Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Inorganic and Organometallic Polymers and Materials"
DOI: 10.1007/s10904-018-0955-z
Abstract: Closed cell Al/SiCp composite foams are typically manufactured via casting method. The composite foams are made from aluminum foam into which SiCp is added at different concentrations (5, 10, 15 vol%). Effects of SiC particles on…
read more here.
Keywords:
strength;
composite foams;
sicp;
foam ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03483-y
Abstract: Cu/SiCP composites with high strength and high conductivity were prepared by in situ carbonization reaction of silicon. The Cu-Si powder and C powder were mechanically mixed, and in situ carbonized at 850°C for 48 h, then…
read more here.
Keywords:
prepared situ;
situ carbonization;
sicp composites;
mpa ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Chinese Journal of Aeronautics"
DOI: 10.1016/j.cja.2020.05.033
Abstract: Abstract SiCp/Al composites are difficult-to-cut materials. In recent years, electrical arc discharge machining has been developed to improve the machinability of these materials. However, there is a big challenge to build a satisfactory heat transfer…
read more here.
Keywords:
sicp;
temperature;
arc discharge;
discharge ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2022 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2021.117325
Abstract: Abstract Highly reinforced 316 L / SiCp metal matrix composites (MMC) walls have been additively manufactured by Direct Laser Deposition (DLD) using mixtures with different percentages of 316 L stainless steel powder and SiC particles…
read more here.
Keywords:
steel;
influence process;
parameters additive;
process parameters ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/14644207221126996
Abstract: This study used SiCp, SiCw, B4C, and GPLs as reinforcements for Ti750 matrix alloy and composites synthesized by spark plasma sintering. The oxidation performances of the composites were then evaluated at 800 °C. 5 vol.% SiCp…
read more here.
Keywords:
oxidation;
sicp;
reinforced ti750;
ti750 matrix ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2021 at "Materials"
DOI: 10.3390/ma14154143
Abstract: Compared with other materials, high-volume fraction aluminum-based silicon carbide composites (hereinafter referred to as SiCp/Al) have many advantages, including high strength, small change in the expansion coefficient due to temperature, high wear resistance, high corrosion…
read more here.
Keywords:
sicp;
high volume;
volume fraction;
speed ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15238498
Abstract: The influence of minor SiCp on the dynamic recrystallization (DRX) and dynamic precipitation behaviors of the Mg-5Zn matrix were investigated through the hot compression test. The results showed that the addition of SiCp improved the…
read more here.
Keywords:
hot compression;
minor sicp;
recrystallization;
5zn alloy ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2023 at "Materials"
DOI: 10.3390/ma16051993
Abstract: SiCp/AZ91D magnesium matrix composites with 30% SiCp were successfully prepared by pulsed current melting in this work. Then, the influences of the pulse current on the microstructure, phase composition, and heterogeneous nucleation of the experimental…
read more here.
Keywords:
matrix;
heterogeneous nucleation;
pulse current;
magnesium matrix ... See more keywords