract SiC whisker and Si3N4 whisker-reinforced Si3N4-SiC ((SiCw-Si3N4w)/(Si3N4-SiC)) composite was synthesized by 3D printing for the first time, by the combination of printed-Si-body nitridation and chemical vapor infiltration-SiC methods. The mechanical properties of the composite… read more here.
Keywords: sic composite; sicw; si3n4 sic; sicw si3n4w ... See more keywords
Mechanical properties and oxidation resistance of phenolic formaldehyde interlocking CNTs-Cf/SiC composite
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.01.248
Abstract: Abstract To improve the mechanical properties and oxidation resistance of short carbon fiber reinforced silicon carbide matrix composites, carbon nanotubes (CNTs) were grown in-situ on carbon fiber surfaces through continuous CVD, a small amount of… read more here.
Keywords: cnts sic; mechanical properties; properties oxidation; sic composite ... See more keywords
Manufacturing of gradient Al/SiC composite wire by friction stir back extrusion
Sign Up to like & getrecommendations! Published in 2021 at "CIRP Journal of Manufacturing Science and Technology"
DOI: 10.1016/j.cirpj.2021.09.004
Abstract: Abstract In the current research, the friction stir back extrusion (FSBE) process as a novel method was used to fabricate the gradient AA6063/SiC composite wires. The scanning electron microscopy equipped with EDS analysis was utilized.… read more here.
Keywords: sic composite; aa6063 sic; friction stir; stir back ... See more keywords
Mechanical properties of SiCp/SiC composite lattice core sandwich panels fabricated by 3D printing combined with precursor impregnation and pyrolysis
Sign Up to like & getrecommendations! Published in 2020 at "Composite Structures"
DOI: 10.1016/j.compstruct.2020.112060
Abstract: Abstract Silicon carbide particle/silicon carbide (SiCp/SiC) composite lattice core sandwich panels were fabricated by selective laser sintering (SLS) combined with precursor impregnation and pyrolysis (PIP) process. The compression properties of the SiCp/SiC composite lattice core… read more here.
Keywords: sic composite; sicp sic; core sandwich; composite lattice ... See more keywords
Oxidation behaviour of a continuous carbon fibre reinforced ZrB2–SiC composite
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2017.04.012
Abstract: Abstract The oxidation behaviour in air of a hot-pressed ZrB 2 –SiC–Cf composite was investigated. Tests from 25 to 1550 °C in air were carried out at a rate of 10 °C/min and 45 °C/min. Then, 6 h isothermal… read more here.
Keywords: continuous carbon; behaviour continuous; sic composite; oxidation behaviour ... See more keywords
Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C
Sign Up to like & getrecommendations! Published in 2021 at "Corrosion Science"
DOI: 10.1016/j.corsci.2021.109706
Abstract: Abstract To evaluate the long-term ablation behavior and mechanism of carbon fiber reinforced ultra-high temperature ceramics, 3D Cf/ZrB2-SiC composite with homogeneous architecture was prepared via vibration-assisted slurry impregnation combined with precursor infiltration and pyrolysis. The… read more here.
Keywords: sic composite; ablation behavior; zrb2 sic; long term ... See more keywords
Estimating the effective elasticity properties of a diamond/β-SiC composite thin film by 3D reconstruction and numerical homogenization
Sign Up to like & getrecommendations! Published in 2019 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2019.04.029
Abstract: Abstract The main aim of the present work is to estimate the effective elastic stiffnesses of a two-phase diamond/β-SiC composite thin film that is fabricated by chemical vapor deposition (CVD). The microstructure-property relation via elastic… read more here.
Keywords: composite thin; homogenization; sic composite; thin film ... See more keywords