Sign Up to like & get
recommendations!
0
Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500222
Abstract: This study addresses challenges in metal matrix composite fabrication by optimizing an ultrasonic‐assisted stir casting process for aluminum LM25 composites reinforced with 5 wt% MoS2 and varying SiC nanoparticles (5–15 wt%). While previous research explored…
read more here.
Keywords:
lm25 composites;
aluminum lm25;
composites reinforced;
reinforced mos2 ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01725-w
Abstract: In order to improve the tribological properties of zinc-based alloy, SiC nanoparticles (an average grain size of 100 nm) were reinforced into Zn–38Al–3.5Cu–1.2 Mg alloy through a high-pressure jetting powder and semisolid stirring-assisted ultrasonic vibration process. In…
read more here.
Keywords:
alloy;
38al 5cu;
5cu alloy;
friction ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Acta Materialia"
DOI: 10.1016/j.actamat.2018.11.009
Abstract: Abstract Although the literature on mechanical properties of nanostructures is extensive, there are still few studies focusing on core–shell nanoparticles. In these systems, which are interesting in a broad range of applications, one could genuinely…
read more here.
Keywords:
shell sic;
shell;
deformation;
sic nanoparticles ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Acta biomaterialia"
DOI: 10.1016/j.actbio.2019.01.038
Abstract: Total joint replacement is currently the most successful clinical treatment for improving the life quality of individuals afflicted with end-stage osteoarthritis of knee or hip joints. However, release of wear and corrosion products from the…
read more here.
Keywords:
corrosion;
performance;
metal joint;
sic nanoparticles ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2021.149335
Abstract: Abstract In this study, reverse pulse plating technique was used to study the effect of various surfactants (anionic, non-ionic, and cationic) in electrolytes and incorporation of SiC nanoparticles (NPs) in the Sn matrix. The microstructural…
read more here.
Keywords:
reverse pulse;
pulse plating;
electrochemical tailoring;
sic nanoparticles ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.12.046
Abstract: Abstract Graphene encapsulated SiC nanoparticles were incorporated into aluminium matrix composite (AMC) and its tribological behaviour was investigated under dry sliding wear. SEM, 3D-laser, TEM and Raman microscopies were employed to characterise the composite. It…
read more here.
Keywords:
tribology;
encapsulated sic;
graphene;
nanoparticles tribology ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.07.102
Abstract: Abstract In the present work, elastic modulus of a hybrid aluminum matrix nanocomposite (HAMNC) reinforced with silicon carbide (SiC) whiskers and SiC nanoparticles is analyzed. To this end, a new multi-scale analytical model is developed…
read more here.
Keywords:
elastic modulus;
analytical model;
sic whisker;
sic nanoparticles ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.05.023
Abstract: Abstract Mixtures of magnesium powder and SiC nanoparticles at various volume fractions were mechanically milled to produce nanocrystalline Mg-SiC nanocomposites. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to…
read more here.
Keywords:
nanocomposite powders;
microscopy;
mechanical milling;
sic nanoparticles ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Superlattices and Microstructures"
DOI: 10.1016/j.spmi.2019.02.007
Abstract: Abstract Silicon carbide (SiC) nanoparticles with different sizes were successfully obtained by high energy ball milling. Room temperature magnetic measurements showed that the saturation magnetization of milled-SiC nanoparticles increases monotonically from 0.0006 to 0.0032 emu/g…
read more here.
Keywords:
high temperature;
milled sic;
sic nanoparticles;
temperature ferromagnetism ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.3c00194
Abstract: Silicon carbide (SiC) nanoparticles containing lattice defects are attracting considerable attention as next-generation imaging probes and quantum sensors for visualizing and sensing life activities. However, SiC nanoparticles are not currently used in biomedical applications because…
read more here.
Keywords:
highly dispersed;
dispersed silicon;
polyglycerol;
silicon carbide ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2025 at "Journal of Adhesion Science and Technology"
DOI: 10.1080/01694243.2025.2462165
Abstract: Abstract This research article explores the mechanical, thermal, and microstructural properties of Basalt Fabric composites that have been improved by incorporating Silicon Carbide (SiC) nanoparticles using electrostatic self-assembly. The study seeks to investigate the efficacy…
read more here.
Keywords:
electrostatic self;
basalt fabric;
analysis;
self assembly ... See more keywords