LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "sicp composites" as a keyword



Cu/SiCP Composites Prepared by In-Situ Carbonization Synthesis

Sign Up to like & get
recommendations! Published in 2019 at "JOM"

DOI: 10.1007/s11837-019-03483-y

Abstract: Cu/SiCP composites with high strength and high conductivity were prepared by in situ carbonization reaction of silicon. The Cu-Si powder and C powder were mechanically mixed, and in situ carbonized at 850°C for 48 h, then… read more here.

Keywords: prepared situ; situ carbonization; sicp composites; mpa ... See more keywords

Study of the microstructure and mechanical characteristics of AZ91–SiCp composites fabricated by stir casting

Sign Up to like & get
recommendations! Published in 2020 at "Archives of Civil and Mechanical Engineering"

DOI: 10.1007/s43452-020-00071-9

Abstract: In recent years, the composite materials have been very desirable by researchers for many engineering applications such as aviation and biomedical because of the tremendous characteristics of magnesium matrix metal composite. This current investigation aims… read more here.

Keywords: sicp composites; microstructure mechanical; stir casting; az91 sicp ... See more keywords

Methodology for dependence-based integrated constitutive modelling: An illustrative application to SiCp/Al composites

Sign Up to like & get
recommendations! Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.03.257

Abstract: Abstract In industrial forming and machining process, the large plastic deformation of material takes place in wide loading ranges of strain-rate and forming temperature. A satisfactory modelling of quasi-static and dynamic material behaviors is of… read more here.

Keywords: methodology; quasi static; static dynamic; dependence based ... See more keywords

Simulation of temperature distribution and discharge crater of SiCp/Al composites in a single-pulsed arc discharge

Sign Up to like & get
recommendations! Published in 2020 at "Chinese Journal of Aeronautics"

DOI: 10.1016/j.cja.2020.05.033

Abstract: Abstract SiCp/Al composites are difficult-to-cut materials. In recent years, electrical arc discharge machining has been developed to improve the machinability of these materials. However, there is a big challenge to build a satisfactory heat transfer… read more here.

Keywords: sicp; temperature; arc discharge; discharge ... See more keywords

Electromagnetic stirring control for resistance spot welding of SiCp/Al composites

Sign Up to like & get
recommendations! Published in 2021 at "Journal of Manufacturing Processes"

DOI: 10.1016/j.jmapro.2021.06.048

Abstract: Abstract Metal matrix composites (MMCs) have broad application prospects in high-end manufacturing fields. However, as typical MMCs, SiCp/Al composites have poor weldability due to the appearance of brittle phase, crack defects, and segregation phenomenon in… read more here.

Keywords: sicp composites; resistance spot; spot welding; welding sicp ... See more keywords

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

Sign Up to like & get
recommendations! Published in 2021 at "Materials Characterization"

DOI: 10.1016/j.matchar.2021.111402

Abstract: Abstract The deformation behavior and damage mechanism of 17 vol% SiCp/Al composites under biaxial loading were studied by biaxial tension and nano-indentation tests. The results showed that in the process of biaxial tension, the composite in… read more here.

Keywords: biaxial tension; damage; composites biaxial; sicp composites ... See more keywords

Fracture behaviour of SiCp/Al composites with network architecture

Sign Up to like & get
recommendations! Published in 2020 at "Materialia"

DOI: 10.1016/j.mtla.2020.100725

Abstract: Abstract It is found that, for discontinuous metal matrix composites (MMCs) with an inhomogeneous network reinforcement distribution, a thin network layer and large alloy cells are favorable for the toughness.. The network layers contribute to… read more here.

Keywords: network; behaviour sicp; fracture behaviour; alloy cells ... See more keywords

Effect of porosity and interface structures on thermal and mechanical properties of SiCp/6061Al composites with high volume fraction of SiC

Sign Up to like & get
recommendations! Published in 2019 at "Transactions of Nonferrous Metals Society of China"

DOI: 10.1016/s1003-6326(19)65003-x

Abstract: Abstract 50 vol.% SiCp/Al composites with high thermal and mechanical properties were successfully produced by spark plasma sintering technique. The influences of sintering temperature on the thermal conductivity, coefficient of thermal expansion and bending strength… read more here.

Keywords: sicp composites; mechanical properties; effect porosity; composites high ... See more keywords

Experimental analysis of drilling forces and edge defects in SiCp/Al composites using PCD drills

Sign Up to like & get
recommendations! Published in 2025 at "Materials Research Express"

DOI: 10.1088/2053-1591/adb3f7

Abstract: SiCp/Al composites are increasingly utilized in electronics, automobiles and other fields, where their drilling process significantly impacts their application and reliable performance. This study presented an experimental investigation into the thrust drilling forces and edge… read more here.

Keywords: sicp composites; edge defects; drilling forces; thrust drilling ... See more keywords

Effect of Ni–P alloy coating on microstructures and properties of vacuum brazed joints of SiCp/Al composites

Sign Up to like & get
recommendations! Published in 2017 at "Modern Physics Letters B"

DOI: 10.1142/s0217984917500828

Abstract: Compared without electroless Ni–P alloy coating on the SiCp/Al composites, the paper describes the effect of Ni–P deposited layer on the microstructure evolution, shear strength, airtightness and fracture behavior of vacuum brazed joints. Void free… read more here.

Keywords: alloy; effect; brazed joints; vacuum brazed ... See more keywords

Study of the residual stress distribution in SiCp/Al composites under thermal cycling conditions

Sign Up to like & get
recommendations! Published in 2024 at "Journal of Composite Materials"

DOI: 10.1177/00219983241302165

Abstract: In this study, a three-dimensional random representative volume element model was constructed using the finite element method combined with Python script to investigate the residual stress distribution in SiCp/Al composites with varying volume fractions, particle… read more here.

Keywords: stress distribution; sicp composites; residual stress; thermal cycling ... See more keywords